You are on page 1of 2

REFFERENCES

[1] ASHRAE Handbook of Fundamentals, 1985


[2] ASHRAE Handbook of Fundamentals, 1987
[3] ASHRAE Handbook of Fundamentals, 2001
[4] Review of Cooling load calculation method by Ala Hasan
www.scibd.com/doc/39769169/Tiedosto-11-Cooling-Load-Calculation-Method-20-8-03
[5] F. C. McQuiston, J. D. Parker, J. D. Spitler, Heating, Ventilating, and Air Conditioning,
Analysis and Design, 5th ed., John Wiley & Sons, Inc., 2000.
[6] C. O. Pedersen, D. E. Fisher, J. L. Richard, Development of a Heat Balance Procedure for
Calculating Cooling Loads, ASHRAE Transactions, v 103, n 2, 1997, p 459 - 468.
[7] Rees, S. J., Spitler, J.D., Haves, P., Quantitative comparison of North American and U.K.
cooling load calculation procedures results, ASHRAE Transactions, v 104, n 2, 1998, p 47-61
[8] AHRAE Handbook of fundamentals 1993
[9] AHRAE Handbook of fundamentals 1997
[10] Malkawi, A., Wambaugh, A New System For Accessing Transfer Function Coefficients For
an Architectural Computer-Aided Thermal Optimization Tool, In Proceedings of the 5th
International Building Simulation Conference, September, 1997, Prague, Czech Republic.
[11] CIBSE GUIDE, Volume A, DESIGN DATA, 1986.
[12] Rees, S.J., Spitler, J.D., Haves, P., Qualitative comparison of North American and U.K.
cooling load calculation methods, HVAC&R, v 6, n 1, 2000.
[13] J. D. Spitler, F. C. McQuiston, K. L. Lindsey, The CLTD/SCLF/CLF cooling load
calculation method, ASHRAE Transactions, Vol. 99, Part 1, 1993.
[14] Heating & cooling of buildings design for efficiency by J.F.Kreider, Curtiss, Rabl, CRC
press 2010.
[15] Qualitative comparison of North American & U.K. cooling load calculation methods by
Simon J.Rees, Ph.D, Member ASHRAE, Morris G. Davis, Jeffrey D.Spitler, Ph.D., P.E.,
Member ASHRAE, Philip Haves, Ph.D.,P.E., Member ASHRAE published in HVAC & R,
Research vol. 6, No. 1, Jan 2000. 2000 ASHRAE.

[16] VDI 2078, Cooling Load Calculations of Air-conditioned Rooms, VDI Cooling Load
Regulations, July 1996
[17] http://www.mech.hku.hk/bse/MEBS6006/mebs6006_0910_05-energy
[18] http://en.wikipedia.org/wiki/Cooling_load_temperature_difference_calculation_method

You might also like