For best results, print this template on matte photo paper or card stock. Use a thin layer of white glue for assembly. 1. Cut out carefully with an X-acto knife on solid lines. Be sure to cut the two black lines on the blue striped panel and solid black line between scaled and cheek panels. 2. Glue panels A-F in alphabetical order to form face. 3. Glue tab G to form underside of head. 4. Glue tabs H-K to continue forming body. 5. Place glue on tab L and on the back of bottom fin. Glue tab L inside at the same time as gluing the bottom fin front to back. 6. Place glue on tab M and on the back of top fin. Glue tab M inside at the same time as gluing the TOP FIN front to back. 7. Glue TAIL front to back. 8. Fold SMALL and LARGE FINS in half and glue front to back. 9. Insert SMALL FINS into rear slots on bottom of BODY. 10. Insert LARGE FINS into slots under cheeks. 11. Glue tab N to form stand. 12. Insert tabs on top of stand into slots on underside of BODY to display or hang fish from top fin by a thread. 13. Donate to collect all the Paper Koi designs. New designs will be added periodically. www.c3brandmarketing.com/paperkoi