Professional Documents
Culture Documents
Surface Protection
Works standard
CN
04 0102
Annex 2
Material characteristics
No particular specifications are laid down with regard to the composition. The sele ction of the product as well as
the process parameters must be such that a uniform and compact-grained coating with a basis weight of approx.
10g/m is produced. The phosphate coating must finally be sealed with an oil emulsion.
Film properties
3.1 Appearance
Good adhesive, grey to black coatings; free from faults.
After final treatment with the oil emulsion the coating must be dry to the touch and must not be sticky or oily.
The surface itself must have a matt appearance.
3.2 Coating thickness
The coating weight must not exceed 12g/m . A max. coating thickness of 6 m must be ensured for tight-fitting
parts.
4
Anti-corrosion data
(After treatment with oil emulsion)
Salt spray test
DIN 50021-SS
72 hours
perfect
6 months
Harsewinkel
perfect
Revision
PV-Standardization
Date: 20. 3.1998
CLAAS Mnsterstrae 33 D-33428 Harsewinkel
Copyright CLAAS
Name: Mielke/Richter
Page
1/1