Nero StartSmart allows you to copy a CD to a blank CD in a few easy steps. You can select the number of copies you wish to make, and the source and destination drives. Select the 'Quick Copy' option to copy directly from the source to the destination drive. No space will be used on your hard drive.
Nero StartSmart allows you to copy a CD to a blank CD in a few easy steps. You can select the number of copies you wish to make, and the source and destination drives. Select the 'Quick Copy' option to copy directly from the source to the destination drive. No space will be used on your hard drive.
Nero StartSmart allows you to copy a CD to a blank CD in a few easy steps. You can select the number of copies you wish to make, and the source and destination drives. Select the 'Quick Copy' option to copy directly from the source to the destination drive. No space will be used on your hard drive.
1. First to launch Nero StartSmart: Go to Start->All Programs->Burn a CD or
Data DVD->Nero StartSmart. Or you can just go to Start->Nero StartSmart
2. This will bring up the Nero StartSmart main window. Select the Copy and Backup icon, and then click on Copy Disc option.
3. This brings up the Nero Express Select source and destination window.
4. Place the disc you wish to copy, Music CD, Data CD, Video CD, etc. in the Source drive and place a blank CD in the Destination drive.
Click on More, after you have placed your medium in the drives. Or click Burn to begin the Write operation to the CD.
5. If you selected Burn, you will go to the final step; If you selected the More option, you will get a drop down for more added control of the write method used.
1) Determine maximum speed The speed test determines how quickly the compiled files can be accessed. If the access speed is slower than the burning speed, the burning speed is reduced so as to avoid a poor or failed write operation.
2) Simulation - The simulation runs all the steps involved in burning a medium apart from activating the laser beam, so that you can assume that if the simulation is successful, the burning process will also be successful. Use this to avoid wasting any CDR media on failed writes.
3) Write - This checkbox starts the actual physical burning process.
4) Image File Use this option to select .ISO, .CUE , or .NRG image files and burn to CD.
Note: Select the Quick Copy option to copy directly from the source to the destination drive. No space will be used on your hard drive. (This will only be selectable if you have a CDROM/DVDROM to use as a source drive, or if you have more than one recorder so you can use one as the source and one as the destination drive. Note: Be sure the proper Source and Destination drives are selected. Note: Select the number of copies you wish to make. Note: This feature only shows up if you do not use Quick Copy. 6. Nero Express then begins the burn process.
7. When the write has been completed successfully, you will see the below window.
Click the OK button to continue.
Note: This is an indicator of your temporary buffer level on your Hard Drive, being used by Nero during the burn. Note: This is the progress bar of the actual write process Note: This is an indicator of your buffer level on the Recorder. 8. This brings up the Burning Process window. Click on Next to continue.
9. And this brings us to the completion of the CD copy process. Here you can choose too Burn the same project again; start a New project; launch the Nero Cover Designer to create a label; or Exit the Nero Express program.