Professional Documents
Culture Documents
Readme en
Readme en
MSFree Inc.
System requirements:
VL editions: Windows Vista, 7, Windows 8, 8.1, 10, Server 2008, 2008 R2, 2012,
2012 R2, Office 2010/2013/2016.
Description:
Run KMSAuto Net.exe as administrator and use the interface. If you need addition
al
program features, enter into Professional Mode. The On/Off Professional Mode but
ton
is placed in the "About" Tab.
The easiest way to use the program is to pick the automatic mode. All you need t
o do is
click on the button if you want to activate and agree to create a scheduled task
for
reactivation by pressing the button.
Tip: First you need to activate Windows and Office in manual mode, and only then
,
when you are sure that the activation takes place, you can create a scheduled ta
sk for
reactivation products every 25 days.
If the system does not want to be activated in Professional Mode go to "Utilites
" and
manually set GVLK key for the proper Windows Edition, and then try to activate a
gain.
Additional Information:
To activate Windows 8.1 the TAP network adapter must be installed directly
and use the IP address 10.3.0.2-254 or use a special driver. All these features
are built into the program.
To activate via LAN, the TAP interface can't be used to install and
activate through an address of a computer in the network.
If you reconfigure the program and it stops operating correctly - check the chec
kbox
"Reset the program." All settings will be set by default.
/win=act
/off=act
/log=yes
/kmsset=yes
he program.
/kmsdel=yes
e program.
/key=yes
it
/task=yes
ndows and
/taskrun=yes
dows and
/convert=
version
- Run
and
- Run
and
- Run
and
- Run
l, win81wmc
After using this function, you need to restart your co
mputer.
/sound=yes
/sound=no
- Enable sounds.
- Disable sounds.
The activation will be done with the settings defined in the tab KMS-Service.
When you transfer the program to another computer, you need to reset the Auto Mo
de.
Activation would still be in automatic, but the mode may not be optimal
for your new computer.
To reset the auto mode to the initial state you need to switch to any other mode
,
and then again select auto. Everything is now reset to the initial state.
About how to activate the built-in program
The program can perform the activation with built-in KMS server Emulator in seve
ral
different ways. Why are there several of them?: the standard way to connect to t
he activation
server through the local host (127.0.0.2-254) was blocked in Windows 8.1.
All methods are intended for activation of something to cheat the system, do so
that it "thinks" that the KMS server is not on your computer, but somewhere far
away in the
network.
Auto
- the program tries to automatically find the way that best suits your
activation
system. Attempts are being made to activate the system or Office for all admissibl
ways your system has, and the one picked by the program it will be held to remembe
To reset to the initial mode, you can switch to any other mode and then select Aut
This mode is selected by default.
Hook
- method based on the substitution of the original file system changed
on a special way.
The new version of the method works without physically replacing the file.
WinDivert- in the system a driver is installed at the time of activation and it
keeps running
to emulate a remote connection to the KMS server.
NoAuto - In this mode, there is no automation, there is need to set the way it
will work.
Is intended for people who know better than me what, how and when to do and whethe
you want to do it or not. :)
TAP
- the system is a virtual device. TAP activation is done through this v
irtual device.
The program includes two drivers for the TAP adapter. If you already
installed one of
the drivers, the program will used the other driver to activate, resu
lting in your
current adapter left intact.
* Mode names on the System tab - clicking these links on which you can change so
me settings.
KMSSS.exe Options
KMS Log Analyzer.xlsm previous versions are incompatible with KMS Server Service
v1.1.7
Perhaps you have a non VL product, not intended for activation of KMS-Service, f
or instance
Windows 7 Ultimate can't support KMS activation, or your antivirus blocks the ac
tivation.
If an antivirus is the culprit you can do the following: in the "System" tab cli
ck on the
blue label "KMS-Service" and in the window that appears remove the check mark. T
hen add the
folder to exceptions in your antivirus program.
I want to say thank you mikmik38, without his work this program would be just im
possible.
To Hotbird64, for his KMS Client, Evgeny972 and guys from forum.ru-board.com for
making
possible assistance and testing of multiple versions of the program.
Ratiborus
Changelog:
v1.3.8
-Fixed: mapping display buttons when the font is enlarged to 125%.
-Added: Display the license expiration date (180 days 0 hours 0 minutes).
-Added in "Other utilities" restore system files from the disk with your
version/edition of Windows.
v1.3.7
-Fixed: Encoding readme_ru.txt.
-Added readme.txt in the Bulgarian language.
-Utility to save activation MSActBackUp v1.0.8.
v1.3.6
-Updated program ProduKey v1.70 to v1.80.
-Fixed: Setting keys for Office 2016.
-Fixed: The task in the scheduler runs every 10 days.
v1.3.5
-Updated ProduKey v1.66 to v1.70.
-New TAP driver to support Windows 10. A random IP address is used and when the
activation fails check box is cleared.
-Re-compiled KMS Service. So antivirus software will not detect it as threat/fa
lse positive.
-Included utility MSActBackUp.
-Added Keys for Windows 10 and Office 2016.
-Conversion from Office 2016 RETAIL to VL.
-To avoid detection from antivirus modules, driver files are password protected
.
Moreover, is imperative to add to exclusions the following folders:
%SYSTEMDRIVE%\ProgramData\KMSAuto\*.*
%SYSTEMDRIVE%\ProgramData\KMSAutoS\*.*
%TEMP%\KMSAuto\*.*
%TEMP%\PDK\*.*
v1.2.5
-When activation fails a message is displayed and an attempt is made to set
a GVLK forcibly.
-Added option to disable Task Scheduler which monitor user actions.
v1.2.4.1
-Fixed bug when working with command line parameters creating a scheduled task.
v1.2.4
-Activating in Auto mode starts using Windivert method.
-In the TAP method the TAP adapter is not re-installed.
v1.2.3
-Activation functions are optimized for Windows and Office.
-Fixed minor bugs.
-Changed the "Utilities" tab. Added "KMS Client by Hotbird64"
-New KMSSS.exe supporting installation Hwid KMS-Server.
v1.2.2
-Fixed date and time displayed in hexadecimal format in the log file.
v1.2.1
-Added the utility from ShowHideControls miXOnIN. To convert Systems Editions.
-In Professional Mode, Advanced tab, the button "Convert Office RETAIL to VL".
Runs on Windows 8-8.1, doesn't work on Windows 7!.
-New KMSSS.exe supporting installation Hwid KMS-Server.
v1.2.0
-Changed the "Settings" tab.
v1.1.9.b1
-Updated program for ProduKey v1.62 v1.65
-Added the choice of Activation intervals of 10 and 20 days.
-Installing GVLK Key at "Utilities" tab, works through slmgr.vbs.
-Changed setting keys function for "Unsupported Product" (so reports WMI OS).
-Added the program KMS Log Analyzer, for easy viewing and conservation of
information of the log file from KMS-Service. The computer must have installed
an application for working with files .xlsm (MS Excel). Not ready yet!
v1.1.7 v1.1.8
-Small changes in the program interface. Added a link to a video.
-In "Auto" mode the program starts searching for a solution with the correct IP
address.
-Fixed a rarely occurring bug related to the inability to delete files "Injecto
r by deagles".
Program could hang with the message "Installation Hook, Injector by deagles"
-Activation functions are optimized for Windows and Office.
-On the Utilities tab a button was added "Resetting the system is not valid."
Carefully read the message that appears when you click on this button!
v1.1.6