Professional Documents
Culture Documents
Select objects:
Command: '_zoom
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: .5x
Command: *Cancel*
Command: M
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command:
Command: _.erase 1 found
Command:
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left
Command:
Command: M
MOVE 1 found
Command:
Command: M
MOVE 1 found
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: M MOVE
Select objects: 1 found
Select objects: M
Command: *Cancel*
Command: *Cancel*
Command: M
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: M
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command: MOVE
Select objects: *Cancel*
Command: *Cancel*
Command: _u MOVE
Command: _u MOVE
Command: M
MOVE
Select objects: 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Too many objects selected for INTERSECT
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _front
Command: '_zoom
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: 2x
Command:
Command:
Command:
Command: _3darray
Initializing... 3DARRAY loaded.
Select objects: *Cancel*
Command:
Command: _vscurrent
Enter an option [2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<Conceptual>: _2 Regenerating model.
Command: _u MOVE
Command:
Command: M
MOVE 1 found
Select objects:
Specify base point or [Displacement] <Displacement>: Specify second point or
<use first point as displacement>:
Command:
Automatic save to
C:\Users\M.KHAFID\appdata\local\temp\Drawing1_1_33_9169.sv$
...
Command:
Command: <Grid off>
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.
Command:
Command:
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _back Regenerating model.
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _back Regenerating model.
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.
Command:
Command:
Command: _vscurrent
Enter an option [2dwireframe/3dwireframe/3dHidden/Realistic/Conceptual/Other]
<2dwireframe>: _R
Command: '_zoom
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: 2x
Command: SUBTRACT
Select solids, surfaces, and regions to subtract from ..
Select objects:
Command:
Command:
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]: *Cancel*
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]: 0,0
Specify radius of circle or [Diameter] <37.50>: 5
Command: Z
ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>:
Specify opposite corner: E
Command: Z
ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: E
Command: 0,0
Unknown command "0,0". Press F1 for help.
Command: *Cancel*
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]: 0,0
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]: 0,0
Command: '_zoom
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: 2x
Command: Specify opposite corner:
Command: EXTRUDE
Command: SUBTRSCT
Unknown command "SUBTRSCT". Press F1 for help.
Command: *Cancel*
Command: SUBTRACT
Select solids, surfaces, and regions to subtract from ..
Select objects:
Command: SUBTRACT
Select solids, surfaces, and regions to subtract from ..
Select objects:
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Checking 903 intersections...
Specify next point or [Undo]: *Cancel*
Command:
Command: _.erase 1 found
Command:
Command: ARRAY
1 found
Command: _u ARRAY
Command: _u ERASE
Command: _u Circle GROUP
Command: _u Line GROUP
Command:
Command:
Command: _.mredo Enter number of actions or [All/Last]: 1 GROUP Line
Command:
Command:
Command: _sphere
Specify center point or [3P/2P/Ttr]:
Specify radius or [Diameter]: 2.5
Command:
Command: ARRAY
1 found
Pick or press Esc to return to dialog or <Right-click to accept array>:
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <10.00>: D
Specify diameter of circle <20.00>: 23
Command:
Command:
Command: _SAVEAS