Professional Documents
Culture Documents
Page-2 of 2
Paint shop Layout:
1.Paintshop Lighting to be ex-proof.
2.No separation for CS/SS scopes in the layout.
3.No blasting chamber for manual blasting of delicate surfaces and irregular shapes.
4.Air extraction to be close to the floor to catch atomized painting particles suspended on the
air due to high pressure spraying, extraction must have built-in filters to clean the air,
extraction fans and filtering boxes to be installed on the paint shops sidewalls. Overhead
extraction system with a single/common extraction fan may not be effective because the
coating materials to be used are mostly high density type.
NoteSubcontractor may consider the below detailed workflow to minimize the cost and
progress of blasting/painting activities and overall fabrication in general:
1.Fabrication of pipe spools as per the iso drawings.
2.Inspections (Dimensional, NDT) and final release for painting.
3.Blasting/Painting as per Project requirements and release of finished spools to spool yard or
for site erection.