Professional Documents
Culture Documents
Table of Contents
Table of Contents
Chapter 4 Introduction to Boards ................................................................................................ 4-1
4.1 About This Chapter ............................................................................................................ 4-1
4.2 Main Control BoardSCU................................................................................................. 4-1
4.2.1 Overview ................................................................................................................. 4-1
4.2.2 Front Panel.............................................................................................................. 4-2
4.2.3 Subboards ............................................................................................................... 4-3
4.3 Intelligence Service UnitISU........................................................................................... 4-5
4.3.1 Overview ................................................................................................................. 4-5
4.3.2 Front Panel.............................................................................................................. 4-5
4.3.3 Subboards ............................................................................................................... 4-7
4.4 64-Port ADSL2+ Service BoardADEF/ADBF ................................................................. 4-8
4.4.1 Overview ................................................................................................................. 4-8
4.4.2 Front Panel.............................................................................................................. 4-9
4.5 32-Port SHDSL Service BoardSHEA........................................................................... 4-11
4.5.1 Overview ............................................................................................................... 4-11
4.5.2 Front Panel............................................................................................................ 4-12
4.6 ATM Interface BoardAIUG ........................................................................................... 4-13
4.6.1 Overview ............................................................................................................... 4-13
4.6.2 Front Panel............................................................................................................ 4-14
4.6.3 Subboards ............................................................................................................. 4-15
4.6.4 DIP Switches of Subboard .................................................................................... 4-16
4.7 Ethernet Interface BoardEIUB...................................................................................... 4-17
4.7.1 Overview ............................................................................................................... 4-17
4.7.2 Front Panel............................................................................................................ 4-18
4.7.3 Subboards ............................................................................................................. 4-19
4.8 64-Port SPL BoardSPLF/SPLH/SPLL.......................................................................... 4-20
4.8.1 Overview ............................................................................................................... 4-20
4.8.2 Front Panel............................................................................................................ 4-20
SCUK
RUN
ALM
ACT
RESET
Running LED
Alarm LED
Active LED
Reset button
Maintenance serial port
Maintenance Ethernet port
Monitoring serial port
Subboard port
Subboard port
HUAWEI
Table 4-1 describes the LEDs on the front panel of the SCU board.
Table 4-1 Description of the LEDs on the front panel of the SCU board
Name
Color
RUN
Green
ALM
ACT
Status description
1s on and 1s off repeatedly
On or off
Off
On
On
Off
Red
to
check
Green
Table 4-2 describes the button and the ports on the front panel of the SCU board.
Table 4-2 Description of the button and the ports on the front panel of the SCU board
Name
Function description
RESET
CON
ETH
MON/TL1
Subboard slot
4.2.3 Subboards
Follow the rules below to insert an SCU subboard.
z
Insert the subboard with four ports to the lower subboard slot only.
Table 4-3 describes the subboards that can work with the SCU board.
Table 4-3 Description of subboards attached to the SCU board
Name
Port
Port parameter
z
z
z
O4GS
z
z
z
z
z
z
z
z
z
O2GS
One
single-mode
and
multi-mode GE optical ports
one
z
z
z
z
z
z
z
z
z
z
O4FM
z
z
z
O2FM
z
z
z
z
z
z
z
z
Name
Port
Port parameter
z
z
z
E4GFA
NA
E2GA
NA
M2GA
Processing the MPLS services and occupying the upper subboard port
of the SCU board
ISUA
RUN
ALM
ETH CON
RESET
Running LED
Alarm LED
Reset button
Subboard port
Subboard port
HUAWEI
Table 4-4 Description of the LEDs on the front panel of the ISU board
Name
RUN
ALM
Color
Status description
1s on and 1s off repeatedly
On or off
Off
On
Service
channel
check
between the ISU and the
SCU has failed.
Green
Red
Table 4-5 describes the button and the ports on the front panel of the ISU board.
Table 4-5 Description of the button and the ports on the front panel of the ISU board
Name
Function description
RESET
CON
ETH
Subboard port
4.3.3 Subboards
The ISU board provides the upper and lower subboard slots, where,
z
For the ISUA board, the upper slot can hold the FE or GE optical subboard, while
the lower slot can hold only the FE optical subboard.
For the ISUE board, the upper slot can hold the FE or GE optical subboard, while
the lower slot can hold only the 4-FE-electrical-port subboard.
Table 4-6 describes the subboards that can work with the ISU board.
Table 4-6 Description of subboards attached to the ISU board
Name
E4FB
Port
Four FE electrical
ports
Port parameter
O4FBB
Four FE
multi-mode
optical ports
NA
z
Subboard position
Central wavelength:
1,310 nm
Transmission distance:
2 km
Port type: LC
ISUA upper
subboard slot
ISUA lower
subboard slot
ISUE upper
subboard slot
Name
Port
Port parameter
z
O4FBF
For FE
single-mode
optical ports
z
z
O2GAA
Two GE
multi-mode
optical ports
z
z
O2GAE
Two GE
single-mode
optical ports
z
z
One GE
multi-mode
optical port
O2GAX
One GE
single-mode
optical port
z
z
O1GAA
One GE
multi-mode
optical port
z
z
O1GAE
One GE
single-mode
optical port
Central
wavelength:
1,310 nm
Transmission distance:
15 km
Port type: LC
Central wavelength:
850 nm
Transmission distance:
500 m
Port type: LC
Central wavelength:
1,310 nm
Transmission distance:
10 km
Port type: LC
Central wavelength:
850 nm
Transmission distance:
500 m
Port type: LC
Central wavelength:
1310 nm
Transmission distance:
10 km
Port type: LC
Central wavelength:
850 nm
Transmission distance:
500 m
Port type: LC
Central wavelength:
1,310 nm
Transmission distance:
10 km
Port type: LC
Subboard position
z
ISUA upper
subboard slot
ISUA lower
subboard slot
ISUE upper
subboard slot
ISUA upper
subboard slot
ISUE upper
subboard slot
ISUA upper
subboard slot
ISUE upper
subboard slot
ISUA upper
subboard slot
ISUE upper
subboard slot
ISUA upper
subboard slot
ISUE upper
subboard slot
ISUA upper
subboard slot
ISUE upper
subboard slot
The ADEF board supports the ADSL2+ over POTS, and works with the SPLF or
SPLL board.
Huawei Technologies Proprietary
4-8
The ADBF board supports the ADSL2+ over ISDN, and works with the SPLH
board.
The ADEF or ADBF board resides in slots 06 and 915 of the MA5600 service
frame.
ADEF
xDSL0
xDSL1
RUN
ALM
Running LED
Alarm LED
xDSL port
xDSL port
HUAWEI
Table 4-7 Description of the LEDs on the front panel of the ADEF and ADBF board
Name
RUN
Color
Status description
1s on and 1s off repeatedly
On or off
Off
On
Green
ALM
Red
Table 4-8 describes the ports on the front panel of the ADEF and ADBF board.
Table 4-8 Description of the ports on the front panel of the ADEF and ADBF board
Name
Function description
xDSL0
xDSL1
SHEA
SHDSL
RUN
ALM
Running LED
Alarm LED
SHDSL port
HUAWEI
Table 4-9 describes the LEDs on the front panel of the SHEA board.
Table 4-9 Description of the LEDs on the front panel of the SHEA board
Name
RUN
Color
Status description
1s on and 1s off repeatedly
On or off
Off
On
Green
ALM
Red
Table 4-10 describes the port on the front panel of the SHEA board.
Table 4-10 Description of the port on the front panel of the SHEA board
Name
SHDSL
Function description
Provides 32 SHDSL service ports
155M ATM optical interface subboard: It provides 14 155M ATM optical ports.
The AIUG board resides in slots 06 and 915 of the MA5600 service frame.
AIUG
RUN
ALM
RESET
Running LED
Alarm LED
Reset button
Subboard port
Subboard port
HUAWEI
Table 4-11 describes the LEDs on the front panel of the AIUG board.
Table 4-11 Description of the LEDs on the front panel of the AIUG board
Name
Color
RUN
Status description
1s on and 1s off repeatedly
On or off
Off
On
Green
ALM
Red
Table 4-12 describes the button and the ports on the front panel of the AIUG board.
Table 4-12 Description of the button and the ports on the front panel of the AIUG
board
Name
Function description
RESET
Subboard port
4.6.3 Subboards
Follow the rules below to insert an AIUG subboard port.
z
Insert the lower subboard to the lower subboard slot only when you have
inserted the upper subboard to the upper subboard slot.
The subboard traffic in the upper subboard slot shall be larger than or equal to
that in the lower subboard slot.
Port
Port parameter
O1CTG
z
z
z
z
O1CTB
z
z
O2CTG
z
z
z
Name
Port
Port parameter
O2CTB
z
z
z
The E8IT.2 REV.0 subboard supports only the 75-ohm coaxial cable.
The E8IT.2 REV.A subboard supports both the 75-ohm coaxial cable and the
120-ohm twisted pair by setting the DIP switches.
Both types of E8IT subboards have five sets of DIP switches (S1S5), where,
z
The port impedance of the E8IT.2 REV.0 is 75 ohms by default, you need not
configure it.
Table 4-14 describes the settings of DIP switches.
Table 4-14 Settings of DIP switches of the E8IT.2 REV.0 subboard
DIP switch
S1
S2
S3
S4
S5
75-ohm
Bits 18: ON
Bits 2, 4, 6, 8: OFF
Bits 1, 3, 5, 7: ON
Bits 18: ON
Bits 2, 4, 6, 8: OFF
Bits 1, 3, 5, 7: ON
Bits 1, 2, 3: OFF
Bit 4: ON
The port impedance of the E8IT.2 REV.A subboard is 75 ohms by default. You can set
the DIP switches according to the cable type.
S5
75-ohm
Bits 18: ON
120-ohm
Bits 18: OFF
Bits 2, 4, 6, 8: OFF
Bits 1, 3, 5, 7: ON
Bits 18: ON
Bits 2, 4, 6, 8: OFF
Bits 1, 3, 5, 7: ON
Bit 1: OFF
Bits 14: ON
Bits 2, 3, 4: ON
EIUB
RUN
Running LED
ALM
Alarm LED
Subboard port
HUAWEI
Table 4-16 describes the LEDs on the front panel of the EIUB board.
Table 4-16 Description of the LEDs on the front panel of the EIUB board
Name
Color
Status description
1s on and 1s off repeatedly
RUN
Green
ALM
0.25s on
repeatedly
and
0.25s
Off
On
Red
Table 4-17 describes the port on the front panel of the EIUB board.
Table 4-17 Description of the port on the front panel of the EIUB board
Name
Subboard port
Function description
Provides the Ethernet upstream subboard port.
4.7.3 Subboards
Table 4-18 describes the subboards attached to the EIUB board.
Table 4-18 Description of subboards attached to the EIUB board
Name
Port
O2GS
z
z
z
z
E2GA
NA
Multi-mode
Central wavelength: 850 nm
Transmission distance: 0.5 km
Port type: LC
Single-mode
Central wavelength: 1,310 nm
Transmission distance: 10 km
Port type: LC
Applied line
Port impedance
SPLF
POTS
600 ohms
SPLH
ISDN (2B1Q/4B3T)
SPLL
POTS
Complex impedance
The SPLF/SPLH/SPLL board resides in slots 06 and 915 of the MA5600 SPL
frame.
PSTN0
PSTN1
LINE0
LINE1
xDSL0
xDSL1
SPLF
xDSL port
xDSL port
POTS port
POTS port
HUAWEI
xDSL port
xDSL port
LIN E0
I SDN1
ISDN port
ISDN0
LIN E1
xDSL0
xDSL1
SPLH
ISDN port
HUAWEI
Function description
xDSL0
xDSL1
Name
Function description
LINE0
LINE1
PSTN0
PSTN1
ISDN0
ISDN1