Professional Documents
Culture Documents
Oil Separation 010
Oil Separation 010
SmartSkim
Vertical
Gravity Separator
SIDE VIEW
1. Separator column is 6 x 8 x 48 high
2. Pump and weir housing mounted on 8 side.
3. Oil discharge port is opposite inlet side connections.
Drawing below shows inlet side.
48
On installation,
maintain 48
overhead free
access for
periodic maintenance
of helical coalescer
6
Oil discharge
port on
opposite
side of that
shown.
1 1/2 f NPT
Pump
48
36
fluid discharge
to base
Allow 10 above
separator for inlet
pipe/hose fittings
Weir housing
Separator
Gravity Discharge
back to washer
1 1/2 f NPT
Separator inlet connection
from Suction Skimmer
3/4 f NPT
Baseplate dimensions and hole
pattern shown separately
Floor stand with fork truck stabs
is 24 x 24 x 4 high
1/2 NPT f
maintenance
discharge port
Customer supplies hose/pipe from skim head to separator and separator discharge back to washer.
All internal fluid connections come pre-piped.
Fluids are pumped through inlet connection via AOD pump and pumped into separator from above.
Clean treated fluids gravity discharge from base of weir box back to washer.