Professional Documents
Culture Documents
32-PLC Address Formats
32-PLC Address Formats
EPLAN Training
EPLAN Training
Separate address formats are possible for digital and analog inputs and outputs. How
you define the address format for digital inputs and outputs is described below. You
also define the address format for analog inputs and outputs in the same manner.
1. Select the menu item Project data > PLC > Settings.
2. In the Settings: PLC, click [...] next to the Settings: PLC-specific field.
EPLAN Training
EPLAN Training
7. In the Format: Counter dialog, you define the format for the counter. Select
the number system to be used for displaying the counter, define the start and
end values for the addressing and also the number of digits.
8. Click [OK].
EPLAN Training
10. In the Format: Separator dialog, you define the character to be used for
displaying the separator.
12. Format the next counter and separator in the manner described above and
continue until the desired address format has been built. Every counter and
separator can be defined separately from each other.
EPLAN Training
EPLAN Training
EPLAN Training