1-run the script under /usr/local/pms/bin/MfpmsStart.sh stop (to stop the
BSC) (run this script on the standby and then on the active) 2- change mode of the DLS ( so than you can overwrite it ) using the following procedure telnet on OMCP1then type these commands #cd /common/bsc/SCPRDISK #ls lrt <DLS name> #chmod 777 <DLS name> do the same on OMCP2 3-then use the attached tool winscp ( or filezilla ) to make ftp to one of the OMCP then copy the DLS to it (it will overwrite the old) 4- then go to the Path of the DLS /common/bsc/SCPRDISC then copy it from that OMCP to the other one using the command scp "the DLS name " the distination path:the ip of the other board or scp ipofotherboard:/then the path . ( or you can FTP on Both OMCP ) 5-then u reset the BSC using the following script using the following procedure -telnet on OMCP1 -# /usr/local/bin/mx_shelfReset
The Complete HVAC BIBLE for Beginners: The Most Practical & Updated Guide to Heating, Ventilation, and Air Conditioning Systems | Installation, Troubleshooting and Repair | Residential & Commercial
The Complete Guide to Alternative Home Building Materials & Methods: Including Sod, Compressed Earth, Plaster, Straw, Beer Cans, Bottles, Cordwood, and Many Other Low Cost Materials