ROM ACI-Bullder Ver: 5.1.0.0
Project No: ane
Project Name: ee
‘Job Title: RAMP_BEAM_1
107 2016,
Calculation of Crack Width According to ACI 224R-01
Transformed Section
+
nAst / t
es tex act
« fe
=—S— Steainn Stress-Forces
2xat: Depth of concrete in tension zone
Material Properties:
f= 50 Ma concrete compressive strength
fy =<201e Bending Reinforcement vid strength
Reif. medius of easticty
Denaty of normal-weight conrste
Ec = 4700 * sqrti(f'c) = 3234.02 MPa Concrete modulus of elasticity’
mes | €c= 9.8287 Modular Reto
Section Properties:
Section breadth
Section height
Cover to center of ccmpression bars
Cover to center of tension bars
Effective depth
Number of tension bers
Diameter of tension bar
Bar spacing cfc
Ast = 10722 = 6042.48 mm2 rea of tension steel
Compression reinforcement:
nic =8 bars umber of compression bars
de = 25 mn Diameter oF comroression bar
Asc =8T25 = 3926.93 mm rea of compression stee!
Applied service moment:
Ma = 1016 km Applied Flexural service mement
Section Properties at Cracking Stage:
b= Blntast) = 0.00710
= [o-tyraseyfin ct] ~ 0.49757
C= sqrt (2d. BCL acfel [LH 2)(142)}b = 349,78 mm Neutral axis depth
Mement lever arm
Ja = GHG) 12 = 45693609933,33 m4 Mement of inertia of ross concrete section
(B.C"3/9)4[n.Ast(dC)°Z]4{(r-1)Asc(C-ac)“Z] = $3665109910.43 mm Moment of inertia of cracked concrete section
fr = 62*eart(Fe) — 4.38 MPa Concrete modulus of rupture
Her = G*Ig)/(H2) = 401.87 kim Cracking moment
ROM ACT-Builder (Reinforced Concrete Members ACI-Builder) Developed by: Eng. Hussein RidaROM ACI-Bullder Ver: 5.1.0.0
Project No: ane
Project Name: ee
‘Job Title: RAMP_BEAM_1
Caksby: ae Checkedby:
Reinforced Concrete Members ACI-Builder [=.= of Date: ‘oy 2016
Calculation of Crack Width According to ACI 224R-01
Stress-Strain compatibility analysis characteristics:
Mla * (d-C) Ir = Ma (ast * 2) = 159.9 MPa = 0.381 Fy Steel tensile stress at service loadlevel
la C {ler = 10,56 NPa=0.211 Fe ‘Concrete conpressive stress at service load level
Calculacte of Crack Wid
LL *1e-3 PES ia at)
285mm Crack Width (Gergey-Lute Formule)
Stoel tensile strace at service load love
Depth factor
Thickness of caver ta the center ofthe Fstlayer of tension steel bars
at =200nm Depth of the concrete areain tension zane determined by having
the center of gravity o tension steel bas as the centriod ofthe concrete area in tension
n= 10 bars Number af steel bors a tendon sde
(FE) {nk = 11009 mma ‘ea of concrete in tension zone devided by the number of tension bars
Check of maximum allowable crack width:
Exposure condition: Humidity, moist air, soil ACI 224R-01 Table:4.1
Werkinax) = 0.3 mm Macmun crack wicth for selected exposure condtion
Werk = 0,215 mn < Werk-nax = 0.3mm 0K
Check of maximum allowable steel stress:
fs-mac= 170 MPa Macimun allowable sted stress - User Defined
fs = 199.9MPa < Ferman = 170MPa OK
check of maximum bar diameter for highbond bars:
fs = 159.9MPa < Fs-cantral = 160 MPa, therefore:
de =32 nm