Professional Documents
Culture Documents
(8)
Welcome.
My account Sign Up
PRODUCTS
RECEIVE CALLS
HOW IT WORKS
ALL SERVICES
FEATURES
RATES
SUPPORT
CONTACT US
Search
Supported devices
Grandstream DP715/710
ATA Adaptors
IP Phones
Cordless DECT IP Phones
IP PBX Software
Desktop Softphones
GENERAL INFORMATION
Grandstream's DP715/710 is a reliable inexpensive DECT cordless IP Phone that works with the
Callcentric service when placed behind your broadband internet router. You can add up to 5 cordless
hansets to the DP715 base unit.
Mobile Softphones
3CX
3CX Version 6
3CX Version 12
3CX Version 12.5
3CXPhone (for Windows)
3CXPhone (Mobile)
Aastra 6753i
RESOURCES
Websites
Grandstream DP715/DP710 official product page
Support
Grandstream DP715 manual
Step 1
Connect your router with the supplied Ethernet network cable to the DP715. Now connect your
phone to the DP715. Finally plug the supplied power cable into the DP715.
Cisco SPA112/SPA122
CloudTC Glass 1000
CSipSimple
Once the device is fully powered up, pick up the phone connected to the DP715 and dial the * key
3 times. Once you hear the menu enter 0 2 on your phone. You will now hear a message giving
you the IP address of your DP715. I.E.: 192.168.001.010. Record this information.
D-Link DVG-1402S
Ekiga
Elastix
Gigaset A510 IP
Gigaset C610A IP
Gigaset DX800A
Step 2
Grandstream DP715/710
Grandstream GXP1450
Grandstream GXP2110
Please note: some browsers will require you to remove leading zero's ( 0 's ) in the IP address. For
example if you heard 192.168.001.010 you should change this to 192.168.1.10.
Grandstream GXP2200
Grandstream GXV3140
Enter the password for the DP715 in the password field. The default administrator password for the
DP715 is admin. You should be taken to a splash page showing your device's registration status,
firmware... etc:
pbxnsip
pbxnsip Version 3
PhonerLite
Polycom SoundPoint IP 601
snom 1xx/2xx/3xx
snom 820
snom M9
snom ONE
SFLphone
SJphone
Telco AC-211
trixbox / Elastix / pbx-in-a-flash
Twinkle
Windows Messenger
UTStarcom F3000
Vodia PBX
Vtech VSP600
Vtech VSP725
Vtech VSP735
X-Lite / X-Pro / eyeBeam
Yealink T32G
Yealink W52P
Yealink T42G
Yealink T46G
Yeastar MyPBX U100
ZoIPer
ZoIPer 3.2
ZoIPer Mobile
Step 3
Zoom 5801
Other Linksys/Sipura products
Setting
Value
callcentric.com
Outbound Proxy
callcentric.com
SIP Transport
UDP
After filling in the fields as directed click the Update button at the bottom of the page. Your device
will reboot. After waiting 30 seconds you should be ready to configure your account credentials.
Step 4
Value
SIP User ID
Authenticate ID
Authenticate Password
Enter your extension SIP Password here. Your extension SIP password is the
password you created for the extension you are trying to use. You may edit the
SIP password you wish to use in by logging into your My Callcentric account and
clicking on the Extension menu link and then modifying the appropriate extension.
Name
Once the changes have been made click save then at the top of the page select Apply and wait 30
seconds then you're done.
Step 5
After 30 seconds, click BASIC SETTINGS link listed at the top of the page.
On the Basic Settings page click the Reboot button to reboot your DP715. Please wait at least 90
seconds for the unit to finish rebooting. Once the unit has finished rebooting you should no longer
see the light on top of the DP715 blinking red. If the light is no longer blinking red then your unit
is configured and ready to make calls.
You should now see that your device is properly registered to your Callcentric account.
If the light on the top of the DP715 is still blinking red, please wait 2 minutes and then unplug the
power, wait 10 seconds and plug it back in. If after another 2 minutes the light continues to blink
red please verify that the settings you entered into the DP715 in step 9 are correct, and that your
internet connection is currently up and running.
Step 6
About Us | Blog | Privacy Policy | Terms & Conditions | Money Back Guarantee | 911/E911 | Contact Us | Agent Program