Professional Documents
Culture Documents
3 Bee
3 Bee
F.E. Sem. I
Basic Electrical and Electronics Engineering
Prelim Question Paper
Time : 3 Hrs.]
N.B. :
[Marks : 80
[4]
ka
20
an
10 V
10
al
[4]
[4]
[4]
[4]
[10]
dy
Vi
25V
[10]
10
2
12V
1013/Engg/FE/Pre Pap/2013/BEE
[10]
[10]
4. (a) 2 wattmeters are connected to measure the input to a 400V, 3, 50Hz, star
connected motor. The motor output is 24.4 kW. The motor has an
efficiency of 80% and input power factor is 0.4(lag). Calculate the
resistance and reactance of motor per phase also calculate readings of the
wattmeters.
(b) Draw circuit diagram of a transistor connected in CE configuration. Also
draw it's output characteristics and input characteristics.
(c) Explain the importance of O.C. and S.C. tests. Why are Power transformers
not tested at full load? Explain how these tests are conducted, also explain
why is S.C. test preferably conducted on H.V. side and O.C. test on L.V. Side.
[8]
ka
an
50mH
[4]
[8]
[10]
[10]
j10
al
40F
j9
dy
10
100 Hz
Vi
(c) Derive expressions for RMS, DC voltages of a C.T. Full wave rectifier. Also
find the ripple factor, efficiency of rectification and TUF.
(d) Find the resultant of following AC quantities :
v1(t) = 100 sin (2t + (/3))
v2 (t) = 75 cos (2t + (2/3))
v4 (t) = 110 sin (2t + (/4))
v3 (t) = 150 sin (2t (/2))
Draw the phasor diagram.
1013/Engg/FE/Pre Pap/2013/BEE
[4]
[7]
[4]
[5]