Professional Documents
Culture Documents
Eta Correlation is used to determine if a relationship exists between an interval variable and a
categorical variable. To run an Eta Correlation, an Analysis of Variance is first run to determine
if there is a significant difference between the groups averages. With significance determined
through the F-ratio, an Eta correlation can be calculated to determine the percentage of variation
in the dependent variable that can be explained through the independent variable.
In this example, first the safety manager wanted to determine if there is a significant difference in
the mean audit scores each month for three plants he manages over a seven-month period.
For example if there were 3 hazards corrected during a month and 5 accidents reported, the plant
would get a score of -2.00, 10 corrected and 4 accidents then a score of 6.00 and so on; thus
creating an interval scale.
First, an ANOVA procedure was performed yielding the following results table:
Sum of
Variation
Squares
Between
34.67
Within
Total
df
2
60.57
95.24
Mean Squares
17.33
18
5.15*
3.4
20
*The F-ratio was determined to be significant at the .05 level since the
critical F Score is 3.55 from the F Tables.
The Eta Coefficient can be calculated using the information from the ANOVA as follows:
Eta 2 =
34.67 (2)(3.4)
.28
95.24 + 3.4
The result from the Eta procedure is interpreted in the same manner as the squared correlation
coefficient with .28 which indicates that 28% of the variability in the dependent variable can be
attributed to the independent variable.