Professional Documents
Culture Documents
Lab 2 Circuit Design Buzzer
Lab 2 Circuit Design Buzzer
BUZZER CIRCUIT
Laboratory 2
[STUDENT NUMBER & STUDENT NAME]
DUE DATE
TOTAL MARKS
Plagiarism
The assignment is based on an individual response. The report must be completely your own work
and you must not copy from others. Any plagiarized work will be zero-rated. Any reference material
you use (books, journals, Internet, magazines etc.) must be clearly identified in your report using
procedures in the Harvard System of Referencing.
OBJECTIVES
Simplify the given Boolean expression and to realize it using basic logic gates and
universal gates.
LEARNING OUTCOMES
Upon completion of this experiment, students will be able to:
o
o
EQUIPMENT REQUIRED
PROCEDURES
Design a combinational logic circuit with a single output that will serve as an
auto buzzer circuit as shown in Figure 1. This circuit should output a HIGH
signal (to sound a buzzer) for each of the following conditions:
If the drivers door is open and the keys are in the ignition
If the seatbelt is not buckled, headlights are on, and the keys are in
the ignition
If the headlights are on and the keys are not in the ignition
Figure 1
i.
ii.
iii.
The End
Page 3 of 3