Professional Documents
Culture Documents
AUSTRALIAN
Principal Office
ASP Access Floors Pty Ltd
32 Prime Drive
Seven Hills, 2147, NSW
Sydney Australia
T / + 61 2 9620 9915
F / + 61 2 9092 9918
E / sales@aspfloors.com.au
www.aspfloors.com.au
Product Guide
2011/12
Our product
Our Staff
At ASP we work hard to ensure that the
quality of our service reflects that of our
outstanding product range. Just as we
invest continually in product R&D, we
spend time ensuring that our staff are
equipped with all of the skills required
to ensure projects run smoothly.
Design Process
ASP offer a wide variety of products to suit all possible room
applications, from Airport towers to Research facilities. Our team
are trained to offer the best solution for your construction needs,
from floor type to floor finishes. We can also advise the best
products to reach the highest LEED certification for your building.
Application
Recommended System
CF Series
CF Series
CF Series
CF Series
CF Series
CF Series
Research Facilities
A or H Series
Hospitals
A or H Series
Banks
CF or A Series
Control Rooms
CF Series
Concentrated load
A load is applied onto a
25mm x 25mm steel indentor
and the deflection of the panel
is measured. The deflection
should not exceed 2.5mm for
the concentrated load specified
and should not show any
permanent deflection.
Ultimate load
A higher load is applied onto a 25mm
x 25mm steel indentor until the
panel collapses or shows permanent
deformation. The ultimate load
should be a minimum of three times
the concentrated load, resulting in a
safety factor of three.
Uniform load
A load is applied over a 1m x 1m
area and the deflection of the
system is measured. The deflection
should not exceed 2.5mm for the
uniform load specified.
Impact load
A load is dropped from
900mm onto a 25mm x 25mm
steel indentor without the
system collapsing.
Rolling load
A load is rolled back and forth
across the panel through three
different size wheels. Deflection
of the panel is measured after
10, 10,000 and 40,000
continuous cycles.
CF Series
Cement filled
Lightweight cementitious
for support
additional strength
Panel
10
Panel
weight
(kg)
Concentrated
Load (kN)
Ultimate Load
(kN)
Uniform Load
(kN/m2)
Understructure options
Pedestal: T1, T2, T3, T4
Stringer: Stringeless
CF Series Panels are available in
standard sizes of;
600mm x 300mm
600mm x 600mm
610mm x 610mm
600mm x 800mm
Custom sizes are available on request.
Suitable with T1, T2, T3, T4,
and T8 Pedestals.
10,000
Passes
40,000
Passes
CF 3.7
14.0
3.7
14.7
9.4
550
3.5
2.7
2.25
CF 4.5
14.5
4.5
16.9
12.0
670
4.5
3.6
2.25
CF 5.7
15.5
5.7
22.3
14.4
690
5.6
4.5
2.25
CF 6.8
17.0
6.8
26.7
18.0
780
6.7
5.6
2.25
CF 8.9
18.5
8.9
31.2
24.0
890
8.9
8.0
2.25
Cement filled
CF Series
CF Series Panel
Clipon AT Stringer
T3 Padestal
Panel
Panel
weight
(kg)
Concentrated
Load (kN)
Ultimate Load
(kN)
Uniform Load
(kN/m2)
Understructure options
Pedestal: T1, T2, T3, T4
Stringer: AT Stringer
10,000
Passes
40,000
Passes
CF 3.7
14.0
3.7
14.7
9.4
550
3.5
2.7
2.25
CF 4.5
14.5
4.5
16.9
12.0
670
4.5
3.6
2.25
CF 5.7
15.5
5.7
22.3
14.4
690
5.6
4.5
2.25
CF 6.8
17.0
6.8
26.7
18.0
780
6.7
5.6
2.25
CF 8.9
18.5
8.9
31.2
24.0
890
8.9
8.0
2.25
11
Cement filled
T6 Padestal.
Panel
12
Panel
weight
(kg)
Concentrated
Load (kN)
Ultimate Load
(kN)
Uniform Load
(kN/m2)
10,000
Passes
40,000
Passes
CF 3.7
14.0
3.7
14.7
9.4
550
3.5
2.7
2.25
CF 4.5
14.5
4.5
16.9
12.0
670
4.5
3.6
2.25
CF 5.7
15.5
5.7
22.3
14.4
690
5.6
4.5
2.25
CF 6.8
17.0
6.8
26.7
18.0
780
6.7
5.6
2.25
CF 8.9
18.5
8.9
31.2
24.0
890
8.9
8.0
2.25
13
14
A Series
Aluminium
High Strength
Panel
Panel
weight
(kg)
Understructure options
Gravity fix stringerless
Gravity fix with stringers
Suitable with T9, T10, T11, T12
A4.5
7.0
22
4.5
13.5
12.0
0.67
4.5
3.6
2.8
7.5
23
5.7
17.1
20.0
0.69
5.7
4.5
2.8
A6.8
9.0
28
6.8
20.4
24.0
0.72
6.8
5.7
2.8
A13.5
14.0
42
13.4
40.2
36.3
1.10
13.4
12.7
2.8
A5.7
15
H Series
Hollow
Understructure options
Gravity fix stringerless
Gravity fix with stringer
Screw fixed
H Series Panels are available in
standard sizes of;
600mm x 300mm
600mm x 600mm
610mm x 610mm
Custom sizes are available on request.
Panel
16
Panel
weight
(kg)
Concentrated
Load (kN)
Ultimate Load
(kN)
Uniform Load
(kN/m2)
10,000
Passes
40,000
Passes
H 3.7
9.0
3.7
14.7
9.4
550
3.5
2.7
2.25
H 4.5
9.5
4.5
16.9
12.0
670
4.5
3.6
2.25
H 5.7
10.5
5.7
22.3
14.4
670
5.6
4.5
2.25
H 6.8
12.0
6.8
26.7
18.0
780
6.7
5.6
2.25
H 8.9
13.5
8.9
31.2
24.0
890
8.9
8.0
2.25
Glass
G Series
Perforated
P Series
17
asp pedestals
T1
asp pedestals
T2
18
asp pedestals
T3
asp pedestals
T4
19
asp pedestals
T5
asp pedestals
T6
20
asp pedestals
T7
asp pedestals
T8
21
asp
Stringer System
WG6 Bolted
SG6 Bolted
22
23
ASP Accessories
Floor Grommets
ASP Access Floors provide
Screwed in
in place
Pushed in
Economical
Easy installation and
maintenance
Fibre Grommets
Service Boxes
Airtight
24
ASP Accessories
Air Distribution
ASP Access Floors have
distribution system.
climate control.
Air Grills
distribution
Trimmings
Panel Lifters
load ratings and give users the ability to rearrange the floorplan
in Aluminium.
the latest pressure seal lifters and traditional clip down designs.
These can be provided with a custom wall mount and include a
personalised instruction sheet to suit each installed product.
25
Design Service
ASP Access Floors not only provide the full
functionality and freedom that our access
floors create but also offer a range of
surface finishes to compliment the interior
design of your project. From carpet and
stone, to wood, bamboo and vinyl finishes;
we are also able to customise our range to
suit your needs. We also offer a number of
environmentally friendly treatments created
from recycled and sustainable materials.
26
27
28
29
Carpet
Carpet is the traditional flooring finish of
choice because of its endless variety of
colours, patterns and wear needs. ASP work
closely with our suppliers to offer you the
widest range of carpet tile products including
ranges made from recycled content.
30
Wood
Wooden flooring is available in several
grades, widths and thicknesses. Because
wood is a natural resource it is low in toxins,
renewable and recyclable. Most wooden
floors today are prefinished with UV cured
polyurethane layers to protect the wood.
31
HPL
HPL provides the closest to maintainance
free finish available on the market
today. Laminates come in a huge range of
finishes which can be applied at the time of
manufacture, making them fast to install and
incredibly durable.
32
Surface Resistivity
Volume Resistivity
Combustion
properties
2000 Turns
F1
33
34
Marble/Granite
Marble, granite and agglomerate stone
exude natural beauty while providing
excellent durability. Its artistic beauty will
remain as bright and vibrant as the day it
was installed. Being a natural product it has
low toxin emission and is easily recyclable.
35
4 pipe
4 pipe
fancoil
fancoil
saved
savedspace
space
fresh
fresh
airair
light
light
fitting
fitting
Underfloor AC
Our air distribution system offers better
ventilation by forcing contaminants and
heat directly to return air vents. This can
reduce energy consumption by as much as
30% and improves air quality for tenants.
Our ASP underfloor AC is a discreet
design that offers individual occupants
a customised local environment. The
speed of installation at construction and
the decreased ceiling height required can
result in huge cost savings.
All ASP products are zinc whisker free
36