Professional Documents
Culture Documents
Training Center
Automation and Drives
THAILAND
1. Introduction
2. PLC Introductory course
3. Course overview and Pricing
4. Course content
5. Course Schedule
6. Terms and Condition
7. Contact us
8. Registration Form
Page 1 of 9
Tel. (662) 715 4866, (662) 715 4571 Fax. (662) 715 4861, (662) 715 4841 Hotline : (662) 715 4141
e-mail : sirirutj@siemens.com website http:// www.sitrain.com/th
rd
1. Introduction
The Information and Training Center for Automation & Drives is one of the more than 100 training
centers worldwide which provide Siemens training programs in automation. The Training Center was
established on 1998. With assistance from the parent training center in Nuremberg, Germany, the
center offer training programs with a wide range of industrial automation courses including SIMATIC
PLC SIMATIC S5, SIMATIC S7 and HMI (human machine interface)
SIMATIC PLC courses include system-training courses for the SIMATIC S5, S7 and HMI (humanmachine-interface) courses Protool courses. The training is provided to train project engineers,
maintenance personnel and operators.
Page 2 of 9
Tel. (662) 715 4866, (662) 715 4571 Fax. (662) 715 4861, (662) 715 4841 Hotline : (662) 715 4141
e-mail : sirirutj@siemens.com website http:// www.sitrain.com/th
rd
Course Code
Prerequisites
Duration
Fee
9.00-17.00 hr.
ST-S5SYS1
Automation background
4 days
B.14,900.00
ST-S5SYS2
ST-S5SYS1
4 days
B.14,900.00
SIMATIC S5-Service
ST-S5SERV
ST-S5SYS2
4 days
B.14,900.00
SIMATIC S7-Programming 1
ST-S7PRO1
Automation background
5 days
B.15,500.00
SIMATIC S7-Troubleshooting
ST-S7STOE
ST-S7PRO1
4 days
B.14,900.00
SIMATIC S5-S7-Upgrade
ST-S7UPPROG
ST-S5SYS2
4 days
B.14,900.00
Workshop ProTool
BBOPSYS
ST-S5SYS2 or
ST-S7PRO1
2 days
B.6,000.00
Page 3 of 9
Tel. (662) 715 4866, (662) 715 4571 Fax. (662) 715 4861, (662) 715 4841 Hotline : (662) 715 4141
e-mail : sirirutj@siemens.com website http:// www.sitrain.com/th
rd
4.Course Content
Basic operations of the programming language STEP5 (logical operations, memory operations, timer-/counter
operations, load and transfer operations, comparing operations, arithmetic operations)
2.ST-S5SYS2
SIMATIC S5 System 2
Description
This course is directed at users from all field, who would like to succeed in an easy task with SIMATIC S5-Machine or for
example who would like to know SIMATIC S5 mode of operation and Application of store programmable steering.
The examples of SIMATIC S5 mode of operation and using the PLC will be given in this course.
Requirement for this course is a basic knowledge of course ST-S5SYS1. ST-S5SYS1 the basic course for the participant
of advance course ST-S5SERV or ST-S5PRG1.
Objective/Content
Going into detail of basic operations and using parts of additional features of the programming language Step5
Data blocks and function blocks, calling routines, characteristics and possibilities of applications
Starting behavior, principles of time controlled program execution and analog value processing.
Intensive practicing on realistic systems using the programming device, the automation device and a plant model
Prerequisites requirements: ST-S5SYS1
Hint: This course ST-S5SYS consists of 2 parts. The requirement is ST-S5SYS1 for the participant ST-S5SYS2.
3. ST-S5SERV
SIMATIC S5 Service
Description:
The course is directed at operation, service and assembly personnel of SIMATIC S5 controllers. The knowledge
from courses ST-S5SYS1 and ST-S5SYS2 will be consolidated and broadened.
Objectives/Content:
Page 4 of 9
Tel. (662) 715 4866, (662) 715 4571 Fax. (662) 715 4861, (662) 715 4841 Hotline : (662) 715 4141
e-mail : sirirutj@siemens.com website http:// www.sitrain.com/th
rd
System overview
Ability to structure, generate, document and put into operation extensive PLC programs with
SIMATIC S7
Being acquainted with the structure and execution of programs in SIMATIC S7 programmable controllers and the
structure of the IEC 1131 automation standard.
Ability to use the STEP 7 tools for generating, documenting and testing of programs and for troubleshooting, module
configuration and parameter assignment.
Ability to use absolute and symbolic addressing
Being in a position to evaluate system information of the programmable controller
Being able to handle data types, data storage and archiving
Configuring and implementing homogeneous communication links via the MPI interface
Being acquainted with the basics of the integrated DP-interface.
The knowledge gained on all these aspects is consolidated by practical exercises using the S7-300 programmable
controller and a plant model
2. ST-S7STOE
SIMATIC S7 Troubleshooting
Description
This course is directed at users working in the fields of operation, maintenance and assembly who have already acquired
a knowledge of SIMATIC S7 in their particular field of activity. The course focuses mainly on the detection and correction
of faults in both hardware and software.
Objectives/Content
Gaining familiarity with the system and program documentation and learning how to use it
Becoming acquainted with the STEP 7 software for detecting and correcting faults and learning how to use it
Checking the hardware and software of a system
Recognizing and eliminating software faults resulting in stop
Recognizing and eliminating logical software errors, e.g. multiple assignment
Saving and documenting the program changes made
Diagnosing program errors using I STACK and B STACK
Extended test functions
Troubleshooting in networked programmable controllers
Program corrections using optional packages
Prerequisites requirements: ST-S7PRO1
Page 5 of 9
Tel. (662) 715 4866, (662) 715 4571 Fax. (662) 715 4861, (662) 715 4841 Hotline : (662) 715 4141
e-mail : sirirutj@siemens.com website http:// www.sitrain.com/th
rd
3. ST-S7UPPROG
SIMATIC S5-S7 Upgrade
Configuring, Commissioning, Service
Description
This course is directed at users with engineering experience in the fields of configuring, commissioning and service, who
are already capable of solving complex tasks with SIMATIC S5, as well as at users from the areas installation, service and
maintenance that have excellent experience regarding SIMATIC S5.
Objectives/Contents
Workshop ProTool
BB-OPSYS
Description
This course is intended for anyone who needs detail. Information
Objective/Content
Familiarization with the function scope of the COROS OP27/OP35/OP45 operator panels and being able to program
them and put them into operation
Becoming acquainted with the function scope of the editors for process visualization and operator-process
communication
Creation process displays with character-graphics and pixel graphics configuring interfaces, e.g. Paintbrush
Connection concept
Communiction/AS511/Standard FB/MPI/PPI
Generation messages
Duration : 2 days
Prerequisites requirements:
Sufficient knowledge of SIMATIC S5 or S7 (Courses ST-S5SYS1 and ST-S5SYS2 or ST-S7PRO1 )
Page 6 of 9
Tel. (662) 715 4866, (662) 715 4571 Fax. (662) 715 4861, (662) 715 4841 Hotline : (662) 715 4141
e-mail : sirirutj@siemens.com website http:// www.sitrain.com/th
rd
5. Course Schedule
In Year 2003-2004 the regular course are follows;
Duration
06 - 10 Oct.2003
13 - 17 Oct.2003
20 - 21 Oct.2003
27 -31 Oct.2003
03 - 07 Nov.2003
10 14 Nov.2003
17 - 20 Nov.2003
24 - 27 Nov.2003
Course Title
SIMATIC S7 Program 1
SIMATIC S7 Program 1
ProTool
SIMATIC S7 Program 1
SIMATIC S7 Program 1
SIMATIC S7 Program 1
SIMATIC S5 System 1
SIMATIC S5-Service
15 - 18 Dec.2003 S7 Troubleshooting
22 - 26 Dec.2003 SIMATIC S7 Program 1
Duration
Course Title
29 - 02 Apr.2004 SIMATIC S7 Program 1
19 - 23 Apr.2004 SIMATIC S7 Program 1
26 - 30 Apr.2004 SIMATIC S7 Program 1
***
***
03 - 04 May.2004 ProTool
17 - 20 May.2004 SIMATIC S5 System 2
24 - 28 May.2004 SIMATIC S7 Program 1
31 04 Jun.2004
07 10 Jun.2004
14 17 Jun.2004
21 25 Jun.2004
SIMATIC S7 Program 1
S7 Troubleshooting
SIMATIC S5 System 1
SIMATIC S7 Program 1
***
***
***
***
05 09 Jan.2004
12 15 Jan.2004
19 20 Jan.2004
26 30 Jan.2004
SIMATIC S7 Program 1
S7 Troubleshooting
ProTool
SIMATIC S7 Program 1
28 02 Jul.2004
12 16 Jul.2004
19 22 Jul.2004
26 29 Jul.2004
SIMATIC S7 Program 1
SIMATIC S7 Program 1
S7 Troubleshooting
SIMATIC S5 System 1
***
***
***
***
02 06 Feb.2004
09 12 Feb.2004
16 20 Feb.2004
23 27 Feb.2004
SIMATIC S7 Program 1
SIMATIC S5 System 2
SIMATIC S7 Program 1
SIMATIC S7 Program 1
02 - 06 Aug.2004
09 - 10 Aug.2004
16 - 19 Aug.2004
23 - 27 Aug.2004
SIMATIC S7 Program 1
ProTool
SIMATIC S5 System 1
SIMATIC S7 Program 1
***
***
***
***
01 05 Mar.2004
08 11 Mar.2004
15 18 Mar.2004
22 26 Mar.2004
SIMATIC S7 Program 1
SIMATIC S7 Program 1
SIMATIC S5 System 1
SIMATIC S7 Program 1
30 - 03 Sep.2004
06 - 09 Sep.2004
13 - 17 Sep.2004
20 - 24 Sep.2004
***
***
***
***
SIMATIC S5-S7-Upgrade
SIMATIC S5-S7-Upgrade
SIMATIC S7 Program 1
SIMATIC S7 Program 1
*** Remark: The schedule date in year 2004 may be changed, depend on the special holidays and the
special courses. Revise version will be public at the beginning of the year 2004.
Training programs are scheduled at fixed dates during the year. To register, please let us know at least one
week before course schedule in advance. Course booking will be done by first-in-first order. We reserve the
right to postpone the course to a later schedule in case of course fully booking or participant less than 4
people had signed up or registered.
Page 7 of 9
Tel. (662) 715 4866, (662) 715 4571 Fax. (662) 715 4861, (662) 715 4841 Hotline : (662) 715 4141
e-mail : sirirutj@siemens.com website http:// www.sitrain.com/th
rd
Additional S5 and S7 training courses and the other courses listed above will be also scheduled on
demand. Please, let us know what your training needs are. We will schedule courses according to your
needs.
On-Site Training
We also provide training on-site at your company premises with Extra Charged. On-site training
arrangements should be made at least one month before the starting date of the course. Please, contact the
training co-ordinator or Training Manager
Contact Persons
For general information about Training Center and Registration please contact
Training Coordinator: Ms. Sirirut Jareanvichayadaj
Tel: ( 662 ) 715 4866
Fax: ( 662 ) 715 4861
Email: SirirutJ@siemens.com
For any other special training requests please contact our training manager:
Mr. Wiboon Thamtinno
Tel: ( 662 ) 715 4571
Fax: ( 662 ) 715 4861
Email: WiboonT@siemens.com
Training Center Bangkok Thailand
Email: sirirutj@siemens.com
Website http://sitrain.com/th
Training Center worldwide (in Germany and other country) website http://sitrain.com
Page 8 of 9
Tel. (662) 715 4866, (662) 715 4571 Fax. (662) 715 4861, (662) 715 4841 Hotline : (662) 715 4141
e-mail : sirirutj@siemens.com website http:// www.sitrain.com/th
rd
REGISTRATION
Ms. Sirirut Jareanvichayadaj
From:
SirirutJ@Siemens.com
Fax to:
E- mail
Company
SIEMENS LTD.
Automation & Drives
Training Center
Company:
Tel:
Tel:
Fax:
Fax:
Name of Course:
Requested Date of Training:
Ending Date:
Position
2.
Position
3.
Position
4.
Position
Company:
Address:
Tel:
Fax:
( )
Tel. (662) 715 4866, (662) 715 4571 Fax. (662) 715 4861, (662) 715 4841 Hotline : (662) 715 4141
e-mail : sirirutj@siemens.com website http:// www.sitrain.com/th
rd