Since 1992...
NISIKI INDIA PRIVATE LIMITED
a
NISIKI
xi kear)
ISO 9001:2000
BRAND with VALUES
* Zero PPM * Sincerity
* Low Prices * Transparency
* JIT Delivery * Honesty
in Products in Services
AC AXIAL FANS
ENDUSERS @ LOWEST COST
...Growing with the brand.
Visit us at - http://www.nisiki.netNISIKI ‘
AC AXIAL FAN NIS8025 Series
Characteristic Curves
General Specifications
Frame ; Die-casting ade12 Aluminium Alloy. Surface is finished Motor Structure ; Shaded pole motor with inner rator running
by black paint, anti corrosion, anti oxidization, Allowable ambient temp. range :-20°C~+70°C (Ball Bearing)
Impeller : Made by injection mould with black plastic, 10°C~+45°C (Sleeve Bearing)
PBT 30% glass fibres VO class of ant:burning liquid. Insulation resistance ; Over 100Mega ohm tested by a resistor st 1C500V.
NMB Ball Bearing (Sleeve bearing is optional) Dielectric withstanding voltage : ACI,800V at 0.5mA, 50/60Fz
Connection ; UL3266 Lead wire (terminal connection) _ Insulation grade :B, Protection grade : IP54
Life: 60,000 hes at 25°C (Ball Brg), 28,000 hrs at 25°C (Sleeve Brg.)
Unie weight = 0.225 ky
Frequency Misc AirFlow 1 Nine sinc | None
He vor [erat | math | PrewuretPa) | cB)
Ne
ised
iseo2sLet
Niss025He1
I 2
ISHN25LE2
NISBORSHER,
i {Al Kind of technical parameter ae cloted with ting states andl covronmen, spe
sDyrceon of Air CCW scem om the ontop
ao202
715202
In
Visit us at - http://www.nisiki.netNISIKI ‘
AC AXIAL FAN NIS9225 Series
Flowing rate:
Material General Specifications
Frame ; Die-casting adet2 Aluminium Alloy. Surface is finished Motor Structure ; Shaded pole motor with inner rator running
by black paint, anti corrosion, anti oxidization, Allowable ambient temp. range :-20°C-+70"C (Ball Bearing)
Impeller Made by injection mould with black plastic, 10"C~=454C (Sleeve Bearing)
PBT 30% glass fibres VO class of ant:burning liquid, Insulation resistance ; Over 100Mega ohm tested by a resistor st )C500V.
Beating : NMB Ball Bearing (Sleeve bearing is optional Dicleceric withstanding voltage : ACI, SOOV at 0.5m, 50/601 lz
Power Connection : UL3266 Lead wire (termiaal connection) _Insulation grade : B, Protection grade «IPS
Life : 60,000 hrs at 25°C Ball Brg.), 28,000 hrs at 25°C. (Sleeve Brg.)
Unie weight - 0.260 ky
Specifications :
Voltage | Frequency | Gurrene Mac AeTow The Saue | Nowe
= mm | cEM Presure?s) | (8)
Type
nusoz2sus1
NSe226HS2
Nuse226L82
Nuse226h
‘AT ed of techn parameter ar relate wih stig sate and envionment, samples
Outline women foe sun ein eth es el oon
section of Ar CCW sen ftom the ont impels
2620,
35202
a
Visit us at - http://www.nisiki.netNISIKI i
AC AXIAL FAN NIS12025 Series
Characteristic Curves Model
Flowing rate: 9
Material
Frame ; Die-casting adet2 Aluminium Alloy. Sutface is finished,
by black paint. anti corrosion, anti oxidization
Impeller Made by injection mould with black plastic,
PBT 30% glass fibre VO lass of ant-burning liquid
Bearing : NMB Ball Bearing (Sleeve bearing is optional)
Power Connection ; UL3266 Lead wire tion grade :IPS4
'C (Ball Brg.) 28,000 hes at 25°C.
Unie weight 0.350 ky
Specifications :
Nasr2026ust
hist 2026451
Visit us at - http://www.nisiki.netUy store
| Characteristic Curves
I
Material General Specifications
Frame : Die-casting ade12 Aluminium Alloy. Surface is finished Motor Structure : Shaded pole motor with inner rotor running
by black paint. anti corrosion, anti oxidization. Allowable ambient temp. range :-20°C-+70°C (with Ball Bearing)
Impeller : Made by injection mould with black plastic, Insulation resistance ; Over 100Mega ohm tested by a resistor atD)C500V.
PBT 30% glass fbre+ VO class of anti-burning liquid, Dielectric withstanding voltage ; ACI, 800V at 0.5mA, s0/60Hz
Bearing : NMB Ball Bearing Insulation grade :B, Protection grade IP
Power Connection : UL3266 Lead wire (terminal connection) _No. of Blades : 7, No. of Poles : 2
Life: 60,000 he at 25°C
Spec Unit weighe 0.510
Specifications : eee
Voltage
VAC
Frequency | Airflow | Speed | Power | Current | Noise
He crm | rpm |W | Amps. | (aby | Prssure
Voltage
Taring Max State |
VAC Gin-420)
Outline
Visit us at - http://www.nisiki.netNISIKI i
AC AXIAL FAN NIS15051 Series
| Characteristic Curves | Model
I T
&
8
&
Static pressure A pf
lowing rate: v
Material General Specifications
Alloy. Surface is finished Motor Structure : Shaded pole motor with inner rotor
Allowable ambient temp. range :-20°C-+70°C (Ball Bearing)
lade by injection mould with black plastic, Insulation resist ohm tested by 8 resistor at CS00V.
PBT+ 30% glass fibre VO lass of ant-burning liquid ianding voltage : ACI,S00V at 0.5mA, 50/60
Bearing : NMB Hall Bearing (Sleeve bearing is optional) Insulation grade :B, Protection grade : IPS4
Power Connection : UL3266 Lead wire (terminal connection) Life - 60,000 brs at 25°C (Ball Brg.
Unit weight : 0.895 ke
Specifications :
Valige | Fequency] Gavet | ome? | Speed | Na AFiow Tye guac | Nowe
v +H: ‘Amp. |X ‘pm CPM M3/h | Pressure(Pa) | (dB)
Type
NIS15051L81
NIStS051HE1
NISt5051L82
Nists051He2
Outline {And of echnical cr ates and enrronnent,samoks
orem re goto oth} ac nl toed fo compas,
Deion ofr CC
Visit us at - http://www.nisiki.netNISIKI i
AC AXIAL FAN NIS17051 Series
| Characteristic Curves
Flowing rate: v
Material
Alloy. Suface is finished
by black paint. anti corrosion, anti oxidization ent temp. range :-20°C-+70°C (Ball Bearing)
Impeller : Made by injection mould with black plastic, 3 ohm tested by 8 resistor at CS00V.
PBT+ 30% glass fibre VO lass of ant-burning liquid ianding voltage : ACI,S00V at 0.5mA, 50/60
Bearing : NMB Hall Bearing (Sleeve bearing is optional) B, Protection grade [P54
Power Connection : UL3266 Lead wire (terminal connection) Life - 60,000 brs at 25°C (Ball Brg.
Unit weight : 0.080 kg
Specifications :
Voltage | Frequency | Currene | Power | Speed [Max Airflow 1 wi static | Noise
i Vv 5 | mm | cl Pressure(Pa)
Nist7051L81
eros fee 8
so [018 2400 13s
60017 3700 130)
co [017 3000 D 180)
NIS17051L82
NiStTO51HE2
Outline {Alki of echnical cr ates and environment, samoks
orem re goto oth} ac nl toed fo compas,
Drei fr
sit02
2sto2l L2se02
9172.440.2
BX 04.3402
Visit us at - http://www.nisiki.netNISIKI i
AC AXIAL FAN NIS23065 Series
| Characteristic Curves
I
wrenieoy en)
Flowing rate: ¥
Material
Frame : Die-casting AZ91D Magnesium Alloy. Surface is finshed | Motor Structure: Sin
black paint, anti corrosion, anti oxidization Motor Protection : Ultra
Impeller. Made by injection mould with black plastic
PBT-+ 30% glass fbre+ VO class of anci-burning liquid, Allowable ambient «
Beating : NMB Ball Bearing
Power Connection ; PA-10 terminal connection Dielectric withstanding voltage : AC 2000V at 0.5mA, 50/60Hz
Insulation grade : F, Protection grade: IP54
Life: 60,000 hrs at 25°C, 30,000 hrs at 45°C (Ball Br)
Specifications : Unit weight: 1.810 ky
Speed [Mis AirFlow [stor State a
tom | CEM | Mam | Press(Pa) | (4B) db
Nis23065LB1 ss_{ 3000 [270 [ eo | too
/e5HE zaco [aus [70 [20
Voltage
Type ve
3/250
12/500
Nis23065LB2 | 7 5 3a] -3350_| 401 [680 _| 110
53 | 2400 | 443 | 750
2530 [472 | 900 |
Nis2so6sHE2
Outline {AIT kn of echnical cr ater and eorkonment saps
poramcter are got fo s0 they ate only used for compaison
{Direction af Air CCA
Visit us at - http://www.nisiki.netNISIKI ;
AC AXIAL FAN NIS12038M Series
| Characteristic Curves
I
trent)
Flowing rate: ¥
Material
Frame : Die-casting ade12 Alumni
welded to motor rotor directly, Surface treatment by anti
corrosion grey paint Dielectric withstanding voltage : AC 1,800V at 0.5mA, 50/60Hz
Dearing : NMB Ball Resting Insulation grade F, Protection grade : P54
Power Connection * UL3366 lead connecton(erainal conection) Life: 80,000 ns a 43°C, 45,000 bs at 60°C (Bal Br)
See Unit weight 0.540 ke
Specifications :
f Teequeney | Curent | PO ] Speck | BEEARFION TNs sane | Nowe
_ v
Voltage
v
‘Type
‘Amp. rpm | CIM | Mah | Prescure(Ps) | (dB)
o3r_| 25 | 9300 | 9.6 | 140 7 36
[oars [30 [2400 -[— 100 | 170. To | 40
017 7_[-a600 | 95 | 140. 00 29
Nist2038MLB"
NIS12038MHBt
AIT kind of techni crcl tes and environment, samples
poramcter are got fo s0 they ate only used for compaison
{Direction af Air CCA
Visit us at - http://www.nisiki.netNISIKI
AC AXIAL FAN NIS17255HB2
| Characteristic Curves
Material General Specifications
Frame : Die-Cast Aluminium, treated with anti-corrosion, Motor Structure : Single phase shaded pole motor with external rotor
Impeller: Stricked out from metal armor plate, impellers are running, with 2-lass ultra temperature protect.
‘welded to motor rotor directly and surface is treated Allowable ambient temp, range :-20°C~+65°C
by anti-corrosion grey paint Insulation resistance ; Over 100Mega ohm tested by a resistor atD)C500V.
Bearing : NMB Ball Bearing Dielectric withstanding voltage : AC1,800V at 0.5mA, 50/60Hz
Power Connection : UL3266 lead connection Insulation grade : F, Protection grade :IP54
Life : 60,000 hrs at 45°C.
No. of Blades: 7, Unit weight 1.0 ke
Specifications :
AIRE | Frequency | Aicflow | Speed | Power | Current | Noise | “yx Stic
folie | He | CEM | mm | Wo | Amps. | cap) | Pres
ee ee
Voltage
VAC
This specification i for reference only, Its subject to change without ay prior otce
Outline
Visit us at - http://www.nisiki.netNISIKI
AC AXIAL FAN
| Characteristic Curves
NIS22080HB2
Material
Frame : Die-casting AZ19D Magnesium Alloy, treated with
Impeller: Stricked out from metal armor plate, impellers are
welded to motor rotor directly and surface is ant
corrupted & finished by ka Electrophoresis
Bearing : NSK Ball Bearing
Power Connection : PA-10 (terminal connection)
Specifications :
General Specifications
Motor Structure : Single phase motor with external rotor inducted by
4 running capacitor,
Motor Protection : Ultra temperature protection under high speed,
‘Automatic protection under half or low speed.
Allowable ambient temp. range :-20°C~+80°C (Operating)
30°C-+90°C (Storage)
Insulation resistance : Over 100Mega ohm tested by a resistor atD)C500V.
Dielectric withstanding voltage : AC 2,500V at 0.5mA, 50/60H2
Insulation grade ; F; Protection grade : IP55
Life : 80,000 hrs a€ 45°C, 45,000 hire at 60°C
No. of Blades: 9, Unit weight: 2.0 ke
Starting
Vole
VAC
Frequency | Airflow
He CPM
Max Static
Pressure
Pa
Speed | Power | Current | Noise
rpm | Wo | Amps. | (dB)
540)
180 50/60 a
24507 | 65) | 0.297
2700 |_75_| oss | 5%6' | 120/120
Outline
Visit us at - http://www.nisiki.netNISIKI
AC AXIAL FAN NIS28080 Series
| Characteristic Curves
I
aU
Material General Specifications
Frame : Die-casting AZO 1D Magnesium Alloy, treated with Motor Structure: Single phase motor with external rotor inducted by running capacitor
‘Motor Protection ; Ura temperature protection under high peed
Impeller Strcked out from metal armor plate, impellers are Automatic protection under half or low speed,
welded to motor rotor directly, Surface is anti corrosion & Allowable ambient temp. range : 20°C~+80°C (Operating), -30°C~+90°C (Storage)
and finished by ka, Electrophoresis, Insulation resistance : Over 100Mega ohm tested by a resistor atDCSO0V,
earing : NSK Ball Bearing. Dielectric withstanding voltage : AC 2,S00V at 0.5mA, 50/601
Power Connection PA-10 terial onnection Insulation yradeF Protection grade <1P33
eee Life 80,000 hrs st 45°C. 45,000 hrs at 60°C (Bal Brg.)
Specifications : Unie weigh 20 kg
= Voltage | Freq. | Gurrent | Power | Speed [Mie Air Flow | Niny, Static | Noise Capacitor
pe ve | He | amp. | W322" | tom | cra | Mam | Press(Ps) | (8) pried
z 7 1.00 2520 | 1060 | 1800 | 190 | «8 i
Eee een ete 1.30 3690 | 1150 | 1950 | 120 | 70 sia
0.19 1380 | 590 | tooo | so | 45
Nisze0e0LB1 | 230 5/500
eee 020 | 45_| 1560 | 696 | 1180 | so | 48 ;
ae 0.56 2520 | 1060 120 | 6s a
Niezepsore? '|--2 0.78 3680 | 1150 120 70 | é
Outline And of echnical cr ates and environment, samoks
orem re goto oth} ac nl toed fo compas,
Drei fr
s0+0.2.
Visit us at - http://www.nisiki.net