Professional Documents
Culture Documents
constructive solutions
Design Criteria
UV stable
Properties
Standard compliance
Characteristic
Percent solids:
Tensile yield (TT-S-00230C):
Elongation
(ASTM D-412):
Sag TT-S-00230C (COM-NBS):
Hardness Shore 'A'
TT-S-00230C (COM-NBS):
Service temperature range:
Water resistance
TT-S-00230C (COM - NBS):
Skin time (50% R.H):
Cure time:
6.34 mm dia. bead at 24oC,
50% R.H.
Result
Minimum 97%
2
20.7 N/mm
500 - 600%
(90% recovery)
None
30 - 40
o
-40 to 100 C
Passes
o
2 - 4 hours at 24 C
24 - 28 hours
Preparation
Ensure joint sides are square, clean and dry. Remove
any laitance, dirt or other contaminants by wirebrushing,
grinding or grit blasting.
Application
Priming
Cleaning
Page 1
Nitoseal HP40
Estimating
Precautions
Supply
Nitoseal HP40:
Primer 4:
Primer 7:
Fosroc Solvent 102:
Storage
Shelf life
Fire
Disposal
grease,
wax,
Application limitations:
Nitoseal HP40 must not be applied to frost-bearing
surfaces if temperature will be below freezing for more
than 24 hours.
Do not
Primer 4
Primer 7
o
23oC
Flash point:
10 C
Density:
0.80 kg/litre
1.05 kg/litre
Storage life:
6 months
12 months
Coverage:
60 m2/litre
12 - 15 m2/litre
Application
temperature:
5 to 50oC
5 to 50oC
Drying time:
2 to 15 mins.
20 to 60 mins.
Flash point - Fosroc Solvent 102:
33oC
For further info please contact your local Fosroc office.
Important note:
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions
for the Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that
any advice, recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct
or continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the
use of its products, whether or not in accordance with any advice, specification, recommendation of information given by it.
www.fosroc.com
email: fosam@fosroc.com
Regional Offices
Jeddah Sales Office
Jeddah Showroom
Riyadh
Dammam
Khamis Mushayt
Registered Office: Industrial Area, Phase 4, Road No. 414, Street No. 407
Page 2
FO SA/Nitoseal HP40/05/B