With a total surface flow area of
79.44 in'—a 1,200% increase over
the largest conventional single-probe
formation tester—the Saturn 3D
radial probe extends formation testing
to previously inaccessible fuids and
reservoir environments:
‘= low-permeability formations
= heavy oil
= unconsolidated formations
= near-critical duids
= mugose boreholes.
‘The Saturn 3D radial probe can
perform pressure tests efficiently and
conclusively at, mobilities as low as
0.01 mDyeP. With minimal storage
volume effects and greatly reduced
susceptibility to supercharging, the
Satur probe brings unprecedented
pressure-testing capability to very
tight formations.
‘The drain assembly of the Saturn
8D radial probe positions four self
sealing suction ports at 90° intervals
against the borehole wall to pull fd
circumferentially from the reservoir,
instead of fimneling it to the single
access point of a conventional probe.
Because fluid is extracted actoss a
large reservoir volume, flow is read-
ily induced and sustained for viscous
fluids and in low-mobility formations
‘or uncemented matrix, Filtrate is
quickly removed to draw in uncontam-
inated formation fluid for downhole
fluid analysis (DFA) and sampling
Formation Testing and Sa
Schlumberger
Saturn
3D Radial Probe
‘The improvement in testing off-
ciency over conventional probes is dis-
tinct at mobilities of 500 mD/eP, with
the performance gap expanding as the
mobility decreases. At 10 mD/cP the
Saturn probe isan enabling technology
because even an extralarge-diameter
conventional probe ean be challenged
‘to move the formation fuid
‘The proprietary rubber technology
used in the probe assembly provides
additional flexibility for sealing in
rrugose hole conditions in combination
with the probe's selfscaling suction
ports. The probe assembly also cit-
ccumferentially supports the formation
to enable sampling in unconsolidated
formations without the risk of plugging
or formation collapse.
Applications
= Formation fluid sampling
= Downhole fluid analysis
1 Formation pressure measurement
= Fluid-gradient determination
1 Farield permeability
‘measurement and anisotropy
determination
= Well testing design optimization
Back | Main Menu | Contents | Search | Next
usSchlumberger
Measurement Specifications
Saturn Probe
Duipat
Uivalow-contaminatio frmation fds, formation pressure, uid mobil,
downhole id analysis, pormeabiltyanisotopy
Legging speed?
Stationary
ange of measurement
‘Gauges spoiled for the operation and formation conditions
Resolton
‘Gauges speifid for the operation and formation conditions
‘Recuraey
‘Gauges specified for the aperation and frmation conditions
Mua type or weight Intations
Combinaitiy
Fully integrates with MDT modular formation dymariestostor
al nSity Family" measurements sensors
Special applications
Tow-pormeability formations, heay al, nearatal Wud,
unconsolidated foritions nd rgose boreholes
Mechanical Specifications
‘Saturn Probe
Temperature rating
360 deg [17 deat]
Pressure rating
70:00 psi [738 MPa
High-pressure version: 25000 psi 172 MPa)
Utvahigh eessure version: 30,000 psi (207 MPa)
Borehale sae—min
Tin version: 77m [20.0 cm
{in version 4 in (25.08 em]
Borehole sue— max
in version Yn (24.18 em
Sin version 145 in [96.83 om]
Max hale ovalty
20%
Dutsde diameter
Tool body 475 1 [1208 em]
“Lin version drain assembly 7 n [17.78 cm]
Sin version drain assembly: 8.75 in [22.23 em]
inate S714
Wit Modular ReserirSonde and Electronics (MASE: 124 f[.78m)
Weight “in vrsion 385 ly [175k]
in vrson: 85 a [20 kg)
Tension Deponds on wollore pressure and temperature
Compression Depends on wellbore pressure and temperature
es aes ana
10
Back | Main Menu | Contents | Search | Next
Wireine Services Catalog