Professional Documents
Culture Documents
7
BROADBAND CATALOGUE
FIBRE OPTICS
Solution for distribution of terrestrial TV and satellite IF signals (analog and digital) over large collective installations: residential districts,
hotels, hospitals.
Accessories
Distribution and Splice kits.
Application example
FTD-420
TERRESTRIAL TV
1 POLARITY
SATELLITE
HEADEND
TERR. + SAT
OPTICAL NODE
RX-1
FRD-400
FTD-314
FRR-310
OPTICAL NODE
RX-2
1:3
FRD-350
COAXIAL
NETWORK
E
FTR-301
FTR-301
TERRESTRIAL TV
1 POLARITY
SATELLITE
HEADEND
TERR. + SAT
ACP-425
FTD-314
SAE-820
SAE-912
1:2
SAE-820
FTD-420
SAE
FRD-350
SAE-912
ACP-425
SAE
FRD-400
83
BROADBAND CATALOGUE
FIBRE OPTICS
FTD. TV+SAT-IF Optical Transmitter Modules
1 TV input (45-862 MHz) 1 SAT-IF input (950-2150 MHz) 1 Optical output (1310 nm). Connection of singlemode type optical fibre.
Solution for distribution of terrestrial TV and satellite IF signals (analog and digital) over large collective installations: residential districts, hotels,
hospitals.
Ultralineal, APC-controlled, 4 mW DFB (Distributed Feedback) laser. Fully compatible with PAL, SECAM, NTSC, FM, DVB-S, DVB-T, DVB-C and
other standards.
TV and SAT-IF separate ways with very high RF amplification gain. Independent OMI settings for TV and SAT-IF.
DC powered by a CFP power supply module. Mountable on baseplates or rack-frame of ClassA headend.
MODEL
FTD-420
REF.
4915
mW
RF inputs
MHz
General
RF section
Optical section
Optical wavelength
Relative intensity noise (RIN) of the laser
Optical output return loss
4 (=6 dBm)
TV (45-862 MHz)
IF (950-2150 MHz)
nm
1310 ( 20)
dB/Hz
< -150
dB
> 50
SC / APC 8
dBV
72 ... 87
dBV
72 ... 87
RF flatness
dB
dB
-15 ... 0
dB
-15 ... 0
RF input impedance
75
dB
Power requirements
DC connector type
"banana" socket
Dimensions
mm
FTD-420
230x195x32
FSP-303
FSP-304
FSP-305
FSP-306
4904
4905
4916
4917
4918
nm
Insertion loss
dB
Return loss
dB
Output isolation
dB
Input/output connectors
Dimension
FSP-302
3.7
5.5
7.2
6
1310 (40)
9.0
> 55
>55
SC / APC 8
mm
230x195x32
FSP-303
84
BROADBAND CATALOGUE
FIBRE OPTICS
FRD. Compact TV+Sat-IF Optical Receiver
1 optical input (1290-1600 nm) 1 RF output (45-2150 MHz).
Connection of singlemode type optical fibre.
Especially designed for the delivery of terrestrial and satellite signals (analog and digital) over large collective installations.
Mains powered, 50/60 Hz. Electrical safety protection level: Class II. Insertable power cord with bipolar plug.
Injection-moulded zinc alloy housings. Wall-fixing. Indoor mounting. Grounding terminal.
MODEL
FRD-400
REF.
4914
Optical window
Forward RF output frequency
Optical section
dBm
-4 ... +1
MHz
Optical wavelength
nm
1290 - 1600
dB
> 50
Analogue TV
IF
Analogue TV
CNR
RF - Forward way
RF Reverse way
General
IF
SC / APC 8
dBV
119 1 / 104 2
dBV
120 3 / 105 4
52.5 5 / 50 6
dB
FRD-400
36 7 / 33.5 8
CTB
dB
59 5 / 63 6
RF flatness
dB
dB
0 - 15
dB
0 - 15
dB
Output test
dB
-30
Bandwidth
MHz
Through loss
dB
Mains voltage
VAC
230 - 240
Consumption
15
Dimensions
mm
222x140x44
Application example
85
BROADBAND CATALOGUE
FIBRE OPTICS
FTR. Compact Return Path Optical Transmitter
1 RF input 5-300 MHz 1 optical output 1310 nm. Connection of singlemode type optical fibre.
Application in two-way HFC networks that deliver data services to their subscribers (broadband internet access, VOD, IPTV, VoIP, etc.).
Fabry-Prot laser of 1 mW.
An optical budget of 6 dB is available between the transmitter and the related FRR receiver module.
Mains powered, 50/60 Hz. Electrical safety protection level: Class II. Insertable power cord with mains plug.
Injection-moulded zinc alloy housing. Wall-fixing.
Indoor mounting. Grounding terminal.
MODEL
FTR-301
REF.
4906
mW
MHz
5 - 300
nm
1310 ( 20)
dB/Hz
< -140
Optical section
RF section
RF output level
General
dB
1 (= 0 dBm)
> 55
SC / APC 8
dBV
75 ... 90
RF flatness
dB
0.5
dB
-15 ... 0
RF input impedance
75
dB
> 15
Mains voltage
VAC
230 - 240
Consumption
Dimensions
mm
150x50x55
Application example
RF input
Optical Signal
Output
86
BROADBAND CATALOGUE
FIBRE OPTICS
FRR. Return Path Optical Receiving Modules
1 optical input 1290-1600 nm 1 RF output 5-300 MHz. Connection of singlemode type optical fibre.
Application in two-way HFC networks. The RF signal at the output of the receiver module is used in the headend to deliver data services to the
subscribers (broadband internet access, VOD, IPTV, VoIP, etc.). On an alternating application, such a signal could bring to the headend, as TV
channels, events and images originated in particular sites of the network and transmitted via optical node.
Low-noise PIN photodiode operating in the linear section of the optical power - electrical current transfer function.
DC powered by a CFP power supply modules. Mountable on baseplates or rack-frame of the ClassA headend.
MODEL
FRR-310
REF.
4907
dBm
RF output frequency
MHz
5 - 300
Optical wavelength
nm
1290 - 1600
dB
Optical
section
Optical window
RF section
> 50
SC / APC 8
RF output level
General
-6 ... +1
dBV
75
RF flatness
dB
0.5
dB
0 - 15
RF output impedance
75
dB
> 15
RF output test
dB
-20
Supply voltage
VDC
+12
Consumption
mA
85
DC connector type
"banana" socket
Dimensions
mm
FRR-310
230x195x32
Application example
87
BROADBAND CATALOGUE
FIBRE OPTICS
FKH. Distribution and Splice KITs - Headend Site
Construction of optical splice and fibre distribution centres at the headend site.
The kits include a rack-mount cabinet with a slide-out tray where the splice tray holders are fixed, and a complete set of loose accessories required for the application: splice protectors, pigtails, SC/APC adapters and stoppers. The side wings of the cabinet are movable,which allows an
offset of the front panel.
Three models made for with 1, 2 or 3 four-fibre cables.
MODEL
REF.
CAPACITY (SPLICES)
FKH-104
FKH-208
FKH-312
4909
4910
4911
12
Splice protectors
SC/APC pigtails - 1 metre, 900 microns
12
20
16
12
SC/APC adapters
Stoppers
FKH-104
FKH-208
FKH-312
FKR-104
4908
4
Splice protectors
SC/APC pigtails - 1 metre, 900 microns
SC/APC adapters
88
Mounting diagram of the FKR-104
BROADBAND CATALOGUE
FIBRE OPTICS
Mechanical Splicing of Optical Fibres
MODEL
REF.
FEE-100
4919
FEM-060
4920
DESCRIPTION
MECHANICAL SPLICING EQUIPMENT
Consists of : a) Assembly tool; b) Stripper; c) Cleaver; d) Scissors; e) Gauzes; f) Bottle
of isopropyl alcohol; g) Splice Units (6).
Montage sequence
REF.
DESCRIPTION
FCA-400
4912
FJU-100
4913
89