Professional Documents
Culture Documents
The rectifier circuit shown in Fig. 1 has an ac source voltage of 240 V input at 60 Hz.
The R-L load has R = 10 and L = 100 mH. You may change the transformer to any
other workable transformer.
(i)
(ii)
(iii)
(iv)
(b) the average and rms values of a diode voltage, I am using V(D2-1)
(v)
(vi)
(d) the average and rms values of a diode current, using D2 diode
(vii)
(viii)
(ix)
(x)
(xi)
(xii)
(b) the input voltages vac1 and vac2 using the same time-axis,
(xiii)
(c) the diode voltages vD1 and vD6 using the same time-axis.
(xiv)
(d) the input currents i ac1, iac2, and output current i an using the same
time-axis, and
(xv)
(e) the diode currents i D3, i D5, i Dm, and i Dn using the same time-axis.
Show the input file and all the necessary output waveforms. Also include SPICE
diagram in the final report.