Professional Documents
Culture Documents
The 2007 Edition of this Code contains revisions in addition to the 2004 Edition with 2005 and 2006 Addenda.
The revisions are identified with the designation 07 in the margin and, as described in the Foreword, become
mandatory six months after the publication date of the 2007 Edition. To invoke these revisions before their
mandatory date, use the designation 2007 Edition in documentation required by this Code. If you choose not
to invoke these revisions before their mandatory date, use the designation 2004 Edition through the 2006
Addenda in documentation required by this Code.
The BC numbers listed below are explained in more detail in List of Changes in BC Order following this
Summary of Changes.
Changes given below are identified on the pages by a margin note, 07, placed next to the affected area.
Location
Page
Change
xliiixlvi
Revised (BC02-3773)
xlvii /lvi
Acceptable Non-ASTM
Editions
lvii
SA-204/SA-204M
319/321
SA-225/SA-225M
357/360
SA-266/SA-266M
433/437
SA-268/SA-268M
439/447
SA-370
643/700
SA-376/SA-376M
707/716
SA-387/SA-387M
717/723
SA-455/SA-455M
841/843
SA-479/SA-479M
851/861
SA-508/SA-508M
917/926
SA-515/SA-515M
953/956
SA-516/SA-516M
957/962
SA-563
1055/1065
SA-649/SA-649M
1173/1177
SA-666
1191/1200
SA-736/SA-736M
1311/1315
SA-737/SA-737M
1317/1319
SA-788/SA-788M
1397/1411
SA-965/SA-965M
1545/1551
SA/AS 1548
1649
SA/CSA-G40.21
1651
SA/EN 10020-2
1653
SA/EN 10020-3
1655
SA/JIS G3118
1657
NOTE: Volume 57 of the Interpretations to Section II, Part A of the ASME Boiler and Pressure Vessel Code
follows the last page of the Edition to Section II, Part A.
lxi
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
--``,,,,```,,``,```,,,`,`,`,``,-`-`,,`,,`,`,,`---
Change
BC00-433
BC02-3773
BC03-1765
BC04-1377
BC04-1378
BC04-1559
BC04-1576
BC04-220
BC04-379
BC04-380
BC04-386
BC04-387
BC04-389
BC04-390
BC04-916
BC04-977
BC05-1285
BC05-1287
BC05-1288
BC05-1289
BC05-1290
BC05-1456
BC05-1651
BC06-268
lxii
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS