Professional Documents
Culture Documents
Isilon 100 045 Respuestas
Isilon 100 045 Respuestas
file system, which of the following is the approximateusable capacity of the cluster?
(Choose 1)
A. Approximately 1/3 of the raw capacity of the cluster
B. Approximately 1/2 of the raw capacity of the cluster
C. Approximately 2/3 of the raw capacity of the cluster
D. Approximately 1/4 of the raw capacity of the cluster
When a cluster is configured, a default NFS export is created.
Which of the following statements about the default export is correct? (Choose 1)
A. The directory /ifs is exported for all hosts in read-only mode.
B. The directory /ifs is exported for all hosts
C. The default export is only accessible via NFS version 2. To enable NFS version 3, the
export configuration must be modified.
D. The directory /isilon is exported for all hosts
Which of the following commands will show alert information from the command line
interface? (Choose 1)
A. isi services
B. isi alerts
C. isi_alert_info
D. isi perfstat
Which of the following statements about the internal network configuration of a IQ 1920
cluster are false? (Choose 2)
A. Nodes do not need to have anInternal interface configured.
B. All nodes can be connected via the Internal-A and Internal-B interfaces.
C. Nodes must have at least oneInternal interface configured.
D. All nodes must have the Internal-B interface connected
A CIFS share and a NFS export can have the same root directory? (True/False)
A. True
B. False
Which of the following conditions will activate the red Alert light on the front of a node?
(Choose 2)
A. A Critical (C) Alert for that node
B. A Critical (C) Alert for the cluster
C. A Warning (W) Alert for the cluster
D. An Informational (I) Alert for that node
Which of the following statemen ts about clients connecting to no des is most accurate?
(Choose 1)
A. For reads, clients must connect to the node of the cluster that contains the file that the
user is requesting. Clients can connect to any node of the cluster to write data.
B. Clients must connect to node 1 to read and write data.
C. Clients can connect to any node of the cluster in order to read and write data.
D. Clients can connect to any nodeof the cluster to read data, but they must connect to
node 1 to write data.
You have a cluster with SmartConnect configured. One node of the cluster goes down due
to a power failure.
What is the expected behavior of SmartConnect with respect to new client connections?
(Choose 1)
A. New client connections will be directed to any node of the cluster
B. New client connections will be directed tonode 1 of the cluster until the DOWN node
comes back online.
C. New client connections will not be directed to the node in a DOWN state
D. New client connections will be suspended until the DOWN node comes back online.
Which of the following describes the function of the integration between SnapshotIQ and
Volume Shadow Copy Service (VSS)? (Choose 1)
A. SnapshotIQs VSS integration allows Windows clients to take snapshots of files and
directories from within Windows Explorer
B. SnapshotIQs VSS integration allows Windows clients to manage file sharing
configuration from within Windows Explorer
C. SnapshotIQs VSS integration allows Windows clients to view and restore previous
versions of files inside of Windows Explorer.
D. SnapshotIQs VSS integration allows Windows clients to backup data from the cluster to
local storage.
Which of the following pieces of information are required to join a Windows Active
Directory domain? (Choose 2)
A. LDAP server name
B. Username and password of a user with proper administrative rights
C. Name of Active Directory domain
D. Workgroup name
E. Share name
How much RAM does one IQ 3000 node contain? (Choose 1)
A. 1 GB
B. 2 GB
C. 4 GB
D. 8 GB
You have a five node IQ 1920 cluster protected at+2.
Which of the following statements about this configuration are correct? (Choose 2)
A. Two nodes of the cluster can fail without causing data loss
B. Three nodes of the cluster can fail without causing data loss
C. Node 1, node 2, and a disk drive in node 3 can fail simultaneously without causing data
loss
D. One drive in node 1 and one drive in node 2 can fail simultaneously without causing
data loss
Which of the following are valid ways to add anunconfigured node to a cluster? (Choose 2)
A. From the WebAdmin of the unconfigured node
B. From the cluster WebAdmin.
C. From the serial console of the unconfigured node.
D. Via a SNMP command to the cluster
After configuring a cluster, the default state of the FTP service is enabled. (True/False)
A. True
B. False
How does an Isilon cluster running OneFS 6.5 enable file level access to Windows
clients?(Choose 1)
A. Using SMB only
B. Using CIFS and SMB
C. Using CIFS and Samba
D. Using CIFS only
What is the maximum tape block size supported by OneFS 6.5? (Choose 1)
A. 8 K
B. 64 KB
C. 128 KB
D. 256 KB
The NLM protocol is used in some NFS client connections. What does the NLM protocol
do?(Choose 1)
A. Provides file locks for NFS v2 and 3 clients
B. Provides file locks for CIFS clients
C. Provides file locks for NFS v2, 3, and 4 clients
D. Provides file locks for SMB v1,2, and 3 clients
2
The unlicensed version of SmartPools enables you to do what? (Choose 1)
A. Automatically move files from one disk pool to another
B. Define a subgroup of nodes to allow 12000X nodes and 36000X nodes to reside in a
single disk pool
C. Force writes into the virtual hard disks.
D. Block manually configured file policies.
How are disk pools provisioned? (Choose 1)
A. The cluster automatically creates disk pools.
B. By network provisioning rules.
C. By disk provisioning rules.
D. They must be manually created.
You are configuring a synchronization between two clusters using SyncIQ. Youre root
directory is /ifs/data. You create an include statement for /ifs/data/media and an exclude
statement of /ifs/data/public. What will be synchronized to the other cluster? (Choose 1)
A. Nothing will be synchronized.
B. Everything in the ifs/data folder will be synchronized.
C. Everything in the ifs/data folder except the /ifs/data/public folder will be synchronized.
D. Everything in the /ifs/data/media folder and the /ifs/data/public folder will be
synchronized.
E. Everything in the /ifs/data/media folder will be synchronized.
F. Everything in the ifs/data/public folder will be synchronized.
3
For what reasons would you increase the default Ethernet frame MTU on an Isilon cluster?
(Choose 3.)
A. To match the frame size of the client system.
B. To improve overall performance.
C. To increase the LUN I/O performance.
D. There is no good reason to change the default Ethernet frame size. It is automatically
optimized for performance.
E. To provide easier trace captures.
How do you enable anti-virus scanning service for an Isilon cluster? (Choose 1)
A. Click Enable on the Anti-virus Summary page
B. Install an ICAP server
C. Configure all of the settings on the Anti-virus Summary page
D. Install an ICMP server
When setting a new disk pool protection level, what should the administrator do to apply
the new protection level to existing data? (Select the best answer.)
A. The administrator should run the isi protect command to apply the new protection level.
B. The administrator should run the isi migrate command to apply the new protection level.
C. Nothing. The cluster applies the new protection level automatically to existing data.
D. Nothing. You cannot apply new protection level settings until you complete an entire
cluster reboot.
4
Which of the following directory services is not supported by an Isilon cluster? (Choose 1)
A. Active Directory
B. LDAP
C. NIS
D. NIS+
E. All are supported.
Which of the following best describes a Network Provisioning rule? (Choose 1)
A. You can define one subnet per cluster and one pool per subnet.
B. You can define one subnet per cluster and multiple pools per subnet.
C. You can define multiple subnets per cluster and one pool per subnet.
D. You can define multiple subnets per cluster and multiple pools per subnet.
What is the maximum number of nodes supported by an Isilon cluster? (Choose 1)
A. 48
B. 64
C. 96
D. 128
E. 144
What should you name the account that runs the Isilon for vCenter Plug-in? (Choose 1)
A. vapi
B. api
C. vCenter
D. vm
What are versions of NFS are enabled by default in an Isilon cluster? (Choose 1)
A. Versions 1 and 2
B. Versions 1, 2, and 3
C. Versions 2 and 3
D. Versions 3 and 4
E. Versions 2, 3, and 4
When representing a cluster protection level as N+M:B, what is B? (Choose 1)
A. The number of recoverable disk failures.
B. The number of data blocks.
C. The number of recoverable node failures.
D. The number of data stripes.
A five node 36NL cluster is operating with 50% of its storage capacity used. After a
hardware node failure, which of the following statement are true? (Choose 2.)
A. No action is needed, the data is automatically regenerated by FlexProtect.
B. The administrator must initiate a smartfail action to reprotect the data.
C. When the node stopped responding the cluster automatically started regenerating the
missing data.
D. The administrator receives notification that the node is offline. No other automatic action
is taken.
You have a three node cluster with node three showing a state of DOWN in the isi status
command output. Which of the following are possible causes for this state? (Choose 2)
A. Node three has lost power.
B. Node three has lost a disk drive.
C. Node three has lost two or more disk drives.
D. Node three has an unplugged InfiniBand cable.
E. Node three has too many clients connected at the same time.
SmartConnect management zones are configured at what level? (Choose 1)
A. They can only be configured for the entire cluster.
B. They can only be configured per subnet.
C. The can only be configured per pool.
D. They can be configured at the subnet or pool level.
What is the default setting for a virtual hot spare for the cluster? (Choose 1)
A. Space is saved that is equivalent to one drive on the node with the lowest LNN.
B. Space is saved that is equivalent to a node on the node with the lowest LNN.
C. All freespace in the cluster is used for a virtual hot spare.
D. An Isilon cluster does not use a virtual hot spare.
FilePools enable you to do what? (Choose 1)
A. Create user defined attributes in the web administration interface.
B. Set different protection and IO optimization settings for a filtered set of files
C. Copy files access settings for all files
D. Throttle network throughput as needed for file storage
To configure redundancy for the internal node network, how many non-overlapping sets of
IP addresses are required? (Choose 1)
A. None. The internal node network does not use TCP/IP.
B. 1
C. 2
D. 3
When configuring anonymous access for FTP, what account must you use? (Choose 1)
A. You do not need to configure any account for anonymous access.
B. You must use an account named FTP.
C. You must use an account named Anonymous.
D. You can use any account.
Which features are supported when using an Isilon cluster as a virtualization datastore?
(Choose 3)
A. Dynamic IP addressing
B. SmartStoreIQ
C. SmartConnect Advanced
D. NFS failover
E. SMB failover
You are trying to increase performance on a SyncIQ job between two five node clusters.
What value should you set in the Workers Per Node setting? (Choose 1)
A. 2
B. 4
C. 8
D. 16
E. 40
Your customer believes that the performance of the cluster is too slow. What hardware
changes would you recommend to them to improve performance for searching and
indexing and tree walks? (Choose 1)
A. NL nodes.
B. EX nodes because clients cannot connect to them.
C. SSD based nodes to store metadata and inodes.
D. A second internal InfiniBand network.
Which of the following can be used to implement a Streaming disk access pattern on an
Isilon cluster? (Choose 2).
A. isi auth command
B. File Pool Policies
C. sysctl command
D. File System Explorer
You just licensed SnapShotIQ on a customers OneFS v6.5 cluster. Which of the following
statements is true? (Choose 1)
A. You can now select COW or PIT snapshot use, as needed.
B. You can now replicate data using SyncIQ from a snapshot.
C. Your snapshot files are now read/write.
D. You now implement Volume Shadow Copy Service for clients.
What is the largest size of LUN that is usable by a Windows client when using Isilon
iSCSI? (Choose 1)
A. 16 TB
B. 32 TB
C. 64 TB
D. 128 TB
How do you edit the settings of a quota that is linked to a default quota? (Choose 2)
A. You cannot change the settings of a linked quota.
B. You must unlink the quota before you can edit the settings.
C. You can edit the settings of a linked quota at any time.
D. You can change the settings in a linked quota by editing the default quota.
E. You cannot change the settings of a default quota.
What data protection level is assigned to an 8KB file in OneFS? (Choose 1)
A. 8KB files do not have any data protection.
B. 8KB files are individually assigned a data protection level by the administrator.
C. 8KB files are mirrored.
D. 8KB files are protected with the clusters data protection level.
Which of the following is true about support for IPv6 addresses on an Isilon cluster?
(Choose 1)
A. IP version 6 addresses are not supported on an Isilon cluster.
B. IPv6 addresses are not supported on the internal internode network
C. IPv6 addresses are not supported on the external network used for cluster clients.
D. There are no restrictions on using IPv6 addresses
An Isilon cluster automatically mirrors files of a certain size or smaller. What is that file
size? (Choose 1)
A. 8 KB
B. 64 KB
C. 128 KB
D. 256 KB
E. 512 KB
How are inodes are allocated in an Isilon cluster? (Choose 1)
A. Inodes are allocated as needed
B. Inodes are allocated as needed up to a maximum of 128 per directory
C. 1024 inodes are allocated
D. 1024 inodes are allocated per directory
What are the default NFS and SMB permissions set on the /ifs export? (Choose 1)
A. No access for all (NFS) and no access for everyone (SMB).
B. No access for users, full control for administrators (both NFS and SMB).
C. Read and execute for all (NFS) and read and execute for everyone (SMB).
D. Full access for all (NFS) and full access for everyone (SMB).
Which of the following is true about SmartConnect Basic? (Choose 1)
A. You can define one subnet per cluster and one pool per subnet.
B. You can define one subnet per cluster and multiple pools per subnet.
C. You can define multiple subnets per cluster and one pool per subnet.
D. You can define multiple subnets per cluster and multiple pools per subnet.
Which of following NIC aggregation protocols are supported by an Isilon cluster? (Choose
2)
A. LACP
B. Etherchannel
C. FCE
D. Legacy LACP
E. EtherFCE
What is the correct command to use for modifying file pools? (Choose 1)
A. isi smartpools filepools FilepoolName action
B. There are no isi commands for file pools, so the web administration interface should be
used.
C. The isi commands are very difficult to learn, so the web administration interface should
be used.
D. isi sp fp FilepoolName action
If a file pool policy changes the protection level of a file or folder, what job runs to change
that setting? (Choose 1)
A. FlexProtect
B. SmartPools
C. SetProtectPlus
D. SmartFail
E. Protection
Which of following are true about the SmartConnect Service IP address? (Choose 2)
A. It must be assigned to a physical network interface card on the node that has the lowest
LNN.
B. It must be assigned to one physical network interface card on any node in the cluster.
C. It must be a virtual IP that is not assigned to any physical network interface card.
D. It must not be in the IP subnet used by the cluster.
E. It must be in the IP subnet used by the cluster.
Which of the following is true about files and viruses? (Choose 1)
A. All files types cause an equal risk
B. Only executable files are a risk
C. One script files are a risk
D. Only virtualization files are at risk
What is the maximum size of an NFS datastore that can be used for virtualization on an
Isilon cluster? (Choose 1)
A. 100 GB
B. 32 TB
C. 600 TB
D. 15 PB
Which backup type provides the best data consistency? (Choose 1)
A. hot
B. warm
C. cold
D. All types of VM datastore backups provide the same level data consistency.
You have a cluster that has three disk pools and has global namespace acceleration
(GNA)
enabled. How can you configure which disk pools benefit from GNA? (Choose 1)
A. You cant. GNA is enabled for all disk pools and is cannot be configured beyond that.
B. You do not need any additional configuration. GNA is only applied to a single disk pool
within a cluster.
C. You can configure the SSD strategies settings to avoid one or more disk pools.
D. Before you enable GNA, you can select to which disk pool GNA settings apply.
What is the minimum number of storage nodes needed to implement N+2 protection to an
Isilon cluster so that the cluster stays in read/write mode if two nodes fail? (Choose 1)
A. 1
B. 3
C. 5
D. 7
E. 9
What settings does changing the disk access pattern affect? (Choose 2)
A. Data layout on disks within a node
B. File system stripe size
C. Pre-fetching
D. Disk block size
A legal e-discovery company provides a hosting service that organizes and stores seldom
used content for up to 10 years. Which cluster configuration is the most appropriate?
(Choose 1)
A. A five node X200 cluster.
B. A five node X200-SSD cluster.
C. A ten node 36NL cluster.
D. A 25-node S200 cluster.
A job is running with a low priority when a higher priority job starts. What happens to the
lower priority job? (Choose 1)
A. The lower priority job continues to run until completion.
B. The lower priority job is elevated to higher priority.
C. The lower priority job is paused.
D. The lower priority job is cancelled.
Which file access protocols are enabled by default in an Isilon cluster? (Choose 2)
A. SMB
B. CIFS
C. NFS
D. HTTP
E. FTP
What types of data stores are supported for virtualization on an Isilon cluster? (Choose 2)
20
A. VMFS
B. iSCSI
C. NFS
D. SMB
Which command lists the information provided on the Cluster Status page in the web
administration interface? (Choose 1)
A. isi admin
B. isi status
C. isi cluster status
D. isi admin status
When configuring default File Pool Policy settings, selecting Same as data pool when
specifying the Snapshot pool allows you to: (Choose 1)
A. Assign snapshots to disk pools according to the same settings that are configured for
data
pools.
B. Assign snapshots to file pools according to the same settings that are configured for
data pools.
C. Assign snapshot pools for file pool use.
D. Assign filtered files to snapshot pools without restriction.
What methods can be utilized to discover critical events on the cluster? (Choose 3.)
A. isi status
B. isi status list
C. isi events
D. The Cluster Status page that you open by selecting Status from the Cluster Status
menu in the web administration interface.
Which of the following is true about SmartConect Basic? (Choose 1)
A. You can define one subnet per cluster and one pool per subnet.
B. You can define one subnet per cluster and multiple pools per subnet.
C. You can define multiple subnets per cluster and one pool per subnet.
D. You can define multiple subnets per cluster and multiple pools per subnet.
What is the default impact policy level of a FlexProtect job? (Choose 1)
A. Low
B. Medium
C. High
D. There is no default. The priority of each job must be set by an administrator.
You are configuring a synchronization between two clusters using SyncIQ. Youre root
directory is /ifs/data. You create an include statement for /ifs/data/media and an exclude
statement of /ifs/data/media/video. What will be synchronized to the other cluster?
(Choose 1)
A. Nothing will be synchronized.
B. Everything in the ifs/data folder will be synchronized.
C. Everything in the /ifs/data/media folder will be synchronized.
D. Everything in the /ifs/data/media folder except the /ifs/data/media/video folder will be
synchronized.
With the new Repair Permissions Job in OneFS v6.5, what three permission tasks are you
able to select from? (Choose 3)
A. Convert permissions
B. Clone permissions
C. Delete permissions
D. Inherit permissions
E. Reconstruct permissions
A cluster is running OneFS v6.5. The customer attempts to add a node to the cluster that
is running OneFS v5.5.6. How will the cluster respond when the node is added? (Choose
1)
A. The cluster will take no action. The cluster does not perform an OneFS version check
on new nodes.
B. The cluster will take no action. Different OneFS versions on nodes within a single
cluster do not cause any issues.
C. The cluster will automatically reimage the node to match the clusters OneFS version.
D. The administrator is prompted to downgrade the cluster to OneFS v5.5.6 to match the
newly added node.
When should you run an OVT check? (Choose 1)
A. Never. Only Isilon Support runs OVT checks.
B. After a production cluster is experiencing performance issues
C. After a hard disk is replaced on a cluster.
D. Before a newly created cluster is connected to the production network.
What are the minimum requirements in order to run Global Name Space Acceleration with
SSDs?(Choose 2)
A. 5% of total cluster capacity needs to be SSDs.
B. 2% of total cluster capacity needs to be SSDs.
C. 20% of the number of nodes need to have one or more SSDs drives in them.
D. All nodes need to have one or more SSD drives in them.
You are configuring a synchronization between two clusters using SyncIQ. Youre root
directory is /ifs/data. You create an include statement for /ifs/data/media and an exclude
statement of /ifs/data/media/video. What will be synchronized to the other cluster?
(Choose 1)
A. Nothing will be synchronized.
B. Everything in the ifs/data folder will be synchronized.
C. Everything in the /ifs/data/media folder will be synchronized.
D. Everything in the /ifs/data/media folder except the /ifs/data/media/video folder will be
synchronized.
What are the available methods for notifying cluster administrators of critical events?
(Choose 1)
A. Email only
B. Email and SMTP
C. Email and SNMP
D. Email or SNMP
What is the minimum number of storage nodes needed to implement N+3 protection to an
Isilon cluster so that the cluster stays in read/write mode if three nodes fail? (Choose 1)
A. 1
B. 3
C. 5
D. 7
E. 9
What is the default setting for the data access pattern on a LUN created on an OneFS 6.5
cluster?
(Choose 1)
A. Random
B. Concurrency
C. Streaming
D. Dynamic
When configuring the Default File Pool Policy settings, selecting Any pool when specifying
the data pool results in what action: (Choose 1)
A. Define default file pool policies for the default file pool.
B. Use the isi file pools commands.
C. Assign storage pools for file pool use.
D. Store a filtered set of files on all disk pools.
What does the Rebalance Policy control? (Choose 1)
A. Whether or not NFS failover occurs.
B. How static IP addresses are distributed to the nodes during NFS failover.
C. How dynamic IP addresses are distributed after a failed node comes back online.
D. How IP addresses are distributed among the nodes when NFS failover occurs.
In OneFS v5.5 the default protection level was N+1. What is the default protection level in
OneFS v6.5 with at least an 18TB cluster? (Choose 1)
A. +2:1
B. +2
C. +3:1
D. +3
When can you implement a rolling upgrade to OneFS? (Choose 1)
A. Only for firmware updates
B. Only for minor OS upgrades
C. For minor and major OS upgrades
D. All upgrades can be rolling