ROM ACI-Bullder Ver: 5.1.0.0
Project No: ane
Project Name: ae
‘Job Title: B3_BESIDE STAIRS.
Cols by: #88 Checkedby: __###
Reinforced Concrete Members ACI-Builder [=.= ——r Dote: nor 2016
Calculation of Crack Width According to ACI 224R-01
Transformed Section
+
nAst / t
es tex act
« fe
=—S— Steainn Stress-Forces
2xat: Depth of concrete in tension zone
Material Properties:
fo=32 Ma concrete compressive strength
fy = 201 Bending Reinforcement vid strength
Reif. medius of easticty
Denaty of normal-weight conrste
Ec = 4700 * sqrti('c) = 3059.43 MPa Concrete modulus of elasticity’
mes | €c= 85081 Modular Reto
Section Properties:
Section breadth
Section height
Cover to center of ccmpression bars
Cover to center of tension bars
Effective depth
bars Number of tension bers
2 mn Diameter of tension bar
Sram Bar spacing cfc
Ast = 8732 = 6433.98 mm2 Area of tension steel
Compression reinforcement:
nc =3 bars umber of compression bars
de = 25 mn Diameter oF comroression bar
Asc = 3125 = 1472.62 mm rea of compression stee!
Applied service moment:
Ma =718 Him Applied Flexural service mement
Section Properties at Cracking Stage:
b= Blnast) = 0.00047
= [o-tyraseyfin ct] ~ 0.19402
C= sqrt (2 d.b(1 tr acid 4f14r}-2)14) Ht
305.27 mam Neutral axis depth
Mement lever arm
l= GHz Mement of inertia of ross concrete section
(B.C"3/9)4n.Ast(dC)Z]4[(r-1)Asc(C-ac)“Z] = 14438606492.35 mm4 Moment of inertia of cracked concrete section
fr = 62*sayt(Fe) — 4.02 MPa Concrete modulus of rupture
er = Gi*Ig}(H2) = 216.98 kim Cracking moment
ROM ACT-Builder (Reinforced Concrete Members ACI-Builder) Developed by: Eng. Hussein RidaROM ACI-Bullder Ver: 5.1.0.0
Project No: ane
Project Name: ae
‘Job Title: B3_BESIDE STAIRS.
Caksby: ae Gheckedby:
Reinforced Concrete Members ACI-Builder [=.= of Date: ‘07 2016
Calculation of Crack Width According to ACI 224R-01
Stress-Strain compatibility analysis characteristics:
Ma * (4-0) Ter = Ma j (Ast #2) = 159.91 MPa = 0.381 Fy Steel tensile stress at service loadlevel
la Cf fer = 15,18 NPa = 0,981 Fe ‘Concrete conpressive stress at service load level
Calculacte of Crack Wid
CLL e-3* PEs ia" at)%(H/3) = 0.221 mm Crack Width (Geraely-Lute Formule)
Stoel tensile strace at service load love
Depth factor
Thickness of caver ta the center ofthe Fstlayer of tension steel bars
at =210 nm Depth of the concrete areain tension zane determined by having
the center of gravity o tension steel bas as the centriod ofthe concrete area in tension
n= @ bars Number af steel bors a tendon sde
(BFE) {nt = 10509 mm ‘ea of concrete in tension zone devided by the number of tension bars
Check of maximum allowable crack width:
Exposure condition: Humidity, moist air, soil ACI 224R-01 Table:4.1
Werkinax) = 0.3 mm Macmun crack wicth for selected exposure condtion
Werk =0,221 mn < Werk-max = 0.3mm 0K
Check of maximum allowable steel stress:
f-mac= 170 MPa Macimun allowable sted stress - User Defined
fs = 199.91 MPe < Femax= 170 MPa OK
check of maximum bar diameter for highbond bars:
fs = 159.91 MP2