Professional Documents
Culture Documents
Energy is usually defined as the ability to do work. This is an anthropocentric and utilitarian perspective of energy; however,
it is a useful definition for engineering where the aim of machines is to convert energy to work. As a more general
description, we would say that energy is a fundamental entity whose availability and flow are required for all phenomena,
natural or artificial.
An understanding of how energy is generated and measured is central to our decisions concerning the use and conservation
of energy. Large-scale production of energy evolved over centuries but grew radically in the last 400 years and especially
since the Industrial Revolution. A century of development and commercialization of electric power technology has ensured
an easy supply, and continuous measurement.
Energy is derived in usable forms from numerous sources, such as flowing water, fossil fuels (e.g., coal and natural gas),
uranium, and the sun. Electricity is a widely used form of energy. Any of these sources can be used to generate electricity.
Liquid fuels such as gasoline and diesel derived from fossil fuels are a widely used source of energy. These fuels form the
basis of our easy transportation. A complete understanding of the complexities of the energy systems within the natural
environment requires knowledge of some basic physics and chemistry. This is discussed later in this unit in the sections
under "Science Notes."
Energy Systems
An energy system may be thought of as an interrelated network of energy sources and stores of energy, connected by
transmission and distribution of that energy to where it is needed. The transformation from stores of energy in food to
work, and subsequent dissipation of energy is an example of such a system. The starting point of all energy in this "food
chain" or "energy chain" (considering only the vegetable and cereal part of our food) is the sun.
In Figure 1, each of the arrows shows transformation or transmission of energy -- that is, the energy changes form or is
moved from one place to another. Plants and humans are the agents shown that store and/or transform the energy.
This natural energy system is part of a larger system that includes nutrients from the soil as input, other energy for cooking
as input, etc. Figure 1 is drawn to show the parts of transformation of this initial solar energy up to its final dissipation and
one storage system (fossil fuels). A complete concept map would show all the other factors. The numerous energy systems
in nature include the food chain, the climate and ocean systems, and the cycles of various materials such as water, carbon,
and nitrogen.
Most of the energy systems currently in use, both natural and man-made, originate in the Earth-Sun relationship. The fossil
fuels we use today are stores of solar energy. Photosynthesis is an example of solar radiant energy transformed into stores
of chemical energy that plants and animals (including humans) use to maintain themselves. The conversion of solar radiant
Energy System
energy through photosynthesis is a fundamental natural energy system. The food chain is an example of a natural, solarbased energy system that has sustained human life on Earth. Often we take for granted that energy will always be available
for us to use. We fail to recognize the complexities of the energy systems that drive these environmental phenomena and
sustain life on Earth. We are intricate parts of the system as end users, completing the dissipation of energy to forms that
are so spread out that it is impossible to use that energy again.
Fossil fuels (coal, oil, gas) result from a transformation of plant and animal material over millions of years. The solar energy
originally stored in the plant or animal is eventually converted into energy stored in carbon and hydrogen bonds of the fossil
fuel. The fuels that took millions of years to make are being used at an enormously rapid rate. Figure 2 is a representation
of the use of fossil fuels over time, including an estimation of how long they might last.
Fossil fuels and fuels like uranium are "spent" once they are used to obtain energy. These are called non-renewable sources
of energy. Although new plants can be planted that eventually turn to coal, the process takes millions of years and that is
why coal and other fossil fuels are considered non-renewable. Solar and wind energy arrive or circulate air on the Earth
everyday. These sources are called renewable.
Wood and trees used as fuel are called renewable, because they can be replanted. However, when we use them so that the
rate of use far exceeds the rate of replenishment (trees take time to grow), referring to these sources as "renewable" can be
a misnomer!
Energy use in each human activity has grown exponentially since the early days of human civilization. For example,
technological capabilities enable us to travel more and process more food. Figure 3 shows the amount of energy (in calories)
we spend for each calorie of food we get. It shows that technologies have mechanized and made large production systems
of cultivation and fishing. These systems involve large expenditures of energy, as seen in Figure 3. The figure shows that
for wet rice production in Asian countries, it takes between 0.02 and 0.1 calories of energy to produce 1 calorie worth of rice
as food. Large-scale food production consumes enormous amounts of energy. For example, it takes over 2 calories of
energy input to produce 1 calorie worth of eggs in large-scale farms, and it takes 10-15 calories of input for every calorie
worth of beef produced in the U.S.. Note how the intensity of energy consumption for U.S. food production has grown
almost ten-fold in the 20th century! Add to this the fact that for every calorie of energy our body gets, we have to take in
over 5 calories worth of food!
Energy System
Figure 3: Summary of the energy required for various types of food production.
Source: Clark, Mary E. Ariadne's Thread. St. Martin's Press, New York, 1989.
Reprinted with permission of Macmillan Ltd..
Table 1 shows that as we become more industrialized, each human consumes more calories daily as well. This, along with
population increase, has resulted in an enormous increase in the daily calories consumed by humans.
Economic systems
Years Ago
Maximum global
population*
(approx.)
Daily
calories/
person
Hunter-gathering
(before cooking)
1,000,000 to
500,000
1 million
3000
3 x 109
Hunter-gathering
(after cooking)
500,000 to
10,000
10 million
8000
8 x 1010
Early agriculture
10,000 to 2000
300 million
15,000
4.5 x 1012
Middle Ages
1000
500 million
Europe 10%
Rest 90%
Today
North America
Eur, USSR, Japan
Third World
~ 8 x 1012
23,000
15,000
2.8 x 1014
5000 million
5%
18%
77%
314,000
157,000
15,000+
Notes:
*R. Leakey and R. Lewin, Origins (New York: E.P. Dutton, 1977) p. 143; J. Weeks, Population: An
Introduction to Concepts and Issues, 2nd edn(Belmont, CA: Wadsworth, 1981) p. 46
Harrison Brown, The Human Future Revisited (New York: W.W. Norton, 1978) pp. 30-3, with per capita
figures for industrialized nations upgraded from 1970 to 1980 levels.
Table 1: Per capita and global energy consumption for different types of human economies.
Source: Clark, Mary E. Ariadne's Thread. St. Martin's Press, New York, 1989. p. 102.
Reprinted with permission of Macmillan Ltd..
Energy System
Smil, Vaclav. Energies: An Illustrated Guide to the Biosphere and Civilization. The MIT Press: Cambridge, MA, 1999.
Nye, David E. Consuming Power: A Social History of American Energies. The MIT Press: Cambridge, MA, 1999.
Energy System
2
The study and invention of the heat engine and steam power established and confirmed the Laws of Thermodynamics. From
1840-1880, Joule, Lord Kelvin, and James Clark Maxwell in England; Sadi Carnot and Rudolf Clausius in France; and Ludwig
Boltzmann in Austria formulated a theory of heat engines, laying the foundations of Thermodynamics, literally the science of
"motion from heat." (Thermo=heat and dynamics=motion).
In 1820, the advances in mechanical and materials engineering made the railroad the most efficient and fastest means of
transportation. Coal and wood were used as the primary fuel source for the steam engine. The locomotive also changed
society's perception of travel and transportation.
Wind energy was developed on a large scale in the United States as an energy source for farms and railroad stations, using
tall windmills to pump water from underground wells. There were specific design developments that made these windmills
more efficient, although they still generated relatively little power. The height of these windmills helped to ensure they
caught the wind and a tailfin generally kept the fan facing the wind.
Another result of the Industrial Revolution was an energy distribution infrastructure built into cities that promoted domestic
convenience. As early as 1816, natural gas was piped into cities for domestic uses such as cooking, home illumination, and
street lighting. The steam engine was used to pump water into homes and sewage away from homes. The city was
undergirded with networks that usually began with water pipes and gas lines and gradually expanded to include sewers,
electrical conduits, and telephone lines.3
In 1859, when petroleum was drilled in Titusville, Pennsylvania, an apparently plentiful energy source began to replace coal.
Oil was distilled into kerosene (referred to as coal oil) and used as a lamp oil. It replaced dwindling supplies of whale oil used
for lamps. There were many reasons oil became a more desirable fuel source than coal: it was easy to obtain and transport;
it emitted less particulate pollution than coal; it replaced scarce whale oil as a fuel for lamps; and coal had become an
unreliable fuel source because of the labor issues surrounding the mining of coal. Miners were striking for safer work
environments and more money, which affected the amount of coal available to the consumer.
But the most significant use of crude oil was as the liquid fuel for the internal combustion engine, designed in 1861 by
Nikolaus August Otto. The internal combustion engine became one of the most influential inventions of the Industrial
Revolution. Although this engine is low in efficiency, it could produce enough work to move a large metal vehicle far
distances. The fuel of the internal combustion engine was also easier to use than, for example, shoveling coal into a furnace
to power a locomotive. This was the beginning of the use of liquid fuel to advance transportation.
In 1879, Thomas Edison invented the incandescent light bulb -- a major step in the human use of storable energy leading
eventually to large-scale electrification. Electricity is similar to a liquid fuel in that it can be transported easily (although not
efficiently) from one place to another. One of Edison's goals was to make electricity affordable for all homes. Edison began
with the distribution of electricity through a direct current (DC). This meant that electrons would flow one way through a
wire to bring electricity to a home; however, a good portion of the energy was lost as the electrons moved through the wire.
This loss of energy using direct current to move electricity meant that power plants had to be built close to the homes the
plant serviced and was eventually considered impractical.
Nikola Tesla, an inventor employed by Edison, discovered that electrons would alternate or travel back and forth on a wire
and travel longer distances with less energy loss. This was called alternating current (AC) and had an advantage because AC
could be more easily generated. Edison had so much money invested in his DC power plants that he discredited Tesla's
alternate current as dangerous -- thus beginning a "war of the currents." Tesla eventually joined forces with George
Westinghouse and began developing power plants using alternating current (AC).
In the late 19th and early 20th centuries the steam turbine, using coal as a fuel, was developed as a cheap power source
that generated electricity. In 1882, the first functional steam turbine was designed by Charles Parsons, an English engineer.
He used the high pressure of steam to hit the blades of a rotor. The principle of the turbine was a major step toward today's
production of electricity.
In 1893, Westinghouse demonstrated a "universal system" of generation and distribution at a Chicago exposition. The
universal system meant that power or energy could be used in a variety of ways at many different voltages. Westinghouse,
using Tesla's invention of the transformer and the electric motor, as well as steam turbines, transformed Niagara Falls into
one of the first hydroelectric plants in the world
In 1910, Henry Ford opened the 60-acre Highland Park automotive plant with a moving assembly line. This was the
beginning of an eventually enormous use for fossil fuels. Fossil fuels were used not only to propel the automobiles that were
made at the plant, but also to generate electric power for the automotive plant.
Energy technologies developed rapidly during the 20th century. Although the current version for solar thermal collectors was
designed in 1908, they were not developed well enough for mass distribution. In the 1920's, 30's, and 40's, there was
large-scale construction and development of hydroelectric plants/dams to support increasing population in the Southwest.
3
Nye, David E. Consuming Power: A Social History of American Energies. The MIT Press, 1999. (p. 94)
Energy System
In 1938, Otto Hahn and Fritz Strassman demonstrated nuclear fission and within four years (1942), Oak Ridge, Tennessee,
was chosen as the site for the first functional nuclear reactor plant, and for the preparation of uranium and plutonium used
to the create the atomic bomb at Los Alamos. The first nuclear chain reactor was demonstrated at the University of Chicago
in December 1942. In July 1945, the testing of the first atomic bomb at Alamogordo, New Mexico, demonstrated the
technology used to release nuclear energy on a large scale. In 1957, the first commercial nuclear power plant opened in
Shippingport, Pennsylvania.
The first large scale use of photovoltaic (PV) solar energy in conjunction with satellite technology developed in the 1950's.
The United States Vanguard I was the first PV-powered satellite.
By the early part of the 20th century, crude oil and its products had become an indispensable part of the industrial economy.
James Young had patented a process in England in 1850 to distill oil from coal and shale. Oil refining is not just about
gasoline. The distilled chemicals from crude oil have many purposes -- for example, petroleum is used for plastics
manufacturing. Young's process of fractal distillation forms the basis of the world's oil refining industry.
Figure 4 shows the oil reserves that we know for sure as of 1987.
While a large amount of oil occurs in many parts of the world, the largest stores are located in the regions governed by the
Arab countries. The Oil and Petroleum Economic Cartel (OPEC) is the economic coalition of these countries that control the
flow of that oil. In the 1970's, OPEC placed an embargo on their oil sales. This "energy crisis" brought energy scarcity to the
consciousness of all nations -- and especially the U.S., with its higher dependence on imported oil. This crisis began to
generate interest in the exploration of renewable energy sources for large-scale generation of electricity and other energy
needs.
Energy System
Our energy consumption has led us to develop new energy sources and technologies. In a century, liquid fuels and electricity
have improved our standard of living and provided us with more mobility than people in any other era. This section reviews
our human energy needs, how we currently meet them, and what the future may have to offer.
Energy is essential for all we do as individuals and as societies. Energy production, use, and distribution also cause some of
the most pressing environmental problems. Figure 6 shows the overall picture of human energy needs, the ways in which we
meet our energy needs, and the impacts.
Although industrialized countries use the most energy at present, newly industrialized countries are increasing their rate of
use. Figure 7 graphs the projected energy needs of industrialized countries, developing countries, and Eastern Europe and
the former Soviet Union. Many environmental and economic issues arise from the escalating energy use all over the world.
Understanding the science and technology driving the energy system enables us to better understand our relationship to the
environment.
Energy System
Projections
1990
1999
2005
2010
2015
2020
6,385
7,517
8,580
9,352
10,112
10,888
1.8
2,817
1,906
3,236
1,452
3,761
1,622
4,147
1,760
4,484
1,972
4,804
2,138
1.9
1.9
2,258
3,863
4,988
6,191
7,615
9,203
4.2
1,259
551
257
93
2,319
1,084
424
233
3,088
1,533
545
294
3,883
2,035
656
333
4,815
2,635
798
386
5,856
3,331
949
437
4.5
5.5
3.9
3.0
357
578
716
858
996
1,139
3.3
449
684
844
1,035
1,268
1,552
4.0
10,549
12,833
15,190
17,303
19,699
22,230
2.7
The factors that affect energy use most are the level of industrialization, the climate of the region, and the population. These
factors are not independent of each other. All of these factors influence energy choices, production, distribution, and usage.
The average use of energy per person in different countries varies widely. Table 3 highlights world energy consumption for
electricity generation by region and fuel source. It is evident in these tables that industrialized countries use more energy.
Energy System
Region and
Fuel
Industrialized
Oil
Natural Gas
Coal
Nuclear
Renewables
EE/FSU
Oil
Natural Gas
Coal
Nuclear
Renewables
Developing
Oil
Natural Gas
1995
77.1
5.7
9.7
27.7
19.4
14.7
26.4
2.8
10.6
7.4
2.5
3.1
38.1
5.1
4.8
History
1999
83.8
6.5
11.6
29.5
20.6
15.6
23.8
2.4
10.3
5.4
2.7
3.0
40.9
5.7
6.0
2005
91.6
5.4
15.6
32.1
20.9
17.5
25.9
3.1
11.1
5.4
3.2
3.2
52.3
6.9
8.4
Projections
2010
2015
97.2
103.5
5.3
5.5
18.3
23.1
33.4
34.0
20.9
20.5
19.4
20.4
27.0
28.9
3.5
4.2
12.3
14.4
4.5
3.3
3.1
3.1
3.5
4.0
63.1
75.0
8.3
10.0
11.0
13.6
2020
108.0
5.9
27.4
34.3
19.1
21.3
30.8
4.7
15.9
2.8
2.8
4.5
86.6
12.0
16.4
Coal
Nuclear
Renewables
Total World
Oil
Natural Gas
Coal
Nuclear
Renewables
16.8
1.4
10.1
141.7
13.6
25.1
51.9
23.3
27.9
15.8
1.9
11.5
148.4
14.6
27.9
50.7
25.3
30.0
20.4
2.6
14.1
169.8
15.4
35.2
57.8
26.7
34.8
24.7
3.4
15.8
187.3
17.0
41.7
62.5
27.4
38.7
32.6
5.1
20.5
225.4
22.5
59.7
69.7
27.1
46.4
29.2
4.1
18.2
207.4
19.7
51.0
66.5
27.7
42.5
Information describing our energy use often can be evasive. Figure 8 shows the main heating fuels the U.S. uses for
residential home heating. Electricity use for heating is on the rise; however, electricity is not a direct fuel source like the
others in this figure. It is a form of energy. Different sources, such as coal and uranium, are used to generate electricity.
Therefore, if electricity use is on the rise, the use of coal and uranium are also on the rise.
We are all affected by and pay for the life cycle of electricity. As end users of electricity, understanding the process of
electricity generation gives a clearer picture of what you are paying for and helps in your decision making as a consumer.
Transportation as an Energy Sector
Liquid fuels such as gasoline have made our lives more mobile. Desire to maintain our current ability to travel and the fact
that crude oil is a non-renewable energy source, have encouraged the development of new technologies are being
developed. Meanwhile, our current travel habits are fast depleting the crude oil stores on Earth.
Energy use for transportation is the least efficient use of fossil fuels. The automobile loses far more energy than it uses. As
shown later (in the Energy Transformation section), for every 20 gallons put into a car we only get about 2 gallons worth of
Energy System
actual work. The rest is dissipated as heat. The other inherent inefficiency is in the fact that to move one person, we have to
spend energy moving over a ton of extra material (the automobile itself).
Use of crude oil is escalating as developing countries emulate industrialized mobility. Figure 10 shows the use of crude oil for
transportation needs. This increase in oil consumption specifically for transportation not only impacts the environment, it
also further depletes the limited oil reserves in the Earth's core. Increased consumption of oil for transportation could also
affect a variety of industries (i.e. plastics), which in turn affects the economy.
A review of the science supporting our current energy systems can be found in the section "Science Notes."
10
Conservation of energy was an idea proposed by numerous people. Julius Robert Mayer, a German physician, proposed in
1844 that energy was conserved by observing physical processes involving heat and respiration, but with no quantitative
measurements. The first formal statement was in a paper by a young physicist, Hermann von Helmholtz, in 1847.
(Helmholtz is known as one of the greatest physicists of the 19th century). Joule's experiments from 1843 and his paper in
1849 publicizing his most precise experiments stimulated gradual acceptance of the principle. However, it met with a lot of
skepticism early on because it seemed speculative. Even as late as 1858, William Barton Rogers, the founder of
Massachusetts Institute of Technology (MIT), wrote to his friend that the principle of conservation of energy was
"mysticism"! This is an example of both the slow pace of science and of the fact that great discoveries are often a leap of
speculation, although based on observations.
The First Law of Thermodynamics states that energy cannot be created or destroyed. Simply stated: energy can change
forms; mass and energy may even change into each other (this happens only in special reactions within nuclei of atoms) but
the total energy in the universe remains constant.
The first law says that you can convert energy into work, and into the simultaneous production of heat. If the total energy is
E to start with, and all of it is spent doing an amount of work (W), with a production of heat (Q), the First Law states:
E=W+Q
More correctly, we are talking of the change of energy, work, and heat in a system. Using the symbol "" to denote the
changes, the first law is written as:
Q
non useful
work
heat and noise
Q1
work done
mechanical energy
+
E1
W1
=
=
transformation from
chemical energy to mechanical energy
Q2 + E2
E2
Energy System
work done
energy spent
OR
work output
energy input
11
EXAMPLES OF EFFICIENCY:
How efficient is an automobile? In other words, how much of the energy in the
gasoline results in kinetic energy or energy of motion of the automobile?
12% if well maintained, 8-10% if not maintained
What are the implications of this inefficiency? Of the 20 gallons you of gasoline you
put in your car, how much actually moves the car to your destination?
1.6-2.4 gallons
the rest is transformed to waste heat and noise
How efficient is a coal-fired power plant?
transformation by steam turbine:
30-40%
How efficient is a hydroelectric plant?
transformation by water driven turbine:
80%
(the difference from above is because no conversion to steam is involved)
How efficient is a nuclear power plant?
the nuclear reaction is 90% efficient, however the same combustion process
(steam turbines) is used to generate electricity as with the coal-fired plant so
the net efficiency: 30-40%.
How efficient is the human body?
conversion of the energy in the food to muscular and other kinds of work
20%
efficient
Based on the First Law of Thermodynamics, we neither create nor destroy energy. Whenever we say that we are producing
energy, what we really mean is that we are transforming energy from one form to another that is more usable. Energy that
is the result of work usually manifests as change in position or as the motion of an object. Energy that is stored is called
potential energy -- energy that has the 'potential' to do work. A second form of energy -- energy of motion -- is called
kinetic (meaning "moving") energy. Both kinetic and potential energy can be transformed into work.
Later in this unit we present the physical basis of energy and work. Without going into the details that will come then, let us
discuss two transformations of energy: a waterfall and a pendulum. Every gallon of water in the fall has potential energy at
the top of the waterfall by virtue of its position. At the bottom of the waterfall, this gallon of water travels faster and has
gained kinetic energy at the expense of potential energy. As a pendulum swings back and forth, the energy changes from
potential energy at the top position to kinetic energy at the lowest position and potential energy again as it goes to the top.
We will explain the deeper meanings of potential and kinetic energy later in the unit.
We begin by reviewing some fundamentals of physics and chemistry relevant to understanding the basic principles of energy
transformation. In particular, we focus on concepts related to the fundamental aspects of energy: Matter, Force, and Energy
and the Fundamental Forces of Nature. Then we describe the physics and chemistry of Measuring Energy, Work, and Power.
Chemical reactions and energy release are then described to understand more clearly how the chemical combustion of fossil
fuels produces the carbon dioxide and other products that cause environmental problems.
Energy System
12
Physical Quantity
mass m
distance d
time t
speed, velocity, v
acceleration, a
force F
Work, energy W, E
Definition, Unit
quantity of matter, kilogram
linear dimension of space, meter
dimension of time, second
distance per time, m/sec
2
velocity change per time, m/sec
2
mass times acceleration, kg. m/sec
= Newton, nt
force times distance, nt.m = Joule, J
Matter is discussed in terms of the quantity of matter. This is called the mass. The unit we will use to measure mass is
the kilogram (gram, milligram) in the MKS system that is globally adopted as the scientific system of units. For most
engineering applications, and for common trade in the United States, the British system is used, in which the unit of mass is
the pound.
Force is a more complicated concept. We experience or observe force through its action on matter (as a push or pull).
When a force acts on matter, it changes the way that quantity of matter is moving (Newton's first law). So we measure
force by its capacity to produce acceleration in a mass. Acceleration is a measure of change of motion, measured by how
much speed (m/sec) changes in a second. So the units for acceleration are meter per second per second, or, m/sec2.
(Newton's second law: F = ma). Thus the unit to measure force is a composite of the measure of mass, and of
2
acceleration. The unit is called a newton (kg.m/sec ), written as NT or N. So a one-newton force can change the
2
acceleration of a 1 kg mass by 1m/ sec .
When a force (F) is applied to an object and moved through a distance (d, measured in meters, m) in the direction of the
force, we define the work (W) done as: Work = Force * Distance moved in the direction of the force, or symbolically,
W= F d
(Joules, J = NT m)
When F is measured in newtons (NT, or N) and distance in meters, the resulting quantity of work is expressed in Joules. So,
a force capable of producing an acceleration of 2.3 m/sec2 by acting on a mass of 3 kilograms is a 6.9 NT force. The weight
of an object of mass m on Earth is the force due to Earths gravitational pull on that object. The gravitational acceleration of
the Earth is about 9.8 m/sec2. (This means that the gravitational force exerted by the Earth on a 1 kg object is 9.8 nt.).
2
Thus the weight of a 5-kilogram object on Earth is 5 kg * 9.8 m/sec , or 49.0 nt.
A 2.5 NT force moving something through a distance of 4 m (meters) in its direction does a work of 2.5 nt * 4 m, or 10
Joules. When a 5 kg object falls a distance of 4 m, the work is done by the Earths gravitational force. As the gravitational
force on 5kg is 49 NT, the work done by the Earth on the 5 kg object in pulling it down by 4 m is 49 nt *
5 kg = 245 nt-m
= 245 Joules.
Measuring Energy: Work, Energy, Heat, and Power
All phenomena involve transformations of energy between potential and kinetic forms. We discuss some transformations
and calculations involving energy in the next section. Before we do that, we need to understand some definitions of
different means of measuring energy.
Due to historical reasons, different measures of energy were developed and used in physics and chemistry. In the early
times, physics dealt mainly with motion -- of bodies such as planets and stars, as well as smaller masses. Thus forces and
motion were the focal points of early physics4. Physics measured energy by means of the force required to change the state
of motion. The units of physics dominated the emerging fields of engines as well, where forces were used to produce
motion. How much energy could be produced every second was the question in designing engines. The amount of energy
per unit of time is defined as power. Thus power has the units of Joules (energy) per second, also known as a watt. One
watt is one Joule per second. We also have the Horsepower, which is the unit in the British system. It is understandable
that with the horse as one of the important animal engines, the early engines were compared to the power of a horse to
move things.
Chemistry started as the study of changes in the nature of substances5. Heat was a common method used to change
substances. Temperature, or the feel of heat, was used to measure the amount of heat in a substance. Thus heat energy
was measured by chemists in terms of the energy required to change the temperature of a common substance - water. Thus
4
Physics derives its name from the Greek word "Physis," meaning the nature of things; and the field was given its name by Aristotle.
Chemistry derives its name from "Cheo," which means "to pour."
Energy System
5
13
the unit of energy (heat) most used by chemists was the calorie, defined as the amount of heat required to change the
temperature of one gram of water by one degree Celsius. Of course, there are also two different measures of temperature
depending on whether you follow the British or the Metric system. We will confine ourselves to the Metric system, and
hence to degrees celsius (or centigrade). Count Rumford (Benjamin Thompson) and James Joule, scientists in the
eighteenth century, were among the earliest to show that mechanical energy and heat could be changed into each other,
primarily by noting that when mechanical work is done, the friction produces heat.
Joule in fact determined that 4.18 Joules of mechanical work is equivalent to 1 calorie of heat6. In practice, a calorie is a
very small amount of heat, and so a kilocalorie, also written as Calorie (or kcal) is used. A kilocalorie is therefore 4,180
Joules. The units of energy, heat, and power are summarized in Table 5. Because of the different origins of the ways of
measuring energy, and the numerous manifestations of energy, there are several units for measuring energy. Units also
vary depending on the practices in different fields, and on the type of energy being measured. This can be confusing at
times. The tables below summarize most of the units and contexts.
Physical Quantity
and Definition
Energy, work (mechanical) = force x distance
Energy (chemical, heat) = energy to change
temperature
Power = work/energy per unit time
Energy = power * time
Metric system
nt.m = J
calorie (cal)
J/sec = Watt
1000 Watts = 1 KW
kilowatt x hour =
(kwh) kilowatt hour
Units
British system
ft-lbs
British thermal unit (BTU)
1BTU = 778 ft-lbs
horse-power (HP)
1 HP = 550 ft.lbs/sec
1 HP = 746 watts
no equivalent
Work and energy transform into one another. They are measured in the same units. So a "Joule" is also a unit for measuring
energy. As described in more detail later, all energy is either stored (potential energy) or is in the process of causing motion
of an object (kinetic energy). Thus we can represent the energy work relationship in a continuous state of mutual
transformation in a system, including the energy that is "lost" (has become unavailable)
Potential
Energy
Work
Kinetic
Energy
Unavailable
Energy
Depending on the context, the different units above are used in physics or mechanical engineering:
For physics, mechanics, and engines, the work is typically stated in terms of moving something in a unit of time, e.g.,
energy per second, with power (watts) in terms of joules per second. For chemistry, the work is changing the nature of
substances, therefore the units are in terms of the amount of heat needed to change the temperature of water (calorie).
Name of Unit
kilocalorie
Symbol
kcal or
Cal
Value in calories
1000
Value in Joules
4184
calorie
British Thermal Unit
cal
BTU
1
252
4.184
1054
Joule
.24
Kilowatt-hour
kwh
8.6 105
3.6 106
Quad
Measures
Scientific work unit for
nutritional requirements and
heat
Scientific work
Engineering Technology,
heating, a/c
Standard unit especially for
mechanical energy
Standard Unit for Electrical
Engineering
Used for large quantities of
Energy
There is an anecdote that Joule did this experiment for the first time by noting the temperature difference between the bottom and top of
a beautiful waterfall in Switzerland while he was on his honeymoon there!
Energy System
14
Exercises
1. Look at the following appliances to get an idea of the power they generate: a hair dryer,
a toaster, a clothes dryer, a light bulb. For frame of reference, we receive about 1,400
watts of solar energy for every square meter of the Earth.
2. Each kilogram of water at Niagara Falls falls through a height of 184 ft. (or
approximately 56 m). What is the amount of work done by the force of gravity on the 1
kg of water? What happens to this work?
3. You use a force of 19.6 nt to raise a rock (of mass 2 kg) vertically through a distance of
3 m from the ground.
Why vertically?
What force are you working against?
What is providing the energy for that work? How?
How many Joules of work is done?
Now, assume the rock is kept at the level of 3 m above ground. How many Joules of
(stored) potential energy does it have? Potential energy will be released if the rock is
allowed to fall. For example, suppose the rock falls squarely on the top of a nail head
held vertically on a piece of wood, and the nail has to overcome a force of friction of
9.8 nt to be driven into the wood.
How far can the rock theoretically drive the nail in?
What assumptions have you made in answering this?
4. A block is pushed 1 meter along a horizontal surface by a horizontal force of 60 nt. The
opposing force of friction is 10 nt.
Energy System
15
Example: We wish to determine how much coal is needed to produce 1 kWh of electricity.
Assume the power plant is 33% efficient, with 85% of waste heat to cooling tower, and 15%
to stack. Assume you can get 24 kJ of energy from 1 gram of coal. Note that 1 kW of
electricity is equivalent to 1 KJ/s of electricity. What are the environmental issues?
RELEVANT PROPERTY
Mass
Electromagnetic
Electric charge
Strong Nuclear
Isotopic spin*
Weak Nuclear
Spin*
EXAMPLES
Weight of object near a planet; force that keeps
planets in their orbits around the sun
Force that keeps an electron in its orbit around
the atomic nucleus; (i.e., attraction or repulsion
between a charged plastic comb and a strand
of hair)
Force that keeps protons and neutrons together
in a nucleus
Force responsible for certain types of nuclear
reactions
Table 7: The four fundamental forces (or, interactions) and the properties on which they act.
*Spin and isotopic spin are properties of elementary particles that we will not define here.
Energy System
16
Potential energy, therefore, is the energy associated with different positions in the force field. The water at the top of a
waterfall has higher gravitational potential energy than at the bottom because of the different positions in the gravitational
field. Consider two points (A and B) in the Earth's gravitational field (g) where B is h meters higher than A. Then a mass (m)
has a potential energy mgh higher than its potential energy at A. At a point 2h above A, the mass has a potential energy of
2 mgh. So height is a measure of the potential energy.
Thus, an analogy with water and gravitational potential energy gives us a way to represent energy levels showing the
potential energy state of a system in terms of horizontal lines. Thus we could say that the 100m point above the lowest level
in a waterfall has 980 Joules gravitational potential energy per kg of water above the lowest point.
m*g*h=E
(Energy)
17
These formulas also demonstrate that potential energy is a representation of the position of a system in a field of force. The
1 kg of water in our example has higher potential energy when it is further away from the center of force (center of the
Earth). At point A, the water is more "bound" (to the Earth) than at point C. We will use this idea later to draw the
analogous levels to represent chemical potential energy.
more stable
lower potential energy
more bound
As more stable states have lower potential energy, we can get energy for use by moving a system to a lower potential
energy. This is the basis for all energy transformation technologies.
Chemical Stability
Chemicals and their reactions are the medium through which nature stores and transforms energy. This energy is partly
derived from the suns pure electromagnetic energy that reaches the Earth as solar radiation, and partly from the energy
stored in chemicals as potential energy in the chemical bonds. Recall the food chain diagram from the Introduction.
Photosynthesis is an example of how nature stores and transforms energy via chemical bonds. Chemical bonds are
essentially the phenomenon that atoms of elements stay close to each other, forming a compound, because that puts
them in a lower (more stable) state of total energy.
These lower energy configurations of elements happen when the elements get an electronic configuration similar to the
nearest inert gas. Electronic configurations of inert (noble) gases are the most stable in a given period (horizontal segment)
of the Periodic Table. In fact, that is why these specific elements do not "need" to react with anything and are, therefore,
chemically inert (or noble). These elements have no "need" to combine because their electron shells are completely filled
with electrons. The noble gases are helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), and radon (Rn). Chemical
activities of the elements are simplest to predict when they are close to the inert gases in the periodic table. Look at the first
few periods of the Periodic Table in Figure 13. The activity can be described as a result of elements "wanting" to complete
their shell. Although this is an anthropomorphic description, it is a helpful analogy.
Energy System
18
Lithium and sodium would tend to "lose" one electron to become more stable (more like the closest inert element). They can
do this, for example, by combining with elements that can gain stability by adding one electron to their shell -- elements
such as F and Cl. These pairs therefore favor ionic bonds, in which the electron is actually transferred.
When similar atoms such as H or O or N come together they can gain stability by sharing electrons in a covalent bond.
Shared electrons spend time with either of the H atoms in H2 for equal amounts of time, for instance. In a case of a covalent
bond such as those in H2O, however, the electrons spend more time on the average in the neighborhood of the oxygen.
The water molecule, which has an angle of 105 between the two H-O bonds, is therefore a polar
molecule, being more negative at the oxygen end of the molecule, because the negatively charged
electrons spend more time near the oxygen atom.
Nitrogen, hydrogen and oxygen atoms go to more stable configurations by forming the diatomic gases,
N2, H2, and O2 respectively rather than remain in the atomic form: N, H, and O. When hydrogen atoms
are produced in any reaction, pairs of these hydrogen atoms form covalent bonds with each other so that
each has the helium (nearest inert gas) configuration at least a fraction of the time. Hydrogen has one
electron and needs a total of two to be like He. So two hydrogen atoms share a pair of electrons, each
belonging to one of the original atoms, thus forming H2. Schematically, it could be written as HxxH (x
representing an electron). This schema is represented by H-H where the single line represents a bond
consisting of two shared electrons.
Again, the same can be said for oxygen and nitrogen. Oxygen has an atomic number of 8, and has four electrons in the
outermost shell. It needs two more to be like Neon (nearest inert gas).
EXERCISE:
Nitrogen has __ electrons in the outer shell, needs __ to be more like _____
Carbon has __ electrons in the outer shell, needs __ to be more like _____
Oxygen has __ electrons in the outer shell, needs __ to be more like _____
Phosphorus has __ electrons in the outer shell, needs __ to be more like _____
Hydrogen has __ electron in the outer shell, needs __ to be more like _____
Following this logic, we can figure out the most frequent bond configurations for carbon, nitrogen, oxygen, phosphorus,
hydrogen, with 4, 3, 2, 3 and 1 bonds respectively, as schematically in Figure 14.
19
Energy transformations using chemical sources consist of changing the mutual configurations of these compounds
accompanied by the release of energy, which we can then use for something. Chemical bonds contain energy that may be
released when the bonds are made.
Representation of Bonds
Each atom has a number of bonds coming out of it equal to the number of electrons it shares in covalent bonds. So the line
of a bond represents two electrons in activity, one from each of the two atoms it bonds. Thus for H2, H-H is really H:H, with
each hydrogen atom contributing one electron to the bond.
Let's look at the example of nitrogen (atomic number = 7). Nitrogen, being 3 electrons short of its nearest inert gas (neon,
atomic no. = 10), tries to bond so as to share 3 of it's electrons with other atoms bonding with it, in order to get a complete
shell of 10 whenever possible. Thus it may share electrons with another N atom (forming N2), or with hydrogen (forming
NH3).
Similarly carbon can bond with four hydrogens to form CH4 (a gas called methane), or with two oxygen atoms to form CO2
as depicted above. Note that we always have four bonds coming out of carbon, one out of hydrogen, and one out of oxygen.
Look at their position in the periodic table to see why this is so. Atoms in the middle of the Periodic Table and their bonding
become more complicated, and we will not need to deal with them here.
Carbon is the basis for all our life forms. It is a very versatile atom because of its capability to form four bonds. Depending
on the amount of hydrogen available to bond, and the temperature and pressure conditions, carbon can form a plethora of
compounds with hydrogen alone. One such family is the hydrocarbons, important in our context because they are the basis
of fossil fuels.
Note how some of these compounds have double and triple bonds between carbons. This happens when carbon and
hydrogen combine under circumstances in which there is not enough hydrogen to satisfy all four bonds of each carbon. For
example, if there is plenty of hydrogen to combine with carbon, we get CH4 or C2H6 (Ethane), with all single bonds. With
less hydrogen we get C2H4 or C2H2 (less hydrogen for the same number of C atoms). C2H4 has a double bond between the
carbons, and C2H2 has a triple bond. Compounds with double and triple bonds are called unsaturated, while single bond
compounds like C2H6 are said to be saturated. Unsaturated compounds are more reactive than saturated compounds
because not all the C atoms are bonded to four other atoms. Hydrocarbons are not the only compounds that can be
unsaturated. Carbon monoxide is a good example of an unsaturated compound, "looking" for another oxygen atom to form
CO2, a more saturated compound. When carbon (in coal or wood, for example) burns in an environment with insufficient
oxygen, it forms CO which is deadly when breathed in. This is the reason to ensure plenty of access to fresh air when we
have a fireplace or running car engine.
Note that many representations are two-dimensional, and that in actuality, the electrons
forming the bonds are distributed in three dimensions. In a compound like CH4, the carbon
is in the middle of a tetrahedron with the 4 H atoms at the vectors.
Energy System
20
Similarly there can also be C3H8 (propane), C4H10 (butane), C5H12 (pentane) and so on. When a formula is written as CH4
just showing the proportion of atoms, it is called an empirical formula. When the bonds are shown as in Figure 15, it is
called a structural formula. A single empirical formula may represent different compounds because the structures may be
different for the same number of atoms combining.
Try drawing propane, butane, and pentane. Note that there are always four bonds coming
from carbon. The linear structures are called aliphatic hydrocarbons. In addition to the linear
hydrocarbon molecules, hydrocarbons may also be formed into ring structures. The ring
structure possesses the property that enables us to smell these compounds! So they are
called aromatic hydrocarbons. The simplest aromatic hydrocarbon is C6H6, benzene. The
structure of benzene was long a puzzle in chemistry, with chemists wondering what the
structural formula for C6H6 could be. They knew the empirical formula was C6H6. It is said
that the great organic chemist Kekul, who had been wondering about this, dreamed one
night of a snake swallowing its tail and was inspired to draw the ring structure! Note the
alternating single and double bonds, a clever way of ensuring four bonds from each carbon
shell.
The versatility of carbon in forming bonds, ring structures and various configurations is the basis of life on our planet. The
chemistry of carbon compounds is therefore called organic chemistry. More complicated carbons compounds are described in
the Ecological System and Materials System. For now let us look at some additional aromatic and aliphatic compounds, and
note some aspects that are relevant to energy storage and release.
Aliphatic hydrocarbons are the basis of fossil fuels. All saturated hydrocarbons react with oxygen at high temperatures to
form carbon dioxide and water, and give off energy. This oxidation reaction is the basis of the internal combustion engine.
Gasoline normally contains hydrocarbons from C6 to C18, a mixture of over 100 compounds! An example reaction of the
combustion of a hydrocarbon is:
C7H16 + 11O2
"Burning" (or a combustion reaction) consists of combining with oxygen at high temperatures. The combustion reaction of
acetylene (C2H2) with oxygen gives off such a large amount of energy that it is used as a welder's torch.
Energy System
21
Energy
(kcal/mole)
104
99
83
146
200
35
119
111
86
177
BOND
H-F
H-Cl
H-Br
H-I
N-N
N N
N-H
CL-CL
Br-Br
I-I
Energy
(kcal/mole)
135
103
87
71
39
225
93
58
46
35
Let us see what the energy values in Table 8 mean. The bond energy of H-H is 104 kcal/mole. This means that when
hydrogen atoms combine to form molecular hydrogen H2, represented by the reaction H + H H2, for every mole (2g) of
H2 formed, 104 kcal of energy are released. Conversely it takes 104 kcal to break apart a mole (6 x 1023) of hydrogen
molecules. From this we can draw a simple chemical energy level diagram for the above reactions, analogous to Figure 12 of
gravitational potential energy.
One mole of an H2 (2g) molecule has 104 kcal total potential energy less than 2 g of H atoms. This is why when H atoms are
formed in a reaction, and these atoms are the only atoms available, they combine to form H2 (roll down the potential energy
"hill" towards a more stable state). In forming the H-H bond, 104 kcal of energy are released for every 2 g (6.02 x 1023
molecules) of hydrogen gas (H2) formed. Similarly oxygen, and nitrogen exist as O2 and N2 rather than in the atomic form
as O and N. So whenever we say hydrogen, oxygen, or nitrogen gas, we mean H2, O2, N2. For H, O, N we specifically say
atomic hydrogen, atomic oxygen, and atomic nitrogen.
2NH3
22
This equation says that one mole of N2 requires three moles of H2 for a complete reaction, and this would then yield two
moles of NH3. Note that we can also say that one molecule of N2 reacts with three molecules of H2 to yield two molecules of
ammonia (NH3). But the table gives energies in units of kcal/mole, which is why it is easier to work with moles. The energy
involved in the reaction involving just one or two molecules of ammonia is too small.
The following table contains the variety of ways in which you can write the reaction that forms ammonia. All the descriptions
below are equivalent. The atomic masses are rounded off values from the Periodic Table.
Nitrogen
Hydrogen
N2
NN
3H2
3 H-H
1 mole of N2
28 g of N
+
+
+
3 moles of H2
6 g of H
Ammonia
2NH3
2NH3
2 moles of ammonia
34 g ammonia
What are the energies of the reactions? In order to get the molecular structure of ammonia, we have to break one N N
bond and 3 H - H bonds. This requires that we supply energy to break the bonds. From Table 8, we get the bond energies:
NN
H-H
N-H
225 kcal/mole
104 kcal/mole
94 kcal/mole
To form each molecule of NH3, we break one bond of N2 and three of H2, and then 3 N - H bonds form to make NH3. To
calculate energy released (or absorbed) in the reaction, we have to calculate the energy needed to break the bonds of N2
and H2, and the energy released when the atoms rearrange to form NH3.
N2
3H2
:
:
225
312
537 kcal
2NH3
:
:
558 kcal - 537 kcal = 21 net kcal released for 2 moles of NH2 formed, so the net energy released is 10.5
kcal/mole of ammonia formed.
More energy is released than absorbed in the formation of ammonia, so this reaction is exothermic. We can also say that
10.5 kcal are released when 17g of ammonia are formed. The energy level diagram here is more complex than that for the
H + H = H2 reaction because of the steps involved.
Figure 18: Energy Level Diagram for the formation of Ammonia (NH3).
For this reaction, we had to put in some energy to "activate" the reaction, which was the energy required to break the N2
and H2 bonds. N2 and H2 brought together with no addition of energy would not spontaneously react. This is analogous to
our striking a match to start the burning of coal. The energy required to start the reaction is called activation energy. Then,
left to themselves, the N and H form bonds to release 568 calories.
What is a corresponding example with the gravitational force?
Energy System
23
2H2O
amounts
molecules
element
element
2 molecule
+
1 molecule oxygen
hydrogen
moles
2 moles
+
1 mole oxygen
hydrogen
grams
4 g hydrogen +
32 g oxygen
+
kilograms
32 kg O2
4kg H2
1. Is the energy release - exothermic or endothermic?
yields
compound
2 molecules of
water
2 moles of water
yields
yields
36g of water
36 kg of water
yields
2. Which is more stable, hydrogen gas and oxygen gas separately or combined
chemically as water? Explain.
Structural formula:
2 H-H + O=O 2 H-O-H
(drawn as linear although molecule is not)
Bonds: break old (spend energy), recombines to form new bonds (release energy)
Break 2 H-H, break O=O and in recombination, 4 H-O bonds are made and release energy. Using the bond energies of H-H
104 kcal/mole, O-O 119 kcal/mole, and H-O 111kcal/mole from Table 8, we can see how much energy is released when
bonds are broken and formed.
BONDS BROKEN
# of
Energy
Bonds
bonds
Required
H-H
2
208 kcal
O=O
1
119 kcal
327 kcal
Total:
required
BONDS FORMED
# of
Energy
Bonds
bonds
Released
H-O
444 kcal
Total:
444 kcal
released
Energy released is greater than energy required to break bonds so there is a net energy release. The reaction is exothermic.
The amount of energy released is 444 kcal minus 327 kcal which equals 117 kcal per mole of oxygen burnt or:
444 kcal - 327 kcal = 117 kcal per mole of oxygen burnt
58.5 kcal/mole of hydrogen burnt or 58.5 kcal/mole water formed.
117 kcal for 36g of oxygen; OR
58.5 kcal per 2 g hydrogen; OR
58.5 kcal released when 18 g water formed
Energy System
24
58.5 x 1000 = 5,850 kcal of energy released when 18kg water formed
5,850/18 = 325 kcal per kg water formed. The energy released (or absorbed) per mole of the product is called
"the heat of reaction." Thus the heat of reaction of water is above 58.5 kcal/mole
Reaction
1. H2 + O2 H2O
2. N2 + O2 NO2
3. C + H2 C2H6
4. C + H2 C3H8
5. N2 + H2
NH3
The ( - ) sign means that there is a net energy release when the compound is formed;
that is, the final product is lower in energy or the reaction is exothermic.
O2 (1 mole)
CO2 (1 mole)
25
C-C
O=O
O=C=O
Sources: History: Energy Information Administration (EIA), Office of Energy Markets and End Use, International Statistics
Database and International Energy Annual 1997, DOE/EIA-0219 (97) (Washington, DC, April 1999). Projections:
EIA, World Energy Projection System (2000).
Hardin, Garret. Filters Against Folly: How to Survive Despite Economists, Ecologists, and the Merely Eloquent. Viking Press, 1985.
Energy System
26
Demand-side management instead of or in addition to supply side management would mean a focus on increasing efficiency
of use and considerations of how to reduce the demand. The CAFE (Corporate Average Fuel Economy) standards legislated
in the U.S. in 1980's required a certain level of fuel efficiency of U.S. automobiles. By demanding that the corporations
figure out an overall fuel rating for all their fleets, the decisions on design and distribution of big and small cars in the total
fleet were left to the industry, as long as the total corporate fuel economy goals were met.
There are also some efforts to recapture some of the "waste energy" from the processes of energy generation. Cogeneration described in Figure 21 is an example of industries working together to see how exchanges of energy and
materials could minimize waste.
Energy System
27
Four companies (a power plant, a refinery, a gypsum facility for producing wall board, and a pharmaceutical plant) effect the
exchange shown in Figure 22. The "waste" products from the power station (including heat in the form of warm water) are
used to warm the greenhouse and other facilities. Such a co-generation system provides an industrial ecosystem with a
much higher efficiency for overall energy use than if any of the organizations had organized independently for their material
and energy needs. The ten years of planning required shows that such processes take time to explore the possibilities,
develop the relationships, then plan and execute.
Source: Energy Information Administration, International Energy Annual 1999, DOE/EIA-0219(99) (Washington, DC, January 2001.)
Source: Energy Information Administration, International Energy Outlook 2001, DOE/EIA-0484(2001) (Washington, DC, March 2001.)
Energy System
9
28
Hydropower, wind, direct solar radiation, and geothermal power are all renewable resources. Of these, hydropower is the
best developed. Starting with water wheels that converted the kinetic energy of running water into various kinds of motion,
to vast projects like the Hoover Dam, the technology for conversion of hydropower to electricity has long been explored.
While it produces no byproducts, hydroelectric power requires waterfalls or dams with a large volume of flow. In the case of
dams built for hydropower, the devastation of land and distinctive ecological niches can be large. The conflict between
development of cheap hydroelectricity, preservation of habitat, and economic interests are encapsulated in the example of
the endangerment of salmon in the Pacific Northwest, due to extensive dam building on the Columbia River. Hydropower can
also come from hot water springs, where the kinetic energy of water comes from the heat at the Earth's core.
The Sun and Energy
Except for nuclear energy, geothermal energy from the Earth's hot core, and energy from running water accelerated by the
Earth's gravitation naturally (waterfalls) or artificially (dams), all other energy on the Earth comes from the sun. The sun's
energy also plays a principal role in hydropower by driving the water cycle. The nature of solar radiation -- electromagnetic
energy from the sun -- is described in detail in the Atmospheric System.
YOU ARE HERE
On average, one square meter on the side of the Earth facing the sun receives 1400 W (Joules per second). In a 24-hour
period the total amount of energy reaching the upper atmosphere is 14.4 million calories. One-third of it is reflected back
into space by cloud cover, and the rest, traveling through the atmosphere, powers the wind and water cycle, and drives the
Earth's climate. The total sunshine entering our atmosphere every year is equivalent to 500,000 billion barrels of oil or
800,000 billion metric tons of coal! On a bright sunny day in the northern latitudes, when the sun is at the highest point,
about 1000 Watts/ m2 reaches the ground. On cloudy days, it can be as low as 200 Watts/m2.
The main problem with solar energy for high levels of use comes from the fact that it is so diffuse and spread out, and has
to be collected over large areas. In effect, this is what the foliage of plants does, storing some of the energy through
photosynthesis. It is important to note that only a small fraction of the solar spectrum -- in the violet and some in the red
region -- is used for photosynthesis. Sunlight has a large quantity of energy in the green and yellow regions, most of which
is reflected by the leaves. However, it is the capture of energy through photosynthesis, combined with elements like carbon,
oxygen, and hydrogen from the Earth and its atmosphere, which results in biomass immediately. This biomass eventually
results in a favorite fuel of today (coal) after millions of years of "processing" by the Earth. Oil and natural gas are similarly
produced from organisms buried for millions of years under rock foundations. Ancient humans used the gentle, spread out
solar energy and biomass for drying, cooking, and heating. Today's needs demand much larger quantities concentrated in
space and time. This tendency promotes rapid depletion of the solar "capital" invested into coal formation over millions of
years.
One of the less thoughtful energy uses in our convenience-dominated society is the use of "high-quality" and concentrated
energy even when "low-quality" spread-out energy would suffice. A good example is our use of fossil fuel energy driven
clothes dryers, even in the summer when clothes could just dry on a clothesline from direct solar energy. In the ideal use of
energy, we would distinguish between the needs requiring high or low "quality" energy. Using energy at the appropriate
level and from renewable resources is what is referred to by Amory Lovins as a "soft energy path." One soft technology
philosophy argues that we adapt our life styles to suit the energy available to us.
Figure 23 is derived from the proceedings of UNERG, the United Nations Conference on New and Renewable Sources of
Energy held in Nairobi, Kenya, in 1981. The figure shows the different grades of energy derived from direct solar energy.
Passive collectors are static and collect heat energy that falls on them. Active collection involves mechanisms for storing
and/or following the direction of the sun's rays to receive the maximum energy. Many ancient civilizations, including the
Egyptians, Pueblo and Anastasi Indians, and Greeks, built their houses to take maximum advantage of the sun's apparent
movement in the sky. However, as more technological energy systems developed, building with the sun's position in mind
became a lost art, especially in industrialized countries.
Energy System
29
Photon collection refers to collecting the energy through natural or artificial chemicals -- in the form of biomass (firewood,
animal dung, and waste materials) or in water or chemicals such as certain salts, which hold the heat.
To convert solar radiation into electricity, we use photovoltaic cells. Photovoltaic cells are based on the phenomenon of
photoelectricity -- that light can release electrons from certain materials. Using these materials, light can be converted
directly into electricity. This phenomenon was discovered in the late 1800's by George May in Ireland. Rudolf Hertz in
Germany produced the first photoelectric cell soon thereafter using the element selenium and Albert Einstein explained the
physics of photoelectricity in 1905. However, the first practical solar cells were only developed in the 1950's by the Bell
Telephone Company. The early version of the cell cost thousands of dollars per watt of electricity yielded. The first large
scale testing occurred in space on the NASA satellite Vanguard in 1958.
The conversion efficiency (amount of electrical energy output per input of light energy) of the largest photoelectric cells is
still below 20%. This means we have to collect sunlight over a large area for any useful application. For example, if the
conversion efficiency is 15%, we need a 6.5 square feet of photovoltaic material to power a 100-watt light bulb.
Solar technologies have made the largest inroads in space applications. Collection of solar energy by satellites for Earth's
applications have been long considered. The basic idea is that if the collection were in a geosynchronous orbit around the
Earth (35,890 km or about 22,500 miles above the equator), we could capture the energy before so much of it was
absorbed by clouds and the atmosphere. Various technical difficulties have essentially halted this SPS (Solar Power Satellite)
project.
If we followed a philosophy of ecologically friendly design, the best use of solar would be in the passive or active collection,
rather than the conversion to electricity. However, as a society, we have chosen to use electricity as the form of energy for
almost all applications and a large source of our environmental problems -- pollution, resource depletion, habitat loss -- lies
in this societal choice.
Wind is derived from solar energy moving large masses of air. The two basic phenomena that are responsible for wind
patterns are a large global circulation and local effects. Cool polar air is drawn towards the tropics to replace lighter, warmer
air that rises and moves towards the poles. This creates areas of high and low pressure and circulation patterns are set up
differently in the northern and southern hemispheres because of the Earth's rotation. This sets up the global patterns, such
as the trade winds. Locally, the circulation depends upon whether the air is over land or water. Air over oceans and large
bodies of water is cooler than that over land, and cooler air is drawn toward the land as the warmed air rises. Together
these two patterns produce movements of enormous complexity.
The wind represents kinetic energy of air arising from the thermal energy of sunlight. A large part of this energy is lost in
various functional forces, and only a small portion can be captured by windmills. High tech windmill designs have been
developed by various aircraft companies, because of their expertise in wind dynamics.
Energy System
30
In summary, the sun it still our most valuable source, powering most of our energy sources. Our survival may depend upon
a wise and judicious use of the numerous, versatile sources the sun provides.
Life Cycle of Electricity Generation
Electricity is a form of energy that has become the core of our industrial societies. The ease with which it can be
transported, stored, controlled, and used has changed the fabric of society. This section looks at the generation of electricity
from various common fuel sources.
Electrical energy is the combined potential and kinetic energy of electrons in materials. Materials that have electrons that
are mobile, rather than being confined to orbits around the atomic nucleus, can conduct electricity. Metals are prime
examples of conductors. A discovery by Michael Faraday of England in 1831 is the cornerstone of our large-scale electricity
generation. Faraday discovered that when a conductor moves in a magnetic field, an electric current is produced in the
conductor. This Faraday's Law, and the fact that we can make large magnets is the basis of an electric generator. If we can
use an energy source to move a conducting coil of wire that is placed in a magnetic field, the current produced in the wire
can then be transported to deliver electric energy. Figures 24.A-D demonstrate the sequence of electric power production
and distribution from four sources: running water, coal, nuclear fission, and wind.
Energy System
31
A power plant consists essentially of a huge generator -- a gigantic coil of wire capable of rotating in the space between the
poles of an enormous horseshoe magnet. The motion of the coil is caused by a shaft connecting it to a turbine, whose
rotation spins the coil. In all power plants then, the energy obtained from the sources has to cause the turbines to turn,
which then rotates the coil. This energy is delivered directly to the turbines by the falling water in a hydroelectric power
plant, and by the wind in a wind farm. In the case of coal and nuclear fission, the primary energy is used to transform water
into steam or high-pressure water, which then drives the turbines. Figures 24.A-D illustrate the steps prior to this, and show
the similarity of the final steps of electricity distribution for all sources.
The current from the coil is then carried to the final place of use through transmission and distribution lines. Some of the
energy is lost along the wires. To minimize this loss, the electricity is transmitted at very high voltages (thousands of volts)
along transmission lines and the voltage "stepped down" near the location of use using transformers. Electricity is then
carried over smaller distribution lines to homes and businesses for use. The huge steel towers typical of transmission lines
are a familiar sight, as are the distribution lines -- the smaller wires near buildings attached to "telephone poles."
Transformers are the ceramic structures on local distribution line poles.
Impacts of Energy Production and Use
Energy production and use produce some of the most lasting and significant environmental effects. Some of these are
discussed in detail in the Atmospheric System. Each source of energy brings with it some impacts. Here we summarize the
overall nature of the impacts.
Fossil fuels cause some of the largest impacts. In order for a typical 500-Megawatt plant to produce about 158 Terawatthours (tera = 1012) of electricity per year, it takes 1.5 million tons of coal and 0.15 million tons of limestone. It produces
emissions to the air of 1 million tons of carbon as carbon dioxide, plus 10000 tons of ash and 193000 tons of scrubber
sludge -- both of which contain large quantities of sulfur. (check numbers) Global climate change, resulting from
atmosphere increases in CO2, is described in detail in the Atmospheric System. Even seemingly slight temperature changes
can cause changes in weather patterns, climate, melting of polar ice caps, and sea-level rise.
Energy System
32
Gasoline combustion releases pollutants that, under certain conditions, give rise to photochemical smog and high levels of
atmospheric ozone. Impacts from oil drilling include destruction of ecosystems. The many impacts of extensive fossil fuel
use is discussed in detail in the Atmospheric System.
From the mining and processing of the fuels to the production stage, nuclear power requires the handling of radioactive
material. The potential for accidental release of these materials and exposure to people, and the problem of long-term
disposal of radioactive wastes, are the main environmental concerns of nuclear power.
Hydroelectric power causes disturbances in ecosystems from dams and large land use. A striking example of the loss of
biodiversity is the rapidly declining populations in the remaining species of salmon in the Pacific Northwest. The Three
Gorges Dam project currently underway in China requires the displacement of one million people, in addition to the
devastation of land and ecosystems. But the People's Republic of China has made rapid industrialization a national priority,
and this requires an enormous development of power production systems.
Alternative energy sources, such a wind and solar energy, also have large land use implications.
Energy System
33
Energy
Source
Force of
Origin
Energy production
Oil,
Petroleum
Electromagnetic
forces in atomic
bonds
Non renewable
Natural
Gas
Coal
Biomass:
Wood and
organic
waste
including
societal
waste
Hydroelectric
Electromagnetic
forces in atomic
bonds
Electromagnetic
forces in atomic
bonds
Electromagnetic
forces in atomic
bonds
Gravitational
force of water
Non renewable
Renewable
In terms of timber, it is
easily harvested and
abundant in certain areas;
but it takes a long time to
grow a tree.
Renewable
Clean resource with high
efficiency
Influenced by climate and
geography
Renewable
High economic cost
particularly in terms of startup
Dependent on climate and
geographical location
Need a storage system for
the energy to ensure
reliability
Not advanced enough for
global use
Renewable
Central-thermal systems to
convert solar energy directly
to heat
More competitive
economically than
photovoltaics
Dependent on climate and
geographical location
Extracts heat from
underground masses of hot
rock.
Technology is still
undeveloped.
Can be geographically
dependent
Electromagnetic
energy from
the sun
Solar
Power (solar
thermal)
Electromagnetic
energy from
the sun
Geothermal
Gravitational
pressure and
nuclear
reactions in the
Earth's core
Wind
Power
Gravitational &
electromagnetic
energy from
the sun
Renewable
Unlimited resource that is a
very clean process, no
pollutants
Strong nuclear
forces in
nuclear bonds
Weak nuclear
Nuclear
Fusion
Environmental Impact
Non renewable
Solar
Power
(photovoltaics)
Nuclear
Fission
Usage
Consumption is localized
Efficient
Energy System
34