Professional Documents
Culture Documents
Cause
Correction
Aisin AW 450-43LE
Oversized PR Valve,
Boost Valve &
Sleeve Kit
Lower Valve
Body
EQ
TOOL
UIRE
OE
Washer
Part No.
94987-11K
OE Pressure
Regulator
Valve Spring
OE
Retainer
Oversized Pressure
Regulator Valve
Tool Kit
Oversized Boost
Valve Assembly
Part No.
F-94987-TL11
Reamer
Reamer Jig
Guide Pin
Note: Sonnax F-Tool kits designed to
service a specific bore require the VB-FIX,
a self-aligning valve body reaming fixture.
More information and instructions can be
found online at www.sonnax.com.
Continuous movement of the pressure regulator valve wears the valve body bore in Aisin
AW 450-43LE units. Bore and/or valve wear causes erratic line pressure, resulting in delayed
engagements, loss of lockup and high or low line pressure, depending on the area and extent
of wear.
The boost assembly is designed to increase line pressure in Drive and Reverse. When the
sleeve is worn on the inside, boost or EPC fluids can leak to exhaust or cross leak and increase
forces on the valve. Leakage to exhaust reduces line rise. Cross leaks can result in broken
clutch drums or cases. The Sonnax oversized PR valve, boost valve and sleeve kit 94987-11K
restores hydraulic control to these circuits.
Features & Benefits
Both the Sonnax aluminum boost and pressure
regulator valves are hardcoat anodized to
reduce wear
20
15
10
25
0
30
VACUUM
TEST
14"-Hg
94987-11K09-24-12