You are on page 1of 3

Dattatray Jagalpure

Contact Detail
Reliance Industries limited, Jmangar
Mob. No.: +919662506965
E-mail ID: dattatray.jagalpure@ril.com
Datta33jagalpure@gmail.com

A career in an organization in the oil and gas domain that provides an environment to apply
my technical skills, knowledge and experience; while providing excellent opportunities for further
learning and career growth.


Process Engineer, Reliance Industries Limited, Jamnagar July11 to Present
Designation : Manager
Industry : Refining
Experience : 3 yrs.
Discipline : Chemical Engineering.
Current CTC : 7.00 Lacs /Annum
Expected CTC : As per company policy


Process Engineer

Reviewing Process Flow Diagrams, Piping and Instrumentation Diagrams, Cause & effect charts,
Equipment Datasheets and Drawings. (Desalination unit (IDE Technology) Sea water filtration,
DM, Cooling Tower, Condensate System, Air Compressors & Dryers, ASUs (Cryogenic
distillation), spent caustic, Wet air oxidation, etc.)
Experience of Process plant Simulation tools like ASPEN Plus, HTRI, Pipenet etc.
Experience in development of Process design, PFDs, P & IDs, Heat & Mass balance.
Experience in HAZOP reviews of new facilities.
Conduct Test runs to optimize process variables and evaluate plant performance and identify
bottlenecks.

Prepared daily reports for plant performance, material balance & explained deviation reasons.
Process Performance Monitoring & Troubleshooting and issue technical reports.
Prepared chemical-Chemical interaction matrix for chemicals used in plant.
Startup and Turnaround support to Operations- inspection of equipment such as columns, vessels,
reactors, etc. in accordance with drawings, datasheets.
Rating, Design analysis of heat exchangers using HTRI.
Preparation and Monitoring Raw material, Energy, Utility and chemicals consumption norms.
Process engineering study for :
Performing Design Calculation with relevant International Standard and Codes which includes:
A) Hydraulic calculations and line sizing for liquid, gas and two-phase lines for J3 projects
B) Pump performance evaluation for post J3.
C) Liquid N2 transfer up to long distance with vacuum jacketed pipe (perlite).
D) Run Desalination using LLP steam.
CAREER OBJECTIVE
PROFESSIONAL PROFILE
Summary Of Professional Work Experience
Work Experience
Identify and implement modifications / improvement plans through MOC (Management of
Change). It involves -
1. Identification / Review of profit improvement schemes.
2. Estimation of cost benefit, simple pay back & impact on process & environment.
3. Generation of Schedule A package.
Profit Improvement planning program coordination at Jamnagar Refinery

Safety Critical Tasks and Environment
Hazop Study
To fulfill designated role in emergency team as required.
To provide safe and efficient first line response to plant malfunctions.
Area inspections and Safety Audit tours to maintain and operate equipment to minimize potential
for fugitive losses and accidental oil/chemical spills.
To adjust plant operating parameters on instructions from supervisor to achieve stack related
targets etc.
Process Engineer-Support and simulation group Jan12 to Feb13

Developed the Steam Model, N2-Air Model, Power Model & Water Model on KBC Sigma fine to
determine overall Mass Balance on the refinery
Worked with 15-20 peoples before establishing the feed-proof data
Models improved measurement performance by detecting gross errors in measuring the meters
and tank ATG
Validated entire Refinery Design/lines and P&Ids to duplicate the Refinery design on the models
Worked with the team of Instrumentation and Mechanical Engineers for identification and
rectification of invalid flows and correcting the incorrect Venturi, Orifice, mass-flow, Custody transfer
meters. Model further used for accounting to calculate unit wise & overall GRM of the refinery.
Shift Field Engineer RRTF (Reliance Industries Ld. Jamnagar): July11 to jan12

Worked as a Shift field engineer in Tank farm area.
Implementing International Safety Standards in Plant.
Involved in commissioning of new project for transfer of Ortho xylene to Jetty.
Done sampling of different Products like ATF, Diesel, Gasoline also checked their specification
Prepared COSHH (Cause of the substance hazardous to Health) file of different chemicals.
Trainee Engineer at Rashtriya Chemical Fertilizer, Mumbai: May-June2010
Area: Urea Complex
Knowledge of operations, Safe start-up & Shutdown.
Working with RCF representatives to find out the major critical problems in Urea Plan.

Taken the Six Sigma Yellow Belt certification.
Has done 7 days Training on Aspen Plus Chemical Engineering Tool in Reliance.
Training on basics of Advanced Process Control implemented through ASPEN DMC Plus.
Heat Integration for Energy Conservation: Pinch Technology
Heat exchanger network design for maximum heat recovery
Multiple Pinch network design and evolution
Heat exchanger network area & cost targeting
Retrofitting for energy saving
TRAINING & PROJECTS
Steam Consumption analysis, evaluation and improvements:
Results reduction in steam consumption by 5 %, Total savings 5Lacs per annum.
Aromatics Shutdown:
Worked in Aromatics Complex Shutdown in team of general inspection and tray replacement job.
Inspected Xylene & Isomer Heaters and tracked the Isomer Heater convection zone tube
installation to minimize the heat loss from heater.
Supervised and ensured Proper Bed replacement job in Vacuum Distillation unit to carry out.
Crude Shutdown:
VGO recovery from VR & Diesel recovery from LVGO as per PCS Revamp
Supervised and ensured Proper tray replacement job in Atmospheric distillation unit
Detected trays damaged due to flooding & rectified the tray support rings at each stage.
Software:
Well conversant with process engineering software tools such as HTRI, Aspen-plus, Pipenet,
Super target.
Enjoys taking on new responsibilities with a positive attitude Ability to start with an idea and work
on it till implementation.
Excellent team spirit - Proven ability to work both as a team leader and as a team member
Ability to use applied research and analytical skills to solve problems.
Proficient in using Microsoft Office tools (Word, Excel, PowerPoint, and Visio)


Mr. Ramesh R Rajaram, Senior Manager, Mr. Abhay Thuturkar, Manager,
CTS, Reliance Industries Limited, CTS, Reliance Industries Limited.
Ph. No. 09998216337 Ph. No.09998958045

Fathers Name : Suryakant Govind Jagalpure
Date of Birth : 15
th
November 1989
Permanent Address : 443, Shashtri Chowk, Udgir, Maharashtra-413518
Date:
Place: Jamnagar (Dattatray S. Jagalpure)




SKILL
EDUCATIONAL QUALIFICATION
Year Degree Institute/School % Distinction
2011
B.TECH
(Chemical)
Laxminarayan Institute of technology, Nagpur
71.31
%
Top 15% among
160
2007 HSC Dayanand Science College, Latur
71.17
%
--
2005 SSC Yashwant Vidyalaya, Wadhona, Dist-Latur
83.20
%
2
nd
among 200
REFERENCES
PERSONAL PROFILE

You might also like