The service and load determines the UE sensitivity; in general, in no-load
condition, the sensitivity is between -105dBm and -120dBm. For Ericsson, the UE sensitivity level is calculated at around: CS12.2: -119 dBm PS-64: -112 dBm PS-128: -110 dBm PS-384: -105 dBm HSDPA: -95 dBm 2) What is a typical NodeB sensitivity level? The service and load determines the NodeB sensitivity; in general, in a no-load condition, the sensitivity is between -115dBm to -125dBm. For Ericsson, the NodeB sensitivity level is calculated at around:
CS12.2: -124 dBm PS-64: -119 dBm PS-128: -115 dBm PS-384: -115 dBm 3) What is a typical NodeB maximum output power? The maximum NodeB output power is usually 20W or 40W, that is, 43dBm or 46dBm. Also up to 100W
4) What is UE maximum transmit power in your link budget? UE Transmit Power limit is 21dBm. 5) What is a typical maximum path loss? : The maximum path loss is dependent on the service and vendor recommendations; typically it is in between 135 to 140dB for urban areas and between 150 to 160dB for rural areas.
6) What is the difference between dB and dBm?
: dBm is a unit of power level, measured in milli-watts in logarithm scale, that is, dBm = 10 * log(W*1000) where W is the power in Watts dB is not a unit, it is the difference in dBm.
7) Why We have Different AMR Source rates: 12.2 (GSM-EFR), 10.2, 7.95, 7.40 (IS-641), 6.70 (PDC-EFR), 5.90, 5.15 and 4.75 kbps?Is there any benefit to keep 7.95 and 7.40? Ans:We have different Source rates to compitable with current technology. For example:7.4 kbps is equal to the US-TDMA speech codec. 6.7 kbps is equal to the Japanese PDC codec.
8) What is Mobile Number Portability (MNP)? Mobile Number Portability (MNP) enables Mobile telephone users to RETAIN their mobile telephone number, when changing from one service provider to another or their Location. In this, if a customer is dissatisfied on the service by mobile operator either he has to reluctantly accept the service or switch to another service provider that he wishes. In the later case, he has to drop his identity, the mobile number. In most cases when the mobile number is used for all business and family correspondence, it becomes generally impossible to leave the number. To overcome these hardships, the concept of MNP (Mobile Number Portability) was introduced. Types of Number Portability :- * Service Provider Number Portability: Subscribers can change the service provider while retaining the same phone number It is also called operator portability. * Location Number Portability: Subscribers can change their service location while keeping the same mobile telephone number. * Service Portability: Subscribers can change the subscribed services while retaining the same telephone number. It allows the subscribers to enjoy the subscribed services in the same way when they roam outside their home networks.
9) There are several Event in 3G Event 1A: UTRAN will add the new cell in the UEs active cell list and will send an ACTIVE SET UPDATE message. Event 1B: UTRAN will send ACTIVE SET UPDATE message to remove the cell from UEs active set. Event 1C: UTRAN will send ACTIVE SET UPDATE message that will remove one or more cells and will add one or more cells. The only restriction for 1C is that there should be at least one radio link that is not affected by the procedure.