Professional Documents
Culture Documents
Revision 1.0
November, 2008
Revision Record
Revision
Date
Content
Owner
www.cermate.com
TND511-E0
Preface
This tech note introduces how to connect Siemens S7-300 MPI Port with PanelMaster
HMI.
MPI Port
<S7-300 CPU>
Create a new project follow below steps and set the CPU communication format.
Page 2 of 9
www.cermate.com
TND511-E0
Page 3 of 9
www.cermate.com
TND511-E0
<Insert a CPU unit into slot2, double it enter the properties window.>
Under CPU properties window, you can see the standard transmission rate is 187.5Kbps. Please use it
to link with PV series HMI directly.
Page 4 of 9
www.cermate.com
TND511-E0
485 +
485+
485 -
485-
SG
SG
HMI Side
485 TX+
485+
485 TX-
485-
SG
SG
Page 5 of 9
www.cermate.com
TND511-E0
Note:
We will suggest you the PLC and HMI address node do not set 0 or 1:
Node 0: reserve for PC / WinCC
Node 1: Step7 Software
2) HMI setting:
Select
Page 6 of 9
www.cermate.com
TND511-E0
Word Devices:
Page 7 of 9
www.cermate.com
TND511-E0
Page 8 of 9
www.cermate.com
TND511-E0
Cermate (Shenzhen) ()
Phone: +86-755-83572781, 755-83562179,
FAX : +86-755-83562294
E-mail: sales@cermate.com
sunny@cermate.com
Kevin@cermate.com
Linda@cermate.com
Page 9 of 9
www.cermate.com