Professional Documents
Culture Documents
Release Notes
Release Notes
07/04/2012
1. Add frame for MJPEG format
2. Improve AE unstable issue when face disappear and appear switch
3. Change Chicony PID VID: 04F2, B35C to 04F2,B37C
4. In the period of 10 seconds from preview start, show frame if the Face been d
istinguished
8/8/2012
1. Fix the Garbage issue in WIN8 Metro AP preview
and AMD platform( Platfrom issue)
2. Modify selective suspend procedure to fix blue screen
issue under WIN8 DTM testing ( system - sleep and PNP
(disable and enable) with IO Before and After (Platfrom issue)
3. Modify driver memory managerment for WIN8 DTM( Platfrom issue)
4. For Face AE, When AE target is low than 0x60 under low light, The Face AE dri
ver will
increase the target to make Face detection possibility
5. Add delay in selective suspend procedure to fix DTM " USB internal device idl
e" issue
( Platfrom issue)
8/24/2012
fix below issues
1. Get BSOD 0xd1 when open YouCam after cold boot
2. Get BSOD 0x133 when close YouCam after cold boot
3. Camera APP( build Win8 9200) get no image issue after resume ( S3)
10/23/2012
1. In the period of 3 seconds from preview start, show frame if the Face been di
stinguished
2. FaceAE function default value is off
3. Add PID: B3BD and VID: 04F2
4. Camera APP( build Win8 9200) get no image issue after resume ( S3)
5. Sleep and PNP (disable and enable) with IO Before and After (Certification) t
est failed on BSOD
( disable auto anti flicker and give more light to keep frame rate is 30fps)
8/29/2013
1. Adjust delay time for " Webcam performance system test"
and no need to disable auto anti flicker function
9/05/2013
1. Add time stamp to fix " Webcam performance system test" issue
2. Fix 16:9 to 4:3 of resolution 800x600 issue under metro APP
3. Fix " BSOD" issue when running Sleep and PNP with IO
9/11/2013
1. Remove time stamp solution and add a data flow control
to fix "Webcam performance system test " issue.
in 905 version, To add time stamp will cause " Webcam performance
system test " failure.
2. Fix 16:9 to 4:3 of resolution 800x600 issue under metro APP.
Remove " allocate memeory " solution because some of VGA
driver will casue abnormal image.The new solution is for any
resolution
9/26/2013
Below issue is not driver problem and it is related to AP behavior
( in box driver also get proboem)
1. When Amcap's " set frame rate" to be 15fps for default and actully the frame
rate
is 30fps, The preview will be failed when extend pannel display. The dirver will
ingore 15fps
image data to display.