Professional Documents
Culture Documents
CIRCUIT DIAGRAMS:
PAGE NO:
Expt. No: 1
Date:
PSPICE SIMULATION OF SERIES RLC CIRCUITSFOR STEP, PULSE &
SINUSOIDAL INPUTS
AIM:To study the responses of series RLC circuits for a given step, pulse & sinusoidal
inputs.
SIMULATION TOOLS REQUIRED:PC with PSPICE Software
SPECIFICATIONS:
Step input: V1 = 0, T1 =0, V2 = 1V, T2 = 1ns, V3 = 1V, T3 = 1ms.
Pulse input: V1 = -10V, V2 = 10V, TD = TR = TF = 1ns, PW = 40us, PER = 80us.
Sinusoidal input: VOFF = 0V, VAMPL = 169.7V, FREQ = 50 Hz.
PAGE NO:
PROCEDURE:
1. Open the Orcad PSPICE.
2. Select Capture.
3. Open new project file from file menu.
4. Enter the name of the new file
5. Then Select analog or mixed A/D
6. Select create a blank project from project file.
7.Go to place on menu bar line that get all required parts and select a part and drop on new
file.
8. Draw the circuit diagram using wire.
9. Enter Ground potential at Zero value
10. Save the file.
11. Set the new simulation profile under PSPICE menu.
12. Enter the name where simulation results are required.
13. Select time domain analysis and set run time to a suitable value.
PAGE NO:
WAVEFORMS:
INPUT AND OUTPUT WAVEFORMS FOR SERIES RLC CIRCUIT WITH STEP
INPUT:
INPUT AND OUTPUT WAVEFORMS FOR SERIES RLC CIRCUIT WITH PULSE
INPUT:
PAGE NO:
RESULT: Hence studied the responses of series RLC circuits for a given step,pulse&
sinusoidal inputs
PAGE NO: