Professional Documents
Culture Documents
A104a
Description
Specifications
Materials
Filter Capsule
Allows for quick and safe filter changeouts, and easy maintenance.
In-line flow design minimizes dead space
Capsule design prevents incorrect
orientation and installation
Connection nozzles designed for simple
change-out and easy maintenance
Ease of use sharply reduces down-time
Minimizes operator exposure to solvents
Profile Star depth filter media is
especially suited for the removal of gels,
aggregates and oversize particles
Available in nominal 130 mm (5 in.) and
260 mm (10 in.) length cartridges
suitable for most applications
Broad choice of connection sizes
Head Manifold
Frame: FEP coated SUS 304
Connections (removal nozzles): PTFE
Connections
Inlet/Outlet:
10 mm Swagelok1 compatible
8 mm Swagelok compatible
3
4 Swagelok compatible
3
8 Swagelok compatible
Vent/Drain:
8 mm Swagelok compatible
6 mm Swagelok compatible
1
4 Swagelok compatible
Removal Ratings
1.5 m, 3.5 m, 5 m
Operating Conditions
Maximum Operating Temperature: 30C
Maximum Operating Pressure:
0.19 MPa @ 30C
100
TEY05A015
TEY05A030
TEY05A050
TEY10A015
80
60
TEY10A030
TEY10A050
40
20
0
4
10
12
For liquids with viscosity differing from water, multiply the pressure drop by the
viscosity in centipoise.
Dimensions3
Head Manifold
Filter Capsule
157 mm
PALL
VENT
OUTLET
Pall Corp
P/N:
Klee
135 mm
FLOW DIRECTION
In-Lin
Maximum
2 bar g/29
Maximum
2 bar/29 p
220 mm / 343 mm
337 mm / 460 mm
Maximum
30C/86F
Important:
See service
DRAIN
INLET
Filtration. Se
86 mm
3
O-Ring Material
TEY05A015J
TEY05A030J
TEY05A050J
TEY05A015H23
TEY05A030H23
TEY05A050H23
TEY1A015J
TEY1A030J
TEY1A050J
TEY1A015H23
TEY1A030H23
TEY1A050H23
1.5
3
5
1.5
3
5
1.5
3
5
1.5
3
5
EPDM
EPDM
EPDM
Perfluoroelastomer
Perfluoroelastomer
Perfluoroelastomer
EPDM
EPDM
EPDM
Perfluoroelastomer
Perfluoroelastomer
Perfluoroelastomer
130
130
130
130
130
130
260
260
260
260
260
260
Dummy Capsule
Part Number
TEY05000J
TEY1000J
5
5
5
5
5
5
10
10
10
10
10
10
Size (mm)
Head Manifold
Part Number Cartridge Size (mm)
Length (mm)
Width (mm)
Depth (mm)
220
343
TEH05SF2
TEH1SF2
337
460
135
135
157
157
Connections4
Part Number
Inlet/Outlet
F-TE-SW10M-SET
10 mm Swagelok Compatable
F-TE-SW8M-SET
F-TE-SW12-SET
F-TE-SW6-SET
8 mm Swagelok Compatible
3
4 Swagelok Compatible
3
8 Swagelok Compatible
130
260
Vent/Drain
F-TEV-SW8M SET
F-TEV-SW6MSET
F-TEV-SW4 SET
4
/
/
/
/
/
/
/
/
/
/
/
/
8 mm Swagelok Compatible
6 mm Swagelok Compatible
1
4 Swagelok Compatible
Connections are not installed on the manifold. They need to be ordered separately.
One set of connections contain two pairs of nozzles: for inlet /outlet and for vent/drain.
A104a
, IonKleen is a trademark of Pall Corporation. Indicates a Pall trademark registered in the USA.
is a service mark of Pall Corporation.
11/13