Professional Documents
Culture Documents
Command
Command
Command: _line
Specify next point or [Undo]: 45
Command: _move 1 found
Specify base point or [Displacement] <Displacement>:
Command: _ellipse
Specify axis endpoint of ellipse or [Arc/Center/Isocircle]: i
Specify center of isocircle:
Specify radius of isocircle or [Diameter]: <Isoplane Left> <Isoplane Top> 65
Command: _trim
Current settings: Projection=UCS, Edge=None
Select objects or <select all>: 1 found
Select objects: 1 found, 2 total
Command: _copy 1 found
Current settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] <Displacement>:
Specify second point or [Array] <use first point as displacement>: <Isoplane
Right> 3
Command: _trim
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>: 1 found
Select objects: 1 found, 2 total
Select objects: 1 found, 3 total
Command: _line
Specify next point or [Undo]: 20
Command: _line
Specify next point or [Undo]: 30