AMC | Jeep! RENAULT
NATIONAL PARTS DISTRIBUTION CENTER,
Page | of 1 Issued 11/1/77
11419
INSTALLATION INSTRUCTIONS FOR SEAT BELT RELAY JUMPER KIT #812 9377
MODEL: 1973/75 With Seat Belt Interlock Ignition,
MATERIAL LIST:
Qty Description Part Number
1 Wire, Jumper (A) 812 9375
1 Wire, Jumper (B) 812 9376
1 Instruction Sheet 11419
PROCEDURE:
CAUTION:
On Vehicles with automatic transmission, the following rework is required,
This will allow the vehicle to start only when the transmission is in ''PARK!
‘or "NEUTRAL" position,
Remove and discard the interlock bypass relay.
Replace the existing case grounded start solenoid with start solenoid
part number 321 5394 which has a separate ground terminal,
Install three connector jumper into the three terminal connector
disconnected from the relay.
Install two connector jumper into the two terminal connector dis-~
connected from the relay and connect the remaining end of the jumper
to the new start solenoid ground terminal.
On Vehicles With Manual Transmission:
Remove and discard the interlock bypass relay.
Install three connector jumper into the three terminal connector
disconnected from the relay.
= come w
se ay Soe D