LYSAGHT
LYSAGHT TRIMDEK®
Square Ribbed Steel Roof & Wall Cladding
LYSAGHT TRIMDEK isa trapezoidal ribbed.
profile with subtle fluting to the pans. Its bold
‘and widely spaced ribs give pleasing visual
affects. Its superior spanning capabilities,
‘economical effective cover make LYSAGHT
‘TRIMDEK an ideal and economical choice
for housing, commercial and industrial
applications
LYSAGHT TRIMDEK is also suitable for
carports, verandahs, fences and hordi
When used as wal cladding, hordings facades,
fences, the trapezoidal ribs can be run
vertically or horizontally.
LATEST TECHNOLOGY
‘State ofthe attesting methods have been used
to determine the performance of LYSAGHT
‘TRIMDEK. The Direct Pressure Testing Rig
at BHP Building Products’ NATA registered
testing laboratory has been used to develop
the limit state performance of the cladding.
offers a much
compared to
‘The Direct Pressure Test Ri
better modelling of wind load,
traditional air bag test methods.
SIMPLE, LOW COST FIXING
‘The long, straight lengths of LYSAGHT
‘TRIMDEK can be lowered into place and
easily aligned. Fixing is simple and fast.
ECONOMICAL CONSTRUCTION
‘The strength, spanning silty lightness and
rigidity of LYSAGHT TRIMDEK permits
twde support spacings to be used wit safer.
Referto te prln and git spacings sted on
page 5
CLEAN COLORBOND®
PREPAINTED STEEL
CLEAN COLORBOND Steel is the result of,
years of development by BHP Coated Steel
Zincalume steel is coated with zine /
aluminium alloy, resulting in sheets with the
strength of the steel, superior corrosion
resistance of aluminium, and the cut edge
protection of zine
@BHP
PT, Daliatex Kusuma, Bandung-Indonesia
First stage of producing CLEAN
COLORBOND js chemical conversion pre
treatment, followed by high technology oven
ccured primers and finish coats. The resultis a
deep durable coating which will not chip flake
or peel. CLEAN COLORBOND coating can
not be duplicated by post applied coatings and
many other propriety factory coatings.
CLEAN COLORBOND & TROPICAL
STAINING
Anyone who has experience building in
tropical countries would have noticed that dark
and uneven patches of dirt soon appear
after a new building is completed. This
recurting problem is called tropical. staining
or
BHP has developed a way to help your
buildings resist tropical staining. We call it
CLEAN COLORBOND pre-painted stecl.
‘Tropical Staining is caused mainly by the high
dirt and humidity levels found in tropical
countries.
These elements combine to cause dark and
uneven patches to appear on building
exteriors. These mark soon become permanent
because dirt and other airborne particles
literally bond themselves to a building's
surface, Tropical Staining affects all building
‘materials in tropical environments including
timber, concrete, aluminium , steel, glass and
ceramics, CLEAN COLORBOND steel is the
only exception