Professional Documents
Culture Documents
WIRELESS
WX3024
Overview
Features
Managing 802.11n APs
The WX3000 series can be used to manage 802.11a/b/g APs. In
addition, it can be used with H3C 802.11n-based AP to provide
wireless access rates equivalent to six times the wireless access rates
provided by a conventional 802.11a/b/g network, enlarge coverage
and deploy wireless multimedia applications.
WX3000
Specifications
Hardware specifications
Item
WX3024
Dimensions (WDH)
Weight
Management port
1 console port
Service ports
Input voltage
AC:
Rated voltage: 100240 V AC, 50 Hz/60 Hz
Maximum voltage: 90264 V AC, 47 Hz / 63 Hz
DC:
Raged voltage: -52 V to -55 V DC
Maximum voltage: -36 V to -72 V DC
AC input: 450 W
25 W
0C45C
10%90%
Storage temperature
-40C70C
Storage humidity
5%95% (non-condensing)
WX3000
DC input: 670 W
Item
WX3024
Safety specifications
UL 60950-1
CAN/CSA C22.2 No 60950-1
IEC 60950-1
EN 60950-1/A11
AS/NZS 60950
EN 60825-1
EN 60825-2
FDA 21 CFR Subchapter J
EMC
MTBF
WX3024
88 Gbit/s
Port aggregation
VLAN
Route
DHCP
WX3000
Feature
WX3024
Multicast
MSTP
Supporting STP/RSTP/MSTP
Supporting 16 intra-area maximum spanning trees
Supporting STP Root Guard
Supporting BPDU Guard
QACL
Mirror
Security
802.1x
JUMBO frame
DLDP
POE
Supporting PoE+ remote power supply (for the 24-port switch; each port providing at most 25 W power)
Supporting RPS power supply
WX3000
Feature
WX3024
Management
Maintenance
Network security
WX3024
802.3 LAN
protocol
802.11 LAN
protocol
CAPWAP
protocol
Roaming
IP application
Ping, TraceRT, DHCP Server, DHCP Client, DHCP Relay, DHCP Snooping, DNS Client, NTP, Telnet, TFTP Client, FTP
Client, FTP Server
IP route
Static route
Multicast
IGMP Snooping
Security
authentication
AAA
Radius Client
HWTacacs
Supporting multi-domain configuration of the authentication server
Supporting the backup authentication server
Supporting authentication server selection based on ESS
Supporting the local Radius authentication server
Supporting the local portal authentication server
Supporting the binding of SSID and user account ID
WX3000
Feature
Network security
WX3024
802.11 security
and encryption
WIDS/WIPS
Others
SSH V1.5/2.0
Forwarding
RF management
QoS
Maintainability
Performance
indices
WX3000
Network
management
SNMP V1/V2/V3
WEB management
SYSLOG
User access
management
Baseline number
of APs that can
be managed
24
Maximum
number of APs
that can be
managed
License step
(Number of APs)
12
Switching capacity
1 Gbit/s
VLAN
4K
ACL
2K
Number of
wireless users
1K
MAC address
table
2K
4K
ARP table
1K
Switching time
in user roaming
< 50 ms
Networking Application
1. Mobile Network Solution Integrating Wired and Wireless Access for Small- and Medium-Sized Enterprises
The mobile network solution integrating wired and wireless access for
small- and medium-sized enterprises is the most typical application of
the WX3000 series integrated switch. At present, the WX3000 series
can be used only with H3C Fit AP series. The WX3000 series, serving
as the wireless data control and forwarding center, is placed in the
central equipment room or cabling room of an enterprise. The Fit APs
are placed in the ceilings, or mounted on the wall, or even installed
outdoors. As the WX3000 series supports PoE+ power supply (each
port provides at most 25 W power), in most cases it can be directly
connected with the Fit APs, no matter whether these APs are based
on the 802.11a/b/g protocol or the 802.11n protocol. The Fit APs and
the WX3000 switch can be located in the same network segment or
in different network segments. They automatically establish tunnels
with each other using the CAPWAP protocol. These tunnels are
based on UDP. They can cross an L3 network but cannot cross an
NAT network. Furthermore, the WX3000 switch provides Ethernet
electrical interfaces to supply power to portal computers, IP phones
and other terminals whose total power consumption is less than
25W. This spares the use of any terminal power adapter. Therefore,
the WX3000 series provides a simple and convenient mobile network
solution integrating wired and wireless access for small- and mediumsized enterprise customers.
The Fit APs and the WX3000 communicate with each other through
the CAPWAP protocol. A Fit AP obtains an IP address through the
DHCP server and can automatically bind its IP address with the
WX3000. The WX3000 provides auto management of the software
version of Fit APs. Network maintenance is thus easy and convenient.
Internet
L3 switch
SIP server
Router
WX3000
IP phone
L2 switch
AP
PC
Laptop
PC
PC
Mobile phone
PC
2. Mobile Network Solution Integrating Wired and Wireless Access for Branches of Large-Sized Enterprises
The mobile network solution integrating wired and wireless access
for branches of large-sized enterprises is another typical application
of the WX3000 series integrated switch. The WX3000 series
integrated switch can be used with the WX6100 large-capacity
integrated switch or the S7500E/S9500 series AC card to provide
a perfect solution for networking between the headquarters and
branches of a large-sized enterprise. The WX6100 series AC and
the S7500E/S9500 series AC card provide large capacity and high
processing performance. They support a large number of APs,
so that wireless signals can cover any place as needed. With this
solution, the headquarters of a large-sized enterprise can easily
construct a large-capacity wireless IT network as needed. In general,
the office area of each branch of a large-sized enterprise is not
large. The WX3000 series integrating wired gigabit switching,
wireless switching and PoE+ power supply functions is the best lowcost choice for wired and wireless access.
WA2110
PC
WA2110
WA2110
WA2110
PC
S3600
S3600
IMC
CAMS
S9500+
Dual-AC plug-in Card
Headquarters
DHCP server
WAN
Small branch
Local application
server
S7500E+AC
WX3024
Local DHCP
server
S3600
Integrated management
S3600
WA2110
Application
server
S5000
PC
WA2110
Large branch
WX3000
Order Information
Item
Specifications
Quantity
Remarks
WX3024
WX3024 integrated switch (if AC power supply is used, the input voltage range
is 100V to 240 V and the frequency is 50 Hz or 60Hz; if DC power supply is
used, the input voltage range is -52 V to -55 V)
Mandatory
LS51XP1P
1-port 10GE optical interface board (this interface board is an XFP interface
board and is not required if the XENPAK optical module is chosen; the XENPAK
optical module can be directly inserted into the host of the WX3024)
Optional
1000BASE-SX-SFP
04
Optional
1000BASE-LX-SFP
04
Optional
XFP-SX-MM850
02
Optional
XFP-LX-SM1310
02
Optional
XENPAK-SX-MM850
02
Optional
XENPAK-LX-SM1310
02
Optional
LIS-WX-12
License fee for the WX3000 series integrated switch-For managing 12 APs
02
Optional
WX3000
www.h3c.com