Professional Documents
Culture Documents
1600 I Engine Bay 28 Pin Connector Pinout
1600 I Engine Bay 28 Pin Connector Pinout
Purpose
Fuel Injectors (+)
Fuel Injectors (Ground)
Wire Colour
Red
Black
Brown or
Brown/Red
Brown/White
Positive connection for the following (to approx 1997):- Idle Speed Stabiliser
- Magnetic Valve
- Ignition Module (pins 3, K-Line and 15 ??)
Note: This pin is not connected on later vehicles.
Black
6
7
8
9
Green/Black
Black
Brown or
Brown/White
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Green/Red
Green/Yellow
Green/Black
Red/Black
Blue
Green/Red
Brown
Blue
Lilac/Black
Black/Grey
Black
Black
27
28
(not connected)
White
Black/Yellow
Mexican Beetle 1600i 28 pin Connector Installation/Removal:The photo below (on the left) shows the engine bay connector locked correctly
in place:-
Connector installed.
To unplug the engine bay connector from the bodys wiring harness, do the
following:-
Re-installation is the reverse of removal. Make sure that the notches align
correctly as shown in the above left photo.
This document was originally written in German on the 1600i website and has
been written in English (in my own words) by Phil Ade, Tuesday 27 th June
2006.