Professional Documents
Culture Documents
TYPICAL Physical and Mechanical Characteristics of RUBBER COMPOUNDS Maden by KAITON
TYPICAL Physical and Mechanical Characteristics of RUBBER COMPOUNDS Maden by KAITON
Suite 8, 176 Finchley Road, London, NW3 6BT, UNITED KINGDOM, Reg. No 5304451 Phones +44 192 382 6286 +380 50 328 5972 +359 884 676 884 +372 59 479 477
7. Modification rate of the conventional tensile strength after aging in air,% not less than: At temperature of (1001) during 72 hours. At temperature of (1251) during 72 hours. 40 -
8. Modification rate of elongation at break after aging in air,%, not less than:
45
50
50
60
50
60
65
7. Nominal tensile strength after aging in air at a temperature of (125 1) C for 168 h MPa, not less 8. 8. Elongation at break after aging in air at a temperature of (125 1) C for 168 hours
10,0
300
*- G-1 and G-2 are flame resistant grades for solid mining conveyor belts. Rubber compound second stage (vulcanized) based on NR 1. Tensile strength, MPa - 8.5 2. Elongation% - 350-400 3. Hardness by Shore A - 70 + / - 3 Sh 4. Specific Gravity - 1.17 mm3 5. Curing time at 180o / 190oC - 2,10 m Rubber compound second stage (vulcanized) based on SKD-L/SKI-3 1. Hardness by Shore A 75 + / - 5 Sh 2. Tensile strength, Mpa - 14-16 3. Elongation - 250-300% 4. Abrasion - 120 mm3 5. Density - 1.18 cm3 Rubber compound second stage (vulcanized) based on EPDM 1. Tensile strength, MPa - 9.0 2. Elongation% - 250/300 3. Hardness by Shore A - 70 + / - 5 Sh 4. Specific Gravity - 1.17 mm3 5. Curing time at 180o / 190oC - 2,10 m Rubber compound second stage (vulcanized) based on EPDM 1. Tensile strength, MPa - 8.5 2. Elongation% - 280 3. Hardness by Shore A - 55 Sh 4. Specific Gravity - 1.17 mm3 5. Curing time at 180o / 190oC - 2,10 m ALL OF RUBBER COMPOUNDS MADE IN EU PACKING WIG- WAG OR CUT SHEETS TRANSCRIBED BY PE FILM
OFF-SPEC RUBBER COMPOUND, PROTECTOR GRADE, BASED ON SBR+SKI (Russia Origin): 1st tab: Residual strain - 36 Elongation - 710 Pressure (load) - 108 Shore hardness - 50. 2nd tab: Residual strain - 50 Elongation - 670 Residual strain - 85 Shore hardness - 47 3rd tab. Residual strain - 36 Elongation - 580 Residual strain 129, Shore hardness -62.