Professional Documents
Culture Documents
36-Numbering Devices Offline
36-Numbering Devices Offline
EPLAN Training
General Procedure........................................................................................3
2.2
4.1
4.2
EPLAN Training
General Procedure
schematic.
This functionality is only available for certain module packages. Info
EPLAN Training
Precondition:
You have opened a project.
2.1
You can number devices in the page navigator, the device navigator, or the graphical
editor. Which option you choose depends on which scope of numbering you need.
1. Select a project, pages, functions, or structure identifier layers.
EPLAN Training
2.2
Precondition:
You have selected a project, a page, a function, or a structure identifier layer.
1. Select Project data > Devices > Number.
In the Number (offline) dialog, all devices contained in the numbering
range are listed.
4. Click [OK].
In the Number (offline): Preview of result dialog the devices are shown
with the new numbering. In this dialog you can edit the DT numbering.
EPLAN Training
EPLAN Training
Before you accept the new numbering of the devices into the schematic, you can edit
the individual numberings.
Preconditions:
In the page navigator, the graphical editor or the device navigator, you have
selected devices for numbering and under Project data > Devices >
Numbering in the Number (offline) dialog, you have selected the Preview of
results check box.
The Numbering (offline): Preview of result dialog is opened and contains newly
numbered devices.
3.1
3.1.1
1. In the Number (offline) dialog, click: Preview of result, click in a field in the
New DT column.
EPLAN Training
3.1.2
For longer DTs with similar structure, there is the option of copying one or more DTs
and inserting them in a different place.
1. Hold down the [SHIFT] key and select all the rows to be copied.
3. Position the mouse pointer in the row into which the selected contents should
be copied.
EPLAN Training
3.1.3
1. In the Numbering (offline): Preview of result dialog, click in the row with the
device you want to edit.
EPLAN Training
3.2
1. To accept the new numbering directly into the schematic, click [OK].
EPLAN Training
10
If you don't want to use any existing numbering format, you can specify a new
numbering format.
Preconditions:
You have selected devices for numbering in the page navigator, the graphical
editor, or in the device navigator.
You have opened the Number dialog (Project data > Devices> Number).
4.1
EPLAN Training
(New).
11
3. Click [OK].
EPLAN Training
12
5. In the Format Page / Column / Row dialog in the Minimum number of digits
field, specify the number of digits to be displayed for the selected format
element, and click [OK].
EPLAN Training
13
EPLAN Training
14
4.2
1. In the dialog Settings: Number (offline) dialog, select the format in the
Scheme field that you want to delete.
2. Click
(Delete).
EPLAN Training
15
EPLAN Training
16