Professional Documents
Culture Documents
TOLERENCES For I Beam (General)
TOLERENCES For I Beam (General)
TOLERANCES
Phone: 814-623-8125
www.bedfordplastics.com
E-mail: frpsales@bedfordplastics.com
6/2007
SHAPE
SHAPE
DIMENSION
DIMENSION
TOLERANCE
TOLERANCE
%
Nominal
% of Nominal
**MAXIMUM
OR
MAXIMUM OR
MINIMUM
MINIMUM
TOLERANCES
TOLERANCES
thickness
tt== thickness
10%
0.010" min.
0.26mm min.
b = flange
flange width
width
5%
0.094" max.
2.4mm max.
d = depth
depth
5%
0.094" max.
2.4mm max.
t = thickness
thickness
10%
0.010" min.
0.26mm min.
b = flange
flange width
width
5%
0.094" max.
2.4mm max.
d = depth
depth
5%
0.094" max.
2.4mm max.
t = thickness
thickness
10%
0.010" min.
0.26mm min.
b = flange
flange width
width
5%
0.094" max.
2.4mm max.
d = depth
depth
5%
0.094" max.
2.4mm max.
t = thickness
thickness
10%
0.040" max.
1.02mm max.
3%
+0.094 max.
-0.187 min.
+2.4mm max.
-4.8mm min.
min.
ANGLES
ANGLES
CHANNELS
CHANNELS
BEAMS
BEAMS
FLATSHEET
SHEET
FLAT
b=
width
b=
width
*ENGLISH
METRIC
264 Reynoldsdale Road, Bedford, PA 15522-7401
Sales Fax: 814-623-6032
Phone: 814-623-8125
www.bedfordplastics.com
E-mail: frpsales@bedfordplastics.com
2 -1
6/2007
SHAPE
SHAPE
DIMENSION
DIMENSION
ROUND &&SQUARE
SQUARE
ROUND
TUBE
TUBE
t = thickness
thickness
OUTSIDE
OUTSIDE
DIMENSION
CONDITION
CONDITION
Under 1"
Under 25.4mm
1" and up 25.4mm
and up
Under 1"
Under 25.4mm
1" and up 25.4mm
and up
od = outside
outside
dimension
dimension
TOLERANCES
TOLERANCES
20%
15 %
0.020"
0.5mm
0.040"
1.0mm
ROUND ROD
ROD &
ROUND
SQUARE
BAR
SQUARE BAR
0.010"
0.26mm
Up to 3"
Up to 76.2mm
outside
od = outside
dimension
dimension
FLATNESS
Flatness is measured in the center with the weight of the profile minimizing the deviation
by contact with a flat surface.
STRUCTURAL SHAPES
SHAPES
STRUCTURAL
RODS, BARS,
& FLAT
BARS, &
SHEET
SHEET
Allowable deviation
deviation from flat
Allowable
flat
Width
All Thickness
Thickness
All
Up to 1"
Up to 25.4mm
0.008
.21mm
Over 1"
Over 25.4mm
0.008/in.
.21mm/mm
HOLLOW
SHAPES
HOLLOW SHAPES
Allowable deviation
deviation from flat
Allowable
flat
Width
Thickness
0.125" to 0.188"
3.18mm to 4.7mm
Up to 1"
Up to 25.4mm
0.012" /in.
.31mm
0.008/in.
.21mm
Over 1"
Over 25.4mm
0.012"/in.
.31mm/mm
0.008"/in.
.21mm/mm
Thickness
*ENGLISH
METRIC
264 Reynoldsdale Road, Bedford, PA 15522-7401
Sales Fax: 814-623-6032
Phone: 814-623-8125
www.bedfordplastics.com
E-mail: frpsales@bedfordplastics.com
2 -2
6/2007
STRAIGHTNESS
Straightness is measured in the center with the weight of the pultrustion minimizing the
deviation by contact with a flat surface.
ANGLE, BEAM
BEAM
AND CHANNEL
AND
CHANNEL
Allowable deviation
deviation from
from straight
Allowable
0.050/ft.
4.2mm/m
All widths
Allowabledeviation
deviation from
from straight
straight
Allowable
Diameter/Depth
ROUND, SQUARE,
SQUARE, AND
ROUND,
RECTANGULAR
RECTANGULAR TUBE
FLATSHEET
SHEET AND PLATE
FLAT
Per Meter
Up to 1"
Up to 25.4mm
0.020
1.7mm
Over 1"
Over 25.4mm
0.040
3.4mm
deviation from
from straight
Allowable deviation
Allowable
Diameter/Depth
Per Foot
Per Meter
Up to 2"
Up to 50.8mm
0.020
1.7mm
Over 2"
Over 50.8mm
0.030
2.5mm
All thickness
and widths
0.025/ft.
2.1mm/m
*ENGLISH
METRIC
Phone: 814-623-8125
www.bedfordplastics.com
E-mail: frpsales@bedfordplastics.com
2 -3
6/2007
TWIST
Twist is measured with the weight of the pultrusion minimizing the twist.
ALL PROFILES
ALL
PROFILES
Allowable twist
Allowable
twist
Up to 1.499"
Up to 38.1mm
Width/Depth
tan 1 x width
tan 1x width x 3.28
1.500" to 2.999"
38.10mm to 76.2mm
tan 7 x width
tan 5 x width
tan 3 x width
ANGULARITY
Allowable
from
specific
Allowable deviation
deviation from
specific
angleangle
ALL
ALLPROFILES
PRO FILES
Thickness up
up to
Thickness
to3/4
3/4"
Thickness
up
to
19mm
Thickness up to 19mm
Phone: 814-623-8125
www.bedfordplastics.com
E-mail: frpsales@bedfordplastics.com
2 -4
6/2007
CUT LENGTHS
ALL PROFILES
ALL
PROFILES
Allowable deviation
deviation from
specific
length
Allowable
from
specific
length
Up to 20'
6.10 meters
* All parts being cut from stock must allow for blade width.
SQUARENESS OF ENDCUT
Allowable deviation
deviation from
square
Allowable
from
square
ALL
ALLPROFILES
PROFILES
All thicknesses
*ENGLISH
METRIC
Phone: 814-623-8125
www.bedfordplastics.com
E-mail: frpsales@bedfordplastics.com
2 -5
6/2007