Professional Documents
Culture Documents
B4X-LS4
Light switch for Building Automation applications
Developed to fit into wall socket and frames from Fuga, NIKO and Bticino
4 individually programmable pushbutton inputs
4 individually programmable LEDs for true response
Supplied by smart-house bus, no external supply required
Channel coding by BGP-COD-BAT
Activated inputs are indicated by a blue LED
Non-activated inputs are indicated by an orange LED
Orange LED can be de-activated by an internal dipswitch
Delivered with both white and charcoal grey push button covers
INPUT/OUTPUT SPECIFICATIONS
Pulse prolongations
In/out 1 - 4
In/out 5 - 8
SUPPLY SPECIFICATIONS
Power supply
0.7 mA
1.0 mA
1.0 mA
GENERAL SPECIFICATIONS
Channel coding
Enclosure
Environment
Degree of protection
Pollution degree
Operating temperature
Storage temperature
IP 20
3 (IEC 60664)
0 - 50 C/32 - 122F
-20 - 70C/-4 - 158F
20 - 80%
Weight
50 g
Dimensions
44 x 44 x 21mm
Aurora 44 x 44 Mechanics
Terminal D+.
Terminal D-
PUSHBOTTON/DIMENSIONS (mm)
44
21
UP
I3 / O7
smarthouse
connector
44
I1 / O5
I2 / O6
Programming
connector for
BGP-COD-BAT
I4 / O8
TYPE SELECTION
Supply
by smart-house
Colour
White
Ordering no.
B4X-LS4
No frame included
Delivered with both white and charcoal
grey push button covers
Signal
GND
MODE OF OPERATION
The B4X-LS4 is a light switch with 4 buttons and 4 LED outputs. It is
developed to be mounted into a 44 x 44 wall socket from Fuga,
NIKO and Bticino. The light-switch has two colors of LEDs to indicate non-activated channel (orange LED) and activated channel
(Blue LED). By means of an internal dipswitch on the light switch the
orange LED can be de-activated.
The light switch is part of the smart-house concept for building
automation applications and can be used to control lights, roller
blinds and all other functions supported by the smart-house controller.
ACCESSORIES
Programming cable to BGP-COD-BAT
GAP-TPH-CAB
White
40417
Charcoal Grey 40430-1
Specifications are subject to change without notice (27.10.2009) - A product of the CARLO GAVAZZI Group
B4X-LS4
MOUNTING OF FUGA
NOTE: When using the Fuga type, use the standard screws
for Fuga to attach the unit into the wall box.
1
2
Specifications are subject to change without notice (27.10.2009) - A product of the CARLO GAVAZZI Group