Cold Rolled Coil Cold Rolled Sheet
‘SPECIFICATION
APPLICATIONS
us ASTM BRITISH | DIN EN _[ASG-550 KS PT0270
uis@ai sece-sp | AST A366 8S 1449 CRA | DIN 1629 81 12[EN 101300C 01 JGR Carton steel sheet
41S G3141 SPCCTSD | {SAE or AISI 1008, nd tip com
1006, 1008 euaity
ussaar41 seco-sp |astmacre [8s 1449.0R3 | DIN 1609 9113 JEN 10130.0¢ 09] GR arber eel ote
ier) EN 10120 0¢ os rd ave eon
quay
astmaczo gs 1449.cRe| pin 1628 s1t4]EN 10190 0 os [CR Carton steel Sheet
DIN 1629 iF 18 JEN 10190 0¢ 08 and ip deep drawing|
uty
wis@-sa03 sea.va Jastmaces —— |asen sa20s lew 10205
ck Pate
IS 63183 SP
ASTM AADA-02
Asc 550
Freene housing
KS PTaz70DIMENSION
Dimension / Measurement and weight which mentioned in the tables below are actual dimension / measurement
‘and weight (not nominal or theorythical number)
1. Pickled & Oiled Hot Rolled Sheet
Thickness (mm) Width (mm) Diameter (mm) Weight (Tons)
Min, Max Min Max.” Min Max Min, Max.
1.80 6.00 600 1250 610 2000 10.0 23.4
1) For trimming order nominal of order thickness is < 5.00 mm
2) Maximum width for untrimmed sheet is 1300 mm.
2, Annealed Steel Sheet and Strip
Thickness (mm) Width (mm) Diameter (mm) Weight
Min. Max. Min Max. Min Max (tons)
0.20 02a 762 1000
0.25) 3.00" 655° 1250 508 2000 23.4
1) Maximum thickness for General Purpose (GP quay is 250 mm.
2} Calwth «800 mmcen be supplies n sie Som
3, Unannealed Stee! Sheet and Strip
Thickness (ram) Wath (em) Diameter (mm) Weight
Min Max Min Max Min Max {tons)
020 O24 762 1000
0.25) 2.00) 762" 1250 508 2000 23.4
“7 Ege condton”’ immed edge /alited edge foe thcknoss < 040 mm,
rill edge for hiekness > 0.40 mm,
4, Annealed Stee! Sheet
Thickness (mm) With (rm) Diameter (mm) Weight
Min, Max. Min, Max Min Max un)
0.40) 2.00 565 1250 762 4880 3.00
5. As Rolled
Thickness (mm) ‘Wit (mm) Diameter (mm) Weight max
Min. Max. Min, Max Min. Max O78)
20 024 762 +000
025) 2.00 762 +1250 508 2000 23.4AVAILABLE SIZE RANGE
Thickness
(men)
*
(6.00,800) we (6.00,1300)
6.00
a
—+ tio! Rotloa
Pickled ilar
350
(3.00,585), ae (3.00,1300)
3.00
DAT) (250,130)
250
(200,762) (2.00,1300)
2.00
(1.80,600) (4.80,1800)”
1.50
catia eae I—> FullHard & AS Rolled
= nainnec
4.00
> Commercial Qual (scft)
« (0.40,762} (0.25, 1000) (0.40,1300)
050 ( | = a
(0.30565) 7 }
6 (0.24 1000)
(0.20,762)_->' SRB) 00.24,1800) wan
° ic
500 1000 1500 (mm)