Professional Documents
Culture Documents
Product Inforrnation
Sheet
PC t671
METACARE COATINGS Preserve National Assets
Asiochlor CP 620
Single pack, air drying, chlorinated rubber anti-corrosive primer with zinc phosphate pigment
Features
* * *
Technical Data
Colour
Gloss
Red oxide and Grey
Matt Approx.45
7o
Volume solids
Recommended dft
coat
35 - 50 microns
Surface dry
30 minutes
Hard dry
4 hours
16 hours
Min. Max.
Unlimited, provided the surface is dry and clean from all contamination.
1of
PC 1677
Shelf life (cool & dry Flash
place) : :
Atleast l2 months
point
{Jse
Directions for
If blast cleaning is inrpractical, remove loose rust / scale using power tools / hand tools to achieve St 3 / St 2 grade of surface preparatiorr, as per Swedish standards. Remove contlminants like grease, oil etc. with aromatic solvents. Ensure the surface is clean and dry
before prirning.
Non-ferrous surface, sufficierrtly roughened with emery paper & dry and free from all
contamination. Substrate telnperature should be atleast 3"C above dew point but ttot above 50"C.
:
I\lixing
If settling
is observed in the drum, loosen the settled material with the help of hand stirrer tollowed by powcr drive.n stirrer for quick hotnogenous mixing.
Application
Brush
/ Roller
T- t31tr
O-lOo/a
-2007
Air spray
Recommended thinner Volnme of thinner Nozzle orifice
T- r-ll tT
0-20c/c
I ..5
-2007
Nozzle pressure
- -J.0 rnrn 0.3 - 0.4 MPa (= approx. 3-4 atrn; 43-57 p.s.i.)
Airless spray
Recommended thinner Volunre of thinner Nozzle orifice
T-
lll lT -2001
5-157a
0.38 - 0.46 nrm
Nozzle pressure
2of3
5
Storage
Storage
PC 1671
& Packing
: :
Store in a cool, dry place. Store in accordance with local regulations.
'
Packing
20litres
Safety Information
As a general safety measllre, inhalation of solvent vapours or paint mist and contact of liquid paint with skin & eyes, should be avoided. Forced ventilation should be provided when applying paint in confined spaces or stagnant air. Even when ventilation is provided, respiratory, skin and eye protection are always recommendecr when spraying paint.
Please refer our Material Safety Data Sheet prior to using the product.
Disclaimer
'fo the best of our knowledge the intirrmaiion prnvided herein is true and accurare . . at the dale of issualce. Since we have no contnrl ovcr the quality rne subsrrate or rrre varitxs ractors arlecti'g rrrc use anrlr-,,.-,""'1,',''#*l:1ili {INDIA} LIMITED we do not accept any responsibility or l.iahility arising out of use of the product. Tlre conrpany reserves the right to nrotlity daiil contained hetein witlrout prior Marketing-lndustrialPrrxlucts notice. Any change in data would norrnally tre tirllowed by issue of a nerv dala Plot Ni). 5. ciliwrdi Industrill Esurc. Ofl S. V R,){d. Go,rgar)n (W}, Muilbri -.1{XX)62 sheet. The usel should rrtreck with the nearest sales ol'lice Of the contonnv and
aSian
paintS
lfu
O tr
conlirtnthevalidityoftheintirrmation.priortousingllrepnrduct.
Issue date : February 2000
Tclr{{)22)-875122tt Fax:1022i,-8744177
3 of 3