Professional Documents
Culture Documents
Figure 1
OR
30 marks
Practical Examination
Subject: Geometric Modeling
Time: 2.00 Hrs
Marks: 50
Class: S.E. (Mechanical)
Examination Seat No:
_______________________________________________________________________
Instructions:
1 Using suitable geometric modeling software solve the questions.
2 Take printout for question number 1 & 2.
3 Submit attached (a) Question paper (b) printout pages to the supervisor.
4 Write Examination seat number in printout page as well
_______________________________________________________________________
Q1 Create the model as per the dimensions given in following figure 1.
Figure 1
OR
30 marks
Practical Examination
Subject: Geometric Modeling
Time: 2.00 Hrs
Marks: 50
Class: S.E. (Mechanical)
Examination Seat No:
_______________________________________________________________________
Instructions:
1 Using suitable geometric modeling software solve the questions.
2 Take printout for question number 1 & 2.
3 Submit attached (a) Question paper (b) printout pages to the supervisor.
4 Write Examination seat number in printout page as well
Q1 Create the model as per the dimensions given in following figure 1.
Figure 1
OR
30 marks
Practical Examination
Subject: Geometric Modeling
Time: 2.00 Hrs
Marks: 50
Class: S.E. (Mechanical)
Examination Seat No:
_______________________________________________________________________
Instructions:
5 Using suitable geometric modeling software solve the questions.
6 Take printout for question number 1 & 2.
7 Submit attached (a) Question paper (b) printout pages to the supervisor.
8 Write Examination seat number in printout page as well
_______________________________________________________________________
Q1 Create the model as per the dimensions given in following figure 1.
Figure 1
OR
30 marks
Practical Examination
Subject: Geometric Modeling
Time: 2.00 Hrs
Marks: 50
Class: S.E. (Mechanical)
Examination Seat No:
_______________________________________________________________________
Instructions:
9 Using suitable geometric modeling software solve the questions.
10 Take printout for question number 1 & 2.
11 Submit attached (a) Question paper (b) printout pages to the supervisor.
12 Write Examination seat number in printout page as well
_______________________________________________________________________
Q1 Create the model as per the dimensions given in following figure 1.
Figure 1
30 marks
OR
Practical Examination
Subject: Geometric Modeling
Time: 2.00 Hrs
Marks: 50
Class: S.E. (Mechanical)
Examination Seat No:
_______________________________________________________________________
Instructions:
13 Using suitable geometric modeling software solve the questions.
14 Take printout for question number 1 & 2.
15 Submit attached (a) Question paper (b) printout pages to the supervisor.
16 Write Examination seat number in printout page as well
_______________________________________________________________________
Q1 Create the model as per the dimensions given in following figure 1.
Figure 1
30 marks
OR
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
Q1 Create the model as per the dimensions given
in
following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly
using suitable constrains.
20 marks
Figure 3