Professional Documents
Culture Documents
Calibracion de Sistema de Frenos Palas Case Series C y D
Calibracion de Sistema de Frenos Palas Case Series C y D
releases brake pump flow to the accumulators when the pressure of those
accumulators drops below the cut-in pressure. A relief, built into the charge valve,
immediately releases brake pump flow to tank once the accumulator cut-out
pressure is reached.
Verify brake operating pressures using the chart below, pressures are detailed
by bar [psi].
Accum.
Cut-in
Pressure
Accum.
Cut-out
Pressure
Accum.
Charge
Pressure
(nitrogen)
Brake
Cylinder
Pressure
(front)
Brake
Cylinder
Pressure
(rear)
621C - prior
to
JEE0123546
132-139
[19152015]
187-194
[27152815]
55-57
[800-825]
51.7-58.6
[750-850]
48-55
[700-800]
621C JEE0123546
and after
132-139
[19152015]
187-194
[27152815]
55-57
[800-825]
86.2-93.1
[1250-1350]
82.7-89.6
[1200-1300]
721C - prior
to
JEE0123290
132-139
[19152015]
187-194
[27152815]
55-57
[800-825]
58.6-65.5
[850-950]
55-62
[800-900]
721C JEE0123290
and after
132-139
[19152015]
187-194
[27152815]
55-57
[800-825]
86.2-93.1
[1250-1350]
82.7-89.6
[1200-1300]
821C - prior
to
JEE0123403
132-139
[19152015]
187-194
[27152815]
55-58
[800-840]
58.6-65.5
[850-950]
55-62
[800-900]
821C JEE0123403
and after
132-139
[19152015]
187-194
[27152815]
55-58
[800-840]
86.2-93.1
[1250-1350]
82.7-89.6
[1200-1300]
921C - prior
to
JEE0123252
132-139
[19152015]
187-194
[27152815]
55-57
[800-825]
69-75.8
[1000-1100]
65.5-72.4
[950-1050]
921C JEE0123252
and after
132-139
[19152015]
187-194
[27152815]
55-58
[800-840]
96.5-103.0
[1400-1500]
93.1-100.0
[1350-1450]
521D
147-167
[21302422]
190-196
[27562843]
53-57
[775-825]
60-66
[870-987]
57-63
[825-943]
621D
147-167
[21302422]
190-196
[27562843]
48.0-58.6
[700-850]
90-97
[1305-1407]
87-94
[1260-1363]
721D
162
[2350]
193
[2799]
55
[798]
90
[1300]
86
[1250]
Machine
*Note: If the 21D Series Wheel Loader pressures are outside of the specified
operating range, inspect and replace the brake valve as necessary.