You are on page 1of 6

SYNOPSIS

MINOR PROJECT

LED PROPELLER (ROTATING) LED


DISPLAY

Submitted by :
ANKIT SAROHA (00714807814)
SANDEEP KR. PAL (0031480814)
PAWAN BAINSLA (30114807814)
BRANCH- EEE456

The whole arrangement is placed in a wheel


using foam plaster so the it sticks on both sides
the wheel is attached to 6mm shaft and
1000RPM metal gare motor.

I arranged the LEDs on a separate PCB and


connected them to the pinheads and an eight
pin female connector is used to connect the 8
LEDs to connect to PORT0 of AT89S52.
I used the KIEL software to program the
microcontroller. i prefer to work with C rather
than assembly. I am using a USB based
programmer to burn the AT89S52 MCU.

You might also like