Professional Documents
Culture Documents
Installing OpenOcd Rev.G Drivers For Windows 7
Installing OpenOcd Rev.G Drivers For Windows 7
Click on the first Olimex OpenOCD JTAG with the right button of the mouse and select Update
Driver Software...
After that the following window will appear:
Page 1
Page 2
Here select Have Disk... and at the next window select Browse... button to select ARM-USB-OCD
drivers directory (They should be on the disk for ARM-USB-OCD)
After you have locate your drivers directory select ftdibus.inf file and press Open button
Page 3
Here select OK
Page 4
Here select Install this driver software anyway and wait until the driver is installed.
Page 5
Here select Close and check in the Device Manager for the following:
Page 6
Page 7
Page 8
Page 9
Here select Close and check in the Device Manager for the following:
Page 10
Open Device Manager, click with the right button of the mouse at USB Serial Port and select Update
Driver Software
Page 11
Page 12
Page 13
Page 14
Here press OK
Page 15
Page 16
Page 17